大跨径连续刚构桥施工控制方法

论述连续刚构桥施工控制的必要性及主要内容,并对几种常用的施工控制方法进行了介绍.     

The Mechanism about Key and Credential on Trusted Computing Platform and the Application Study

0 IntroductionPeople need a secure and dependable computing environ-ment[1]. The cryptology is known as the core of com-puter security[2]. The application of cryptologyis mainly ful-filled by key management and credential mechanism.In thispaper , we should study the key management and credentialmechanismbased ontrusted computing platform,and give theactual application of these security mechanisms for buildingtrusted computing environment .1 OverviewTrusted Computing1 .1 The Original of Trus…     

Experimental study on patterns of fault interaction

Based on the data of strain field, fault slip and acoustic emission during the deformation of some fault models, the fault interaction patterns are studied. The experiments reveal four patterns of fault interaction, i.e. static promotion or delay of earthquake, creep triggering, dynamic triggering and dynamic loading-relaxation. Promotion and delay of earthquake caused by fault interaction and mechanical property of fault combinations are preliminarily analyzed from the perspective of series and parallel connection of faults, and the relationship between patterns of fault interaction and mechanical and material properties of fault is discussed.     

An experimental study on variation of thermal fields during the deformation of a compressive en echelon fault set

The temperature variations during deformation of a compressive en echelon fault set in a rock sample were measured by a surface measurement system with multi-point platinum resistance thermometers and an infrared thermal image system. The measurements obtained by the two systems were in agreement with each other, indicating a relationship between temporal-spatial variations of the thermal field and changes of stress and strain. At varied structural positions of the rock sample, the rising of the temperature was different, implying distinct stress distributions at these positions. In the experiment, the deformation process of the sample included three stages: elastic deformation, stick-slip, and rupture. Correspondingly, the variation process of temperature had also three stages, each of which had its own temperature rising profile. And the thermal radiation field showed a similar process. These phenomena mean that the dominant mechanisms of temperature rising in all stages of deformation are different. Experimental results provide a physical basis for the study of current fault activities by using data of satellite infrared images.     

有源RCS及其应用

随着电子设备和雷达系统的迅速发展, 电磁环境变得愈加复杂。在复杂电磁环境中, 针对多辐射源和有源设备照射下雷达目标电磁散射特性评估的需求, 提出并综述了有源雷达散射截面(active radar cross section, ARCS)的定义、仿真方法和应用示例。ARCS可以计算多辐射源相干和非相干照射条件下, 雷达端观察到的视在雷达散射截面(radar cross section, RCS)值。本文给出了ARCS的仿真分析步骤, 利用仿真软件得出计算ARCS所需远场量。在单入射源情况下, ARCS等同于传统RCS, 验证了ARCS计算方法的准确性。此外, 以分布式相参雷达和有源对消目标隐身为例, 介绍了ARCS的应用, 利用ARCS的概念评估了有源对消的效果。最后, 探讨了目前研究存在的技术问题以及未来可能发展的研究方向。     

均匀带异号电荷的两圆盘之间中心轴线上电势及电场强度的解析表示

表示出了均匀带异号电荷的两圆盘之间中心轴线上电势及电场强度的解析公式。     

校办产业的作用和地位

结合高校校办产业实际，论述校办产业在高校及社会主义现代化建设中的作用和地位。     

多样本球性检验的似然比统计量的渐近分布

设Λ是检验多样本球性的修改似然比准则,本文给出了在某些接近于原假设的各择假设下Λ的非零分布的渐近展开式.     

肿瘤热疗用锰锌铁氧体纳米粒的制备及表征

以硫酸盐为原料, NaOH为沉淀剂制备了一系列MnxZn1-xFe2O4纳米粒(x=0.1,0.3,…,0.9,1.0),对其进行了X-射线衍射分析,证实其为尖晶石型锰锌铁氧体;透射电镜观察其形貌为近似球状;图像分析仪测算其平均粒径为30 nm;并进行了居里温度测定和给定交变磁场下的体外升温、恒温实验,结果显示所制备材料的居里温度随锌含量的增加而降低;在相同介质、相同质量浓度条件下,其相应磁流体体外升温实验所能达到的恒定温度亦随锌含量的增加而降低, 如在磁流体质量浓度为20 g/L时,其恒定时的温度在68～40 ℃之间.实验结果为进一步筛选出适合肿瘤热疗的材料配比及相应的质量浓度提供了理论及实验依据.     

单环刺螠不同部位中纤溶酶的分离纯化及其活性差异

对单环刺螠不同部位中的纤溶酶(UFE)进行分离纯化,并比较其活性差异.选择单环刺螠体壁肌、内脏、体腔液作为UFE的提取来源,通过离心分离、SephacrylS 100凝胶柱层析、Q-Sepharose fast flow阴离子交换层析等工艺获得UFE单一组分,采用Folin-酚试剂法测定其酶活性,并研究UFE对AT-Ⅲ,HC-Ⅱ,凝血因子和钙离子的影响,验证不同部位UFE的活性差异.结果表明:从秋季单环刺螠体腔液中提取的总蛋白质量为39.8 mg,UFE的比活力为4 695.94 mkat·g^-1,纯化倍数为13.8,明显优于内脏和体壁肌的提取所得;在抗凝作用实验中,加入体腔液中所得UFE后,标准血浆、乏AT-Ⅲ血浆和乏HC-Ⅱ血浆凝血酶原时间、凝血酶时间均极显著延长,加入不同浓度氯化钙后,能显著延长凝血时间,同时,能够极显著降低凝血因子Ⅴ,Ⅶ,Ⅷ,Ⅸ,Ⅹ,Ⅻ的活性及大鼠血液中的钙离子浓度;不同部位来源的UFE活性有较大差异,与内脏及体壁肌相比,体腔液为UFE更优提取部位.