存储特定流数据的通用框架

通过仔细研究存储流数据的各种应用的共同特征,提出了一种数据流存储模型.在数据流存储模型基础上,采用先进的基于组件的开发方法,实现了一个存储流数据的通用框架,通用框架采用本体技术来解决语义互操作性.测试结果表明,通用框架可以调用一组用户提供的过滤算法,筛选出指定数据流中符合条件的信息,将它们成批存储到数据库中.用户可以通过定制和配置参数的方法,在各种不同的应用环境中重用该通用框架.     

移相控制双全桥电力电子变压器的稳态特性

分析了移相控制双全桥电力电子变压器的工作原理，通过系统状态空间模型分析，得到了等效变压器模型及其外特性曲线，给出了该模型的等效变比及等效内阻的表达式，从模型本质上证明了电力电子变压器对于传统工频变压器的在系统功能上的可替代性和可扩展性，最后通过仿真实验验证了理论分析的正确性。     

论大学生的创新素质与文化素质

大学生创新素质的培养是实现中华民族伟大复兴和追求受教育者个人充分自由发展的必然要求。创新素质包括创新意识、创新思维、创新精神、创新能力、创新人格五方面基本要素,而在个人身上的特定表现就是个性。大学的文化素质教育在优化学生的知识结构、提供优秀的思维训练、陶冶道德情操、塑造健全人格、培养丰富的个性及营造创新文化生态环境等方面具有不可代替的作用,因此,大学应十分注重文化素质教育的开展。     

基于改进模糊C均值聚类的弥散张量成像图像分割

为了避免随机选取初始聚类中心点的缺陷,利用最大最小距离的方法确定初始聚类中心点.实验结果表明,和传统的模糊C均值聚类(FCM)算法相比,所提聚类算法具有较高的稳定性和准确性,所分割的胼胝体图像边缘信息更加清晰.     

Generalized Intersection Bodies with Parameter

AIn 2005, the classical intersection bodies and L_p intersection bodies were extended. Afterwards, the concept of general L_p intersection bodies and the generalized intersection bodies was introduced. In this paper, we define the generalized bodies with parameter. Besides, we establish the extremal values for volume, Brunn-Minkowski type inequality for radial combination and L_p harmonic Blaschke combination of this notion.     

Solid-phase synthesis of Cu<Subscript>2</Subscript>MoS<Subscript>4</Subscript> nanoparticles for degradation of methyl blue under a halogen-tungsten lamp

The Cu₂MoS₄ nanoparticles were prepared using a relatively simple and convenient solid-phase process, which was applied for the first time. The crystalline structure, morphology, and optical properties of Cu₂MoS₄ nanoparticles were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, field emission scanning electron microscopy, and UV-vis spectrophotometry. Cu₂MoS₄ nanoparticles having a band gap of 1.66 eV exhibits good photocatalytic activity in the degradation of methylene blue, which indicates that this simple process may be critical to facilitate the cheap production of photocatalysts.     

TTAC-HPMo/SiO_2催化剂的表征及其氧化脱硫性能分析

以十四烷基三甲基氯化铵(TTAC)为模板剂,正硅酸乙酯(TEOS)为硅源,采用溶胶-凝胶法制备TTAC-HPMo/SiO_2催化剂,利用FTIR、XRD、SEM和N_2吸附-脱附等技术对其进行表征,并分析催化剂制备条件和反应条件对模型油氧化脱硫性能的影响。结果表明,在m(HPMo)/m(SiO_2)=15%、焙烧温度为400℃条件下所制TTAC-HPMo/SiO_2催化剂,其孔隙结构发达、氧化脱硫性能最佳;对于10mL以二苯并噻吩(DBT)为目标含硫化合物的模型油(硫含量为400μg/g),当m(TTAC-HPMo/SiO_2)/m(模型油)=0.43%、V(H_2O_2)/V(模型油)=0.2%、反应温度为60℃、反应时间为14min时,所制TTAC-HPMo/SiO_2催化剂对模型油中DBT的脱除率达到100%。     

分级多孔纳米炭纤维的结构及电容性能

以酚醛树脂为碳源、PVP为纺丝助剂、纳米MgO颗粒为模板剂,通过静电纺丝法制得酚醛树脂基纳米炭纤维,经过炭化、KOH活化、酸洗后得到分级多孔纳米炭纤维,利用SEM、XRD、XPS、拉曼光谱仪及氮气吸脱附实验,对所制多孔纳米炭纤维的结构和形貌进行表征,并将其作为模拟电容器的电极,利用循环伏安、恒电流充放电及交流阻抗方法测试了材料的电化学性能。结果表明,KOH活化引入了数量可观的微孔,所得纳米炭纤维表现出明显的"微孔-中孔-大孔"分级孔分布的特点,其比表面积达到1058.4m~2/g,总孔容为1.64cm~3/g。电化学测试结果表明,所制分级多孔纳米炭纤维在6mol/L KOH电解液中显示出优异的电容性能,在0.2A/g的电流密度下,其放电比容量达到198F/g,在20A/g电流密度下,电容保持率达到65%。     

Nb微合金化对低合金高强钢耐海水腐蚀性能的影响

利用室内模拟海水加速腐蚀试验及电化学分析,研究了Nb微合金化对Cu-Cr-Ni-P系低合金高强钢耐海水腐蚀性能的影响。结果表明,含Nb钢与不含Nb钢组织均由铁素体和珠光体构成,但Nb微合金化后钢中珠光体组织减少且晶粒细化明显,其在模拟海水介质中的平均腐蚀速率与不含Nb钢相比,降低了约12%,阳极腐蚀电流密度也有所降低。由此可见,在Cu-Cr-Ni-P系低合金高强钢中加入Nb元素有助于提高其耐海水腐蚀性能。     

Effects of Zn content on the microstructure and the mechanical and corrosion properties of as-cast low-alloyed Mg–Zn–Ca alloys

The effects of Zn content on the microstructure and the mechanical and corrosion properties of as-cast low-alloyed Mg–xZn–0.2Ca alloys (x=0.6wt%, 2.0wt%, 2.5wt%, hereafter denoted as 0.6Zn, 2.0Zn, and 2.5Zn alloys, respectively) are investigated. The results show that the Zn content not only influences grain refinement but also induces different phase precipitation behaviors. The as-cast microstructure of the 0.6Zn alloy is composed of α-Mg, Mg₂Ca, and Ca₂Mg₆Zn₃ phases, whereas 2.0Zn and 2.5Zn alloys only contain α-Mg and Ca₂Mg₆Zn₃ phases, as revealed by X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses. Moreover, with increasing Zn content, both the ultimate tensile strength (UTS) and the elongation to fracture first increase and then decrease. Among the three investigated alloys, the largest UTS (178 MPa) and the highest elongation to fracture (6.5%) are obtained for the 2.0Zn alloy. In addition, the corrosion rate increases with increasing Zn content. This paper provides an updated investigation of the alloy composition–microstructure–property relationships of different Zn-containing Mg–Zn–Ca alloys.