力学量算符本征函数的正交归一性

文中讨论了力学量算符本征函数的正交归一化性质,给出了得到正交归一化函数的方法。     

连续滚动生产作业安排中初始状态非平凡的P//C_(max)问题

以实际中连续滚动生产为背景,研究了一类新的平行机作业安排问题,即初始状态非平凡的Ｐ∥Ｃ_ｍａｘ问题。基于经典的Ｂｉｎ－ｐａｃｋｉｎｇ（装箱）理论和技巧,提出改进的Ｍｕｌｔｉｆｉｔ算法及相应的ＩＦＦＤ装法,并分析算法在最坏情况下的性能指标上界为４／３．最后,提出连续生产中周期滚动式作业安排的实施算法,实现了设备不空闲而连续运行。     

脂多糖—被动血凝试验早期诊断伤寒的价值

为评估脂多糖－被动血凝试验（ＬＰＳ－ＰＨＡ）早期诊断伤寒的应用价值,对病程不同的１０２例伤寒患者用ＬＰＳ－ＰＨＡ、肥达反应和细菌培养进行检测,２００例非伤寒发热患者作为对照。结果显示：伤寒患者病程第一周ＬＰＳ－ＰＨＡ阳性率为８０％（２４／３０）,第二周达９７７３％（４３／４４）;细菌培养阳性率２４５１％;肥达反应的伤寒与副伤寒鞭毛抗体交叉阳性率达３７２５％;对照组ＬＰＳ－ＰＨＡ有２％的假阳性。结果表明：ＬＰＳ－ＰＨＡ可早期、简便及快速诊断伤寒,有较高的敏感性和特异性。     

Genomic organization of EDSV strain AA-2

The genomic organization of egg drop syndrome virus strain AA-2 isolated in China is reported here. The genome was found to be 32 838 bp in length, approximately 2 kb shorter than those of the human subgenus C adenoviruses. Analysis of open reading frames indicated that the genes for major viral structural proteins (55 K, Penton base, pⅦ, pⅩ, pⅥ, Hexon, 100 K, pⅧ and Fiber), as well as EP, DNA polymerase and ⅣaⅡ are present in the expected locations in the genome. EDSV possesses no identifiable E3 and E4 regions and most proteins encoded by E3 and E4 regions of other adenoviruses genome were not presented in EDSV.     

Discovery of eclogite at northern margin of Qaidam Basin, NW China

Eclogite was first discovered at the northern margin of the Qaidam Basin in this study. It occurs as pods in the gneiss sequence of Middle to Upper Proterozoic age and is mainly composed of garnet, omphacite, phengite and rutile. The garnets contain 44%-62% of almandine, 15%-33% of grossular and 12%-30% of pyrope molecules, and the omphacites contain 40%-46% of jadeite. Applying garnet_clinopyroxene thermometry and jadeite geobarometry, the peak conditions of eclogite facies metamorphism occurred at about (722±123)℃ and at the pressure of up to c. 22 ×10 8 Pa.     

Determination of tectonic background for sedimentary basin from sandstone geochemistry

The chemical composition of sedimentary rocks is mainly controlled by source rocks. Through examining chemical composition of terrigenous rocks, the tectonic evolution of a sedimentary basin can be modeled. The Turpan Basin belongs to a continental sedimentary basin and its source rocks are derived from the upper continental crust.     

多晶3C-SiC薄层的淀积生长及结构性能分析

采用ＨＦＣＶＤ生长法,以较低生长温度,在Ｓｉ（１１１）衬底上淀积３Ｃ－ＳｉＣ（１１１）薄层。用ＸＲＤ、ＶＡＳＥ、ＸＰＳ等分析手段研究了薄层的结构、光学常数、组分及化学键等性能。ＸＲＤ显示薄层具有明显的择优取向特征。ＶＡＳＥ测量出薄层的折射率为２．６８６,光学常数随深度的变化曲线反映出薄层的多层结构。ＸＰＳ深度剖面曲线表明薄层中Ｓｉ／Ｃ原子比符合ＳｉＣ的理想化学计量比,其能谱证明Ｃ１ｓ与Ｓｉ２ｐ成键形成具有闪锌矿结构的３Ｃ－ＳｉＣ。     

盐酸米诺环素胶囊溶出度测定方法的改进

关于盐酸米诺环素胶囊溶出度测定方法和标准修订．采用紫外法,以水为溶剂,检测波长为（３４６±２）ｎｍ,在５～３０μｇ／ｍＬ浓度范围内有良好线性关系（ｒ＝０．９９９９）．平均回收率为（１００．６±０．５８）％,测定浓度为１５μｇ／ｍＬ．在此条件下可得准确的结果．     

活塞数控系统控制软件的设计

介绍了中凸变椭圆活塞数控车削系统的构成及特点、活塞加工原理、控制软件的设计等项内容。汽车发动机活塞的形状复杂,传统的靠模加工法柔性差,不能满足现在汽车类型多样化、产品更新换代快的要求。本文所介绍的数控系统很好地解决了这一问题,它采用多级ＣＰＵ的控制方法和多层次模块化的软件设计思想,很好地满足了活塞加工的要求,并且具有功能强大、界面友好、活塞设计数据的输入和修改方便、柔性好等特点。该系统现已通过了工厂７２ｈ考机,并形成了正式产品。     

线性系统参数估计的改进凸多面锥法

文章对现有的凸多面锥法进行了改进．改进方法采用旧凸多面锥的边的凸组合来求新多面锥的新边,从而提高了算法的稳定性．并且将凸多面锥算法扩展到输出误差模型的参数估计上．仿真算例验证了改进方法的有效性．