Influence of minor boron on the microstructures of a second generation Nibased single crystal superalloy

Boron is added into single crystal superalloys as a micro-alloying element to strengthen low angle grain boundaries.However,systematic investigations on the effect of boron on microstructures of single crystal superalloys are limitedly reported.The effect of boron on as-cast and heat-treated microstructures was investigated in two experimental Ni-based single crystal superalloys containing 3 wt% Re.The current results indicated that the volume fraction of(γ+γ′)eutectic and M_3B_2 borides was evidently increased,while the number of micropores was evidently decreased with the addition of 0.02 wt% boron.The(γ+γ′)eutectic could not be dissolved completely due to the lower incipient melting temperature caused by the formation of M_3B_2 borides.Meanwhile,the M_3B_2 borides were found to be enriched with indispensable strengthening elements Cr,Mo,W and Re,and this may lower the strengthening effect and cause stress concentration during high temperature creep.     

Nanoengineering of amino - functionalized mesoporous silica nanospheres as nanoreactors

Selective functionalization of mesoporous silica nanospheres (MSNs) is crucial for nanoengineering of MSNs. Herein, we have combined “surface-protected etching strategy” and “cationic surfactant assisted etching strategy” to prepare functionalized MSNs with externally attached amino groups. The externally attached NH2 groups endow the catalysts with excellent catalytic performance for nitroaldol reaction between nitromethane and benzaldehyde. In addition, those NH2-MSNs can also be used to support gold nanoparticles, which display very good catalytic performance for reduction of 4-nitrophenol. It can be envisioned that the synthesis protocol developed in this work could also be extended to nanoengineered MSNs, which provides opportunities for nanoreactors design.     

Effect of cold rolling process on microstructure and mechanical properties of high strength β titanium alloy thin sheets

The microstructure and mechanical properties of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe high strength titanium alloy sheets prepared by unidirectional cold rolling and two-step cross cold rolling were investigated. Results showed that the β phase grains were refined significantly by cold rolling followed by solution treatment for a short time.Compared to unidirectional cold rolling, the short time solution treatment after two-step cross rolling could significantly reduce the non-uniformity of the microstructure of the alloy sheets. After aging treatment at 550 ℃,the anisotropy of the mechanical properties still existed in the unidirectional rolled sheets, and the tensile strength was highest along the rolling direction. After solution and aging treatment, the anisotropy of the mechanical properties of the two-step cross rolling process sheet was not obvious than unidirectional cold rolling,and alloy had good strength and plasticity matching.     

2015年秋季千里岩岛海域浮游植物群落结构特征

[目的] 为了了解千里岩岛附近海域浮游植物状况。[方法] 以2015年秋季在该海域的监测数据为基础,并结合2013年调查数据,分析该海域浮游植物的变化情况。[结果] 2015年秋季千里岩岛海域发现浮游植物37种,由硅藻和甲藻组成,平均密度为3.23×10⁵个/m³,监测区主要的优势种为圆筛藻(Coscinodiscus sp.)和虹彩圆筛藻(Coscinodiscus oculusiridis),多样性指数为2.13~3.42,平均为2.74。[结论] 与2013年调查数据比较,千里岩岛海域浮游植物种类数、密度和多样性指数有所增长,分析原因可能是由于调查季节不同。     

含位形权重的磁流变液孤立链流变剪应力模型

为降低采用标准孤立链理论模型计算高体积分数磁流变液流变剪应力时的计算误差,提出一种通过距离权重系数评价磁链间相互作用的流变模型.编写Monte Carlo仿真程序计算颗粒位置与磁矩方向矢量、同时输出与系统颗粒间距有关的距离权重系数.按标准和距离权重这两种链结构模型计算磁流变液剪切应力数值,并和4种磁流变液(30.58%~44.79%)的流变仪剪应力测试数据进行比较,结果显示,权重模型在磁场全范围内具有更高的计算精度,并且和流变试验实际结果基本符合,证实了磁链微观结构间的相互作用力是影响磁流变液流变特性的主要因素之一.     

制造商资金约束下的双渠道供应链协调

考虑由单一零售商和受资金约束的单一制造商组成的双渠道供应链,在引入带有价格折扣因子的零售商提前付款融资模式时,如何实现协调的问题.在制造商主导的Stackelberg博弈下,研究了制造商和零售商之间的库存协调问题,并建立了使得双渠道供应链实现协调的收入共享契约模型.给出了供应链协调时契约参数满足的表达式,并分析了价格折扣因子、初始资金对供应链及其成员的影响.最后,通过算例验证了契约对双渠道供应链协调的有效性及相关参数的作用.     

高温合金轴向超声振动钻削减摩机理

针对高温合金钻削困难、钻削过程中摩擦力大等问题,采用超声振动技术加工.首先,分析了超声振动减摩机理,构建了平均摩擦力与振动参数之间的关系,并得出了平均摩擦力与振幅之间的变化趋势.建立轴向超声振动钻削系统,利用该系统对高温合金进行钻削加工.结果表明:振动振幅对孔壁表面质量的影响符合超声振动钻削的减摩特性.利用优化后的振幅超声振动钻削,与普通钻削相比,切屑形态更加规整,孔壁表面粗糙度值更小,表面质量更好.     

膨胀蛭石用于人工湿地去除氮磷的研究

采用实验室模拟上向流人工湿地的方法研究了系统运行参数对膨胀蛭石去除氮、磷效果的影响.结果表明:膨胀蛭石的吸附作用在运行前期对氮、磷的去除起主要作用,在运行后期,氮、磷去除主要依靠微生物的作用;挂膜膨胀蛭石较未挂膜膨胀蛭石对氮、磷的去除率分别提高了9.8%,9.5%;膨胀蛭石人工湿地中TN,TP的进水质量浓度在0~100 mg/L,0~8 mg/L范围内时,其去除率随进水质量浓度的增大而增大,当进水质量浓度超过这个范围时,填料的吸附作用降低,生物膜的降解作用增强.膨胀蛭石是一种性能优异的人工湿地填料,对其进行人工挂膜可有效增强其去除氮、磷的能力.     

试论瑞典大学英语自主化教学模式及其对中国的启示

中国的大学英语教学一直在如何提高教学质量,赶上世界先进水平方面进行改革。瑞典等一些发达国家教育投资大,学习环境优越,与中国相比显示出明显的优越性。中国教育不仅要加大投入,还要改革、创新。     

一种快捷可靠的大肠杆菌重组质粒筛选方法

针对如何大规模地筛选大肠杆菌重组子,将质粒快检和菌落PCR两种方法巧妙地融合,建立一种新的高效快捷的重组质粒筛选方法.该方法不需接种抽取质粒,在转化子长出当天即可筛选到重组质粒.大规模基因克隆表明该方法能够快速、准确地筛选出阳性克隆.