Dynamical framework with blocking topography coordinates for atmospheric GCM and its validation

The dynamical framework with Blocking Topography Coordinates (hereafter, BTC), which is suited to handle the steep topography for the atmospheric general circulation models, is presented in this paper, together with its validation results. The integral properties of both the differential and finite-difference equations for the BTC dynamical core are: gross mass conservation, quadratic conservation for advection terms, Coriolis force does not change the kinetic energy, conservation of total available energy. The improved nonlinear iteration scheme is utilized for the time-integration. The energy conservation for BTC dynamical core is validated by using the integration results from 9-layer and 21-layer version respectively. Comparison results show that, the changes of the kinetic energy and total available potential energy during the integration are quite close for both the BTC dynamical framework and the dynamical framework of IAP 9-level and IAP 21-level AGCM, and this may suggest that the BTC dynamical core can be used for long-term integration with good computational stability. Furthermore, the BTC dynamical core has the advantage over the terrain following (sigma) coordinates in its better representation of the influence of the large-scale topography on the atmospheric general circulation. Finally, the correctness and reasonableness of the BTC dynamical core has been further proved by the numerical simulation of the topography influence on the quasi