实现汽车发动机可变气门相位的新方法

介绍一种用于双顶置凸轮轴式发动机的采用两级谐波传动的新型进气凸轮轴调相机构。它由输入刚轮（正时带轮）、柔轮、输出刚轮（与进气凸轮轴联接）、固定波发生器、动波发生器和步进电机等组成。用步进电机驱动动波发生器可改变输出、输入刚轮的相对位置，从而改变进气相位。该机构能在很大角度范围内，以小步长实现多级调相，轴向尺寸小，转动惯量小，控制驱动功率小。２００ｈ试验表明，该机构工作可靠，能够准确地根据控制信号进行凸轮轴的调相。     

Pb-Sn-Bi三元系α相固溶体的点阵参数

应用X射线衍射法测定了Pb-Sn-Bi三元系Pb基α相固溶体的点阵参数,发现点阵间距与成分呈线性变化,对两批实验数据分别进行回归分析,得到点阵参数-浓度关系的统一解析式: α=0.49495X_(Pb)+0.47813X_(Sn)+0.50629X_(Bi)。其F检验置信度大于99.9％,残余标准差σ=6.4×10~(-5) nm,分析点阵畸变的影响因素表明尺寸效应是控制固溶体点阵行为的主要因素。     

山东栎林的基本特征(Ⅰ)

本文在调查了大量样方的基础上,分析了山东栎林的种类组成和地理成分,阐述了栎林的区系特征。     

Bochner－Kaehler流形的CR子流形

研究了Ｂｏｃｈｎｅｒ－Ｋａｅｈｌｅｒ流形的ＣＲ子流形得到了关于这类子流形的微分几何的一些重要结果。     

STABILITY CRITERIA FOR A CLASS OF UNCERTAINSYSTEMS WITH TIME—DELAY

Some stability criteria are obtained for a class of uncertain systems with time-delay usingLyapunov functional and analytic techniques. It is easy to check the criteria by making use of theboundedness of the uncertainties.     

Technical Notes ：STUDIES ON THE VALUE OF SECONDARY MARKET TO THE SUPPLY CHAIN

This paper investigates the impact of a secondary market, where retailers can buy and sell excessinventories, on the supply chain. We develop a two-period model with a single manufacturer and tworetailers. At the beginning of the first period the retailers order and receive products from themanufacturer, but at the beginning of the second period, they can trade surplus products betweenthemselves in the secondary market. We investigate the impact of the correlated dependence ofretailers' demand on both the quantity effect and the allocation effect under the secondary market.Lastly,we study potential strategies for the manufacturer to increase sales with the existence of thesecondary market.     

Dynamic Characteristics of Inter-Satellite Links in LEO Networks

To establish an efficient inter-satellite link (ISL) in an LEO network, the effect of geometric characteristics of ISL on the ISLs and the devices on the LEO satellite should be examined. Because of the continuous movement of the LEO satellite, the time-varying behaviours of the ISL's geometric charactersistics continuously change with the changes of the satellite's position on the orbit. These dynamic geometric characteristics of the ISLs are important for ISL's performance analyzing and the design of the devices on the LEO satellite. This paper describes dynamic geometric characteristics of ISL, analyzes the impact of these regulations on the tracking system of the satellite's antenna and the power adjusting system of the satellite's transmitter, with the Iridium system as an example.     

FROM MANUFACTURING SCHEDULING TO SUPPLY CHAIN COORDINATION：THE CONTROL OF COMPLEXITY AND UNCERTAINTY

With time-based competition and rapid technology advancements, effective manufacturingscheduling and supply chain coordination are critical to quickly respond to changing marketconditions. These problems, however, are difficult in view of inherent complexity and variousuncertainties involved. Based on a series of results by the authors, decomposition and coordination byusing Lagrangian relaxation is identified in this paper as an effective way to control complexity anduncertainty.A manufacturing scheduling problem is first formulated within the job shop context withuncertain order arrivals, processing times, due dates, and part priorities as a separable optimizationproblem. A solution methodology that combines Lagrangian relaxation, stochastic dynamicprogramming, and heuristics is developed. Method improvements to effectively solve large problemsare also highlighted. To extend manufacturing scheduling within a factory to coordinate autonomicmembers across chains of suppliers, a decentralized supply chai     

Radar Imaging Based on Iterative Algorithms

It has long been realized that the problem of radar imaging is a special case of image reconstruction in which the data are incomplete and noisy. In other fields, iterative reconstruction algorithms have been used successfully to improve the image quality. This paper studies the application of iterative algorithms in radar imaging. A discrete model is first derived, and the iterative algorithms are then adapted to radar imaging. Although such algorithms are usually time consuming, this paper shows that, if the algorithms are appropriately simplified, it is possible to realize them even in real time. The efficiency of iterative algorithms is shown through computer simulations.     

Finesse 全瓷冠适合性的体外实验研究

目的 :测量Finesse全瓷冠的边缘浮出量及粘固剂的厚度 ,并与金属全冠及金瓷全冠相比较 ,为Finesse全瓷冠的临床应用提供适合性方面的理论依据。方法 :用片切法测量 3组全冠粘固前、后边缘浮出量及粘固剂的厚度。结果 :Finesse全瓷冠粘固前、后的边缘浮出量分别为 (37 6 1± 9 13) μm、(6 5 85± 15 11) μm ,粘固剂厚度为 (40 84± 9 73) μm ,与金属全冠及金瓷全冠相比较 ,均无显著性差异 ;3组全冠粘固前和粘固后的边缘浮出量有显著性差异。结论 :Finesse全瓷冠适合性良好 ,完全可为临床应用 ;粘接对全冠修复体的边缘浮出量有影响。