表面处理对胶粘剂/金属界面疲劳性能的影响

对碳钢表面分别进行硅烷和磷化处理,然后用环氧树脂胶粘剂粘接. 研究了不同表面处理的胶接接头力学性能,分析了金属表面处理方法对胶粘剂/金属界面疲劳性能的影响. 在胶接接头施加疲劳载荷,测量了胶接接头疲劳前后的强度-位移曲线. 对比疲劳前后界面剪切强度的变化,采用断裂力学理论分析了界面裂纹扩展过程. 结果表明:表面经硅烷处理后,界面粘接强度最大,耐疲劳性能最好. 胶接接头的失效通常在界面发生,能量可以通过裂尖扩展释放,也可以通过粘接层的塑性变形释放.     

对广西推进金融双语教学问题的探讨

金融双语教学当前是金融教育中的热点话题,文章结合广西的实际情况,就金融教学的必要性、存在的阻碍及相关对策进行了初步的探讨.     

基于灰色GM(1,1)模型的桩基沉降预测研究

简述现有桩基沉降预测方法存在的不足,结合桩基沉降的特点,引入灰色预测GM(1,1)模型,建立基于灰色GM(1,1)模型的单桩及群桩沉降预测研究模型,并给出其建模的原理及建模的过程。最后,通过工程实例,进行实证分析,研究表明该模型具有良好的适应性,能更好地反映桩基沉降变形的规律,提高预测的精度,具有良好的工程应用价值和推广前景。     

关于LF实直线R（L）的连通性的一个证明

用一种不于同于文献［２］的方法证明了ＬＦ实直线的连通性。这种方法直观易懂，而且对ＬＦ单位区间Ｉ（Ｌ）也适用。     

Task scheduling for multi-electro-magnetic detection satellite with a combined algorithm

Task scheduling for electro-magnetic detection satellite is a typical combinatorial optimization problem. The count of constraints that need to be taken into account is of large scale. An algorithm combined integer programming with constraint programming is presented. This algorithm is deployed in this problem through two steps. The first step is to decompose the original problem into master and sub-problem using the logic-based Benders decomposition; then a circus combines master and sub-problem solving process together, and the connection between them is general Benders cut. This hybrid algorithm is tested by a set of derived experiments. The result is compared with corresponding outcomes generated by the strength Pareto evolutionary algorithm and the pure constraint programming solver--GECODE, which is an open source software. These tests and comparisons yield promising effect.     

A collision detection approach in virtual environment of micromanipulation robot

Operators suffer much diffieulty in manipulating miero-size objects without the assistance of friendly interfaces due to the scaling effects in micro worht. The paper presented a general framework for mieromanipulation robot hased on virtual reality technology. With the framework we brought forward a FDH （Fixed Direction Hulls） based hounding box method to handle the eollision ,teteetion of the peg-in-hole mieroassembly. The eollision response model for the collision between micro needle and hole was presented. The virtual three and corresponding displacement were calculated with the model of bending deformation and pressing ,teformation. Experiments verify the validity of collision response model.     

A large workspace flexure hinge-based parallel manipulator system

0IntroductionParallel-structure manipulators are attracting moreattentionfromthe designers andscholars duetotheir mer-its of compact structure,high precision,highrepeatabili-ty,high stiffness and large load-volume ratio,etc.Re-search on parallel manipulators has been a hot issue fortheir applications in bioengineering[1],precision engi-neering[2],precisionsenor systems[3,4],mechanical man-ufacturing[5,6]and so on.Infact,it is very difficult for these parallel manipu-lator systemsto attainfurth…     

连续碳纤维增强复合材料3D打印喷头设计

为了解决3D打印喷头在成形过程中需要频繁抬起和跳转的问题,研制一种具有复合丝材可控导入、高效熔融挤出及实时剪切功能的新型3D打印喷头。首先,基于结构原理和功能分析方法,对喷头进行分模块化设计;然后,对喷头剪切装置控制系统及其控制流程进行设计和分析;最后,采用所研制的3D打印喷头实物进行连续碳纤维增强复合材料预浸丝的熔融挤出及剪切试验。结果表明,采用所设计的喷头结构以及程序控制方法,可以实现剪丝刀片在喷嘴末端对于复合材料的有效剪切,剪切断口平整,验证了所研制的新型复合材料3D打印喷头的可靠性和实用性。所提方法可有效避免喷头在抬起和跳转运动过程中引发的问题,为连续碳纤维增强复合材料3D打印喷头的结构设计及其运动控制提供了参考。     

混合稀土掺杂对非枝晶合金电化学性能的影响

本文研究了对非枝晶结构拉弗斯相阴极贮氢合金的混合稀土掺杂，以期进一步改进合金的动力学性能ＸＲＤ、ＥＰＭＡ及金相分析表明，混合稀土在合金中形成分散的Ｍｍ－Ｎｉ微小合金颗粒，在强碱性电解质的作用下，合金表面偏析出的疏松的混合稀土氢氧化物Ｍｍ（ＯＨ）。有利于镍原子簇对氢电极反应的催化作用