无线传感器网络中假设检验的传感器选择问题

无线传感器网络通常具有带宽限制和能量约束,这就涉及到传感器的选择问题,即如何在n个传感器中选取p个,使得仅由这p个传感器的观测进行假设检验时虚警率达到最小.这类问题已被证明是NP难的.本文将该问题松弛成一个易处理的新问题,并提出了一个可以达到新问题KKT点的高效算法.通过与已有的算法比较复杂度,本文提出的算法效率更高.同时仿真结果也表明,大多数情况下我们提出的算法均可达到全局最优解.     

汉江中下游硅藻群落时空分布及其影响因素研究

为研究汉江中下游水体和沉积物硅藻的时空分布特征及其影响因素, 于2014年春、秋两季对汉江中下游5个监测断面的硅藻群落进行监测。基于18S rRNA Illumina Miseq高通量测序技术的鉴定结果, 共得到硅藻3纲28目49科111属160种, 其中沉积物硅藻占98.6%。物种丰度显著多于已有研究的结果, 体现了高通量测序技术在硅藻物种鉴定上的优势。水体和沉积物硅藻群落组成和优势种有显著差异, 水体中硅藻优势种为Pinnularia, Cyclotella和Nitzschia, 沉积物中硅藻优势种为Pinnularia, Nitzschia和Navicula。汉江中下游硅藻群落多样性的时空差异明显, 硅藻多样性存在空间异质性, 且沉积物硅藻比水体硅藻多样性丰富; 在季节影响方面, 表现为秋季硅藻物种多样性比春季丰富。总氮、氨氮、硝态氮和总磷等环境因素对硅藻群落组成影响较大, 因此氮磷控制对避免汉江中下游硅藻水华发生具有重要意义。     

铜绿微囊藻与浮萍联合生长的生物学效应及其对污水环境指标的影响

本实验以1/5的Hoagland溶液为培养液,设置0、20、40、60、80、100 mL/L六个铜绿微囊藻（FACHB 930,107 cells/mL）接种梯度与少根紫萍（ZH0051,400 g/m2）共培养.结果发现,少根紫萍的生长速率、抗氧化物酶活性（SOD、APX和CAT）以及培养液中微囊藻毒素含量随着铜绿微囊藻接种量的增加呈现出先升高后降低的趋势,而少根紫萍体内微囊藻毒素却先降低后升高,淀粉累积量呈现出逐渐下降的趋势.铜绿微囊藻的接种量为20 mL/L时,少根紫萍的生长速率达到最大值（3.64 g/m2·d）.当接种量在60~80 mL/L之间时,少根紫萍能从培养液中高效的移除氮、磷.实验结果表明,当水体中铜绿微囊藻浓度在2.0×108 cells/L（接种量为20 mL/L）左右时,少根紫萍能够达到最大的生物量、相对高的淀粉累积量、以及高品质的氮磷去除率,并能有效地抑制铜绿微囊藻的生长.     

Generalized Intersection Bodies with Parameter

AIn 2005, the classical intersection bodies and L_p intersection bodies were extended. Afterwards, the concept of general L_p intersection bodies and the generalized intersection bodies was introduced. In this paper, we define the generalized bodies with parameter. Besides, we establish the extremal values for volume, Brunn-Minkowski type inequality for radial combination and L_p harmonic Blaschke combination of this notion.     

优选发酵毕赤酵母与酿酒酵母混合发酵的葡萄酒酿造应用潜力

实验基于主要发酵副产物的生成含量评价优选发酵毕赤酵母与酿酒酵母混合发酵对葡萄酒质量的影响。采用优选发酵毕赤酵母Z9Y-3和商业酿酒酵母F33设计同时和顺序两种接种方式启动模拟葡萄汁的酒精发酵,以酿酒酵母和发酵毕赤酵母单菌株发酵为对照。琥珀酸和乳酸利用高效液相色谱法测定,甘油采用高碘酸钠氧化法分析,挥发酸采用水蒸气蒸馏法测定。结果显示,优选菌株参与下的发酵没有显著影响酒精发酵的进程,但在发酵过程中发酵毕赤酵母生长速率低于酿酒酵母。与酿酒酵母纯发酵相比,混合发酵提高了甘油的含量,降低了挥发酸的含量,其中顺序接种的发酵过程中酿酒酵母活菌数最高,发酵毕赤酵母存活期最长(7d),发酵过程中甘油累积量最高(2.7g/L),挥发酸含量最低(0.2g/L)。不同发酵处理中,琥珀酸和乳酸含量均呈现先增后降的趋势,但其最终含量变化不显著。综上可得,优选发酵毕赤酵母和酿酒酵母的混合发酵具有应用于葡萄酒酿造的应用潜力。     

