边界单元法三维应力分析计算程序

以三维弹性力学问题的基本解 (Kelvin解 )为基础开发了边界单元法三维弹性应力分析计算程序 ,并对其进行了验证。结果表明 ,该程序可用来求解三维弹性应力问题 ,尤其适用于三维应力集中问题。程序中采用动态分配内存 ,自动选点积分 ,并利用分块解法求解方程组 ,有效地节省了计算机资源 ,扩大了求解问题的规模。     

电弧喷涂铝及铝-锌涂层在动态腐蚀介质中的耐蚀性研究

对钢铁基体表面电弧喷涂铝及铝锌涂层进行了动态腐蚀实验 ,以失质量法计算了腐蚀速度 ,并探讨了腐蚀机理。采用SEM对铝及铝锌涂层腐蚀前后的外表形貌进行了观察 ,并对铝及铝锌涂层表面进行了能谱分析 ,采用电化学系统测试了涂层的自腐蚀电位。实验结果表明 ,在 3 %NaCl水溶液中铝涂层的耐蚀性优于铝锌涂层 ;其原因是铝涂层表面上氧化膜的自愈能力及自腐蚀电位高于铝锌涂层。研究还表明 ,铝及铝锌这些阳极涂层不仅能有效地保护它所覆盖的钢铁表面 ,还能保护暴露于腐蚀介质中的钢铁基体表面。在铝、铝锌涂层上刷涂有机涂料 ,有机涂料能渗透到金属涂层的孔隙中 ,将孔隙封闭。同时 ,有机涂层和金属涂层能构成复合涂层 ,其防腐效果更佳     

HV/CVD Grown Relaxed SiGe Buffer Layers for SiGe HMOSFETs

High-vacuum/chemical-vapor deposition (HV/CVD) system was used to grow relaxed SiGe buffer layers on Si substrates. Several methods were then used to analyze the quality of the SiGe films. X-ray diffraction and Raman spectroscopy showed that the upper layer was almost fully relaxed. Second ion mass spectroscopy showed that the Ge compositions were step-graded. Transmission electron microscopy showed that the misfit dislocations were restrained to the graded SiGe layers. Tests of the electrical properties of tensile-strained Si on relaxed SiGe buffer layers showed that their transconductances were higher than that of Si devices. These results verify the high quality of the relaxed SiGe buffer layer. The calculated critical layer thicknesses of the graded Si1-xGex layer on Si substrate and a Si layer on the relaxed SiGe buffer layer agree well with experimental results.     

Quantitative Analysis on Postponement Strategies of Decoupling Points in Mass Customization

The key to mass customizing effectively is postponingthe deco upling point of customer order in the supplynetwork. This paper focused on quantitative analysison postponement strategies of multiple decouplingpoints in mass customization to improve operating     

Emergent Property in Macromolecular Motion

In this paper, the model of inverse cascade fractal super-blocks along one direction (in the positive or negative) in the 3-dimensional space is developed to describe the self-similar motion in macromolecular system. Microscopically the cohesive and dispersed states of the motion blocks are co- existent states with vastly different probability of occurrence. Experimental results and theoretical analysis show that the microscopic cohesive state energy and dispersed state energy of each motion block are respectively equal to the macroscopic glassy state energy kTg and molten state energy kTm of the system. This singularity unveils topologically the non-integrability, mathematically the anholonomy, and macroscopically the emergent property. This singularity also reveals that the glass, viscoelastic and melt states are three distinct emergent properties of macromolecular motion from a macroscopic viewpoint. The fractal concept of excluded volume is introduced to depict the random motion at various scales in     

Computer Data Processing of the Hydrogen Peroxide Decomposition Reaction

Two methods of computer data processing, linear fitting and nonlinear fitting, are applied to compute the rate constant for hydrogen peroxide decomposition reaction. The results indicate that not only the new methods work with no necessity to measure the final oxygen volume, but also the fitting errors decrease evidently.     

Effect of Carboxymethyl Starch as Stabilizer for Increasing the Stability of Warp Sizing Pastes

The influences of carboxymethyl starch used as stabilizer upon the stability of native cornstarch-polyvinyl alcohol blend pastes for warp sizing have been investigated. The effect of the modified starch on the paste stability was evaluated in terms of the initial demixing time and the volume percentage of separated starch. The carboxymethyl starch with a series of different degrees of substitution was prepared in ethanol dispersion by varying the amount of monochloroacetic acid reacted with refined native cornstarch. The paste stability strongly depends on the modification extent and amount of carboxymethyl starch used, and on native starch content in the paste. Increase in the modification extent and/or the amount of the modified starch effectively retards the phase separation and reduces the separation extent of native cornstarch-polyvinyl alcohol blend pastes. Moreover, the mechanism and favorable modification extent of carboxymethyl starch for enhancing paste stability are also investigated and disc     

Ratio K: a New Way of Metering and Evaluating the Risk and Return of Stock Investment

Although widely used, both the Markowitz model and VAR (Value at Risk) model have some limitations in evaluating the risk and return of stock investment. By the analysis of the conceptions of risk and return, together with the three hypotheses of technological analysis, a novelty model of metering and evaluating the risk and return of stock investment is established. The major indicator of this model , risk-return ratio K, combines the characteristic indicators of risk and return. Regardless of the form of the risk-return probability density functions, this indicator K can always reflect the risk-return performances of the invested stocks clearly and accurately. How to use the model to make optimum investment and how to make portfolio combined with clustering analysis is also explained.     

Structural Changes of Polyethylene Terephthalate Fibers Grafted by Acrylamide

A group of grafted PET fibers with different graft yield are formed by grafting acrylamide onto the PET main chains. The structure of grafted fibers are studied by scanning electronic microscope ( SEM ), infra-red spectrophotometer ( IR ), and differential scanning calorimetry(DSC). At the same time, the moisture regain, dyeability, strength, and elongation at break of the samples are measured and their relations with structural changes are discussed. Compared with ungrafted fiber, shape of the fiber cross-section, IR characteristic absorption peaks, and melting behavior of the grafted fibers have been changed, causing the fiber dyeability and moisture regain to be increased, and mechanical properties to be changed.