基于小波分析对地面电场信号的去噪及闪电信息提取

基于小波分析方法,通过对7种小波函数在误差控制和阈值方法选取上的对比,参考信噪比及均方误差等计算结果,选取了较为合理的Rigrsure阈值分析方法和sym5小波函数作为地面大气电场信号的去噪处理方法.该方法不仅能够较好地对电场信号波形平滑处理,降低电场波形中噪声信号的叠加度,还可保留闪电引起的电场的快速变化.在此基础上,利用差分计算方法实现了对闪电信号的自动识别,引入了总闪电频数误差及分时段闪电频数与人工分析结果的相关系数等2个参考量来选取差分计算方法中电场差分阈值,通过该方法可以实现闪电频数和极性等有关信息的提取.     

Notch Effect and Frequency Compensation of Dual-Sensor OBC Data in Shallow Water

Reverberation is significant in shallow water and produces obvious notches in OBC spec-tra. It also degrades the quality of sections and increases the difficulty of processing and interpretation. This ...     

河南农业科技创新联盟建设与发展的思考

农业科技创新联盟是联盟发展的新产物,是农业科技创新进行协作的组织形式。本文主要通过对农业科技创新联盟及其重要作用和农业科技创新联盟功能定位、管理体制与存在问题进行了分析论述,提出了河南农业科技创新联盟建设发展的对策建议     

EVOKE: A Value-Driven Concept Selection Method for Early System Design

The development of new technologically advanced products requires the contribution from a range of skills and disciplines, which are often difficult to find within a single company or organization. Requirements establishment practices in Systems Engineering (SE), while ensuring coordination of activities and tasks across the supply network, fall short when it comes to facilitate knowledge sharing and negotiation during early system design. Empirical observations show that when system-level requirements are not available or not mature enough, engineers dealing with the development of long lead-time sub-systems tend to target local optima, rather than opening up the design space. This phenomenon causes design teams to generate solutions that do not embody the best possible configuration for the overall system. The aim of this paper is to show how methodologies for value-driven design may address this issue, facilitating early stage design iterations and the resolution of early stage design trade-offs. The paper describes how such methodologies may help gathering and dispatching relevant knowledge about the ‘design intent’ of a system to the cross-functional engineering teams, so to facilitate a more concurrent process for requirement elicitation in SE. The paper also describes EVOKE (Early Value Oriented design exploration with KnowledgE maturity), a concept selection method that allows benchmarking design options at sub-system level on the base of value-related information communicated by the system integrators. The use of EVOKE is exemplified in an industrial case study related to the design of an aero-engine component. EVOKE’s ability to raise awareness on the value contribution of early stage design concepts in the SE process has been further verified with industrial practitioners in ad-hoc design episodes.     

The expansion of GPCR transactivation-dependent signalling to include serine/threonine kinase receptors represents a new cell signalling frontier

G protein-coupled receptor (GPCR) signalling is mediated through transactivation-independent signalling pathways or the transactivation of protein tyrosine kinase receptors and the recently reported activation of the serine/threonine kinase receptors, most notably the transforming growth factor-β receptor family. Since the original observation of GPCR transactivation of protein tyrosine kinase receptors, there has been considerable work on the mechanism of transactivation and several pathways are prominent. These pathways include the “triple membrane bypass” pathway and the generation of reactive oxygen species. The recent recognition of GPCR transactivation of serine/threonine kinase receptors enormously broadens the GPCR signalling paradigm. It may be predicted that the transactivation of serine/threonine kinase receptors would have mechanistic similarities with transactivation of tyrosine kinase pathways; however, initial studies suggest that these two transactivation pathways are mechanistically distinct. Important questions are the relative importance of tyrosine and serine/threonine transactivation pathways, the contribution of transactivation to overall GPCR signalling, mechanisms of transactivation and the range of cell types in which this phenomenon occurs. The ultimate significance of transactivation-dependent signalling remains to be defined but it appears to be prominent and if so will represent a new cell signalling frontier.     

三维打印器件后处理液研究

分析了不同的填充强化剂(后处理A液)、不同的后处理B液基料、后处理B液中水性环氧乳液的掺量及后处理液浸泡时间对石膏基打印器件耐水性、抗压强度、尺寸偏差、表面微观结构的影响.结果表明:经纳米硅超硬固化剂处理后的打印器件抗压强度大幅提高,纳米硅超硬固化剂最适宜作为后处理A液;水性聚氨酯乳液PU-202B最适宜作为后处理B液的基料;后处理B液中加入水性环氧乳液,处理后打印器件的抗压强度增加、吸水率降低,但水性环氧乳液含量增加到一定程度后会出现尺寸偏差;后处理A、B液最佳浸泡时间分别为130 s和35 s;先浸泡后处理A液、后浸泡后处理B液的打印器件具有抗压强度高、吸水率小、表面较光滑、不脱粉等优良性能.     

Reconsideration on Homogeneous Quadratic Riemann Boundary Value Problem

The homogeneous quadratic Riemann boundary value problem (1) with Hoelder continuous coefficients for the normal case was considered by the author in 1997. But the solutions obtained there are incomplete. Here its general method of solution is obtained.     

Virtual Garment Sewing

Introduction3D garment CAD tools are increasingly required byclothing industries to assist the cloth design andmanufacturing process for quick response when faced withrapidly changing in style and fabrics with variable materialproperties. In the context of virtual prototyping, modelingand simulation of garment fitting to mannequin areattracting more and more people from both research andindustrial communities.Different approaches and techniques can be used…     

SDH技术在有线电视网络传输中的应用

文章介绍了SDH技术的传输原理、网络特点、基本构成及其在有线电视网络传输中的应用。     

碳钢在NaHCO3+NaCl溶液中的亚稳态孔蚀特征

用动电位极化和恒电位极化法研究了A3碳钢在不同浓度NaCl的0.5mol/LNaHCO₃溶液中亚稳态孔蚀行为。实验发现亚稳态电流波动峰具有快速上升、缓慢下降的特点。亚稳孔出现电位E_m 服从正态分布,随着Cl^-浓度的提高,E_m 值向负方向移动。亚稳孔的峰频变化规律与电位关系不大。恒电位极化时,当电位高于E_m而大大低于孔蚀电位E_b 时,电流波动保持一定时间后会最终消失,并产生直径为微米级的小蚀孔。当电位接近孔蚀电位时,一段时间的电流波动后电流往往迅速上升,最终转变为稳定蚀孔.