4株水果采后链格孢属真菌的rDNA ITS区序列与碳源代谢指纹图谱差异性分析

从采后贮藏过程中发病的冬枣、樱桃、杏及蓝莓果实中分离到4株丝状病原真菌231#、320#、322#和333#。由形态学特征观察可确定4株病原菌均为链格孢属真菌(Alternaria Nees),rDNA ITS区序列进化树分析结果表明樱桃320#和杏322#与A. alternata (AY625056.1)处于同一分枝,置信度达100%;而蓝莓333#与A. tenuissima (KP324980.1)处于同一分枝,冬枣231#与蓝莓333#和A. tenuissima (KP324980.1)的亲缘性很近,在同一分支上的置信度达100%。对95种碳源的代谢指纹图谱分析的结果表明,4株链格孢属真菌对吐温80、N-乙酰-D-葡萄糖胺、N-乙酰-β-D-甘露糖胺等86种碳源的代谢特征相同,包括78种最适碳源和8种不可利用碳源,其中冬枣231#与A. alternata (Fr.) Keissl的代谢指纹图谱最为相近。4株链格孢属真菌的ITS区序列系统进化树分类与碳源代谢聚类分析结果存在一定差异。     

Solid-phase synthesis of Cu<Subscript>2</Subscript>MoS<Subscript>4</Subscript> nanoparticles for degradation of methyl blue under a halogen-tungsten lamp

The Cu₂MoS₄ nanoparticles were prepared using a relatively simple and convenient solid-phase process, which was applied for the first time. The crystalline structure, morphology, and optical properties of Cu₂MoS₄ nanoparticles were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, field emission scanning electron microscopy, and UV-vis spectrophotometry. Cu₂MoS₄ nanoparticles having a band gap of 1.66 eV exhibits good photocatalytic activity in the degradation of methylene blue, which indicates that this simple process may be critical to facilitate the cheap production of photocatalysts.     

TTAC-HPMo/SiO_2催化剂的表征及其氧化脱硫性能分析

以十四烷基三甲基氯化铵(TTAC)为模板剂,正硅酸乙酯(TEOS)为硅源,采用溶胶-凝胶法制备TTAC-HPMo/SiO_2催化剂,利用FTIR、XRD、SEM和N_2吸附-脱附等技术对其进行表征,并分析催化剂制备条件和反应条件对模型油氧化脱硫性能的影响。结果表明,在m(HPMo)/m(SiO_2)=15%、焙烧温度为400℃条件下所制TTAC-HPMo/SiO_2催化剂,其孔隙结构发达、氧化脱硫性能最佳;对于10mL以二苯并噻吩(DBT)为目标含硫化合物的模型油(硫含量为400μg/g),当m(TTAC-HPMo/SiO_2)/m(模型油)=0.43%、V(H_2O_2)/V(模型油)=0.2%、反应温度为60℃、反应时间为14min时,所制TTAC-HPMo/SiO_2催化剂对模型油中DBT的脱除率达到100%。     

Effects of Zn content on the microstructure and the mechanical and corrosion properties of as-cast low-alloyed Mg–Zn–Ca alloys

The effects of Zn content on the microstructure and the mechanical and corrosion properties of as-cast low-alloyed Mg–xZn–0.2Ca alloys (x=0.6wt%, 2.0wt%, 2.5wt%, hereafter denoted as 0.6Zn, 2.0Zn, and 2.5Zn alloys, respectively) are investigated. The results show that the Zn content not only influences grain refinement but also induces different phase precipitation behaviors. The as-cast microstructure of the 0.6Zn alloy is composed of α-Mg, Mg₂Ca, and Ca₂Mg₆Zn₃ phases, whereas 2.0Zn and 2.5Zn alloys only contain α-Mg and Ca₂Mg₆Zn₃ phases, as revealed by X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses. Moreover, with increasing Zn content, both the ultimate tensile strength (UTS) and the elongation to fracture first increase and then decrease. Among the three investigated alloys, the largest UTS (178 MPa) and the highest elongation to fracture (6.5%) are obtained for the 2.0Zn alloy. In addition, the corrosion rate increases with increasing Zn content. This paper provides an updated investigation of the alloy composition–microstructure–property relationships of different Zn-containing Mg–Zn–Ca alloys.     

Effect of particle size distribution on the microstructure,texture,and mechanical properties of Al–Mg–Si–Cu alloy

The effect of particle size distribution on the microstructure,texture,and mechanical properties of Al–Mg–Si–Cu alloy was investigated on the basis of the mechanical properties,microstructure,and texture of the alloy.The results show that the particle size distribution influences the microstructure and the final mechanical properties but only slightly influences the recrystallization texture.After the pre-aging treatment and natural aging treatment(T4 P treatment),in contrast to the sheet with a uniform particle size distribution,the sheet with a bimodal particle size distribution of large constituent particles and small dispersoids exhibits higher strength and a somewhat lower plastic strain ratio(r) and strain hardening exponent(n).After solution treatment,the sheet with a bimodal particle size distribution of large constituent particles and small dispersoids possesses a finer and slightly elongated grain structure compared with the sheet with a uniform particle size distribution.Additionally,they possess almost identical weak recrystallization textures,and their textures are dominated by CubeND {001}310 and P {011}122 orientations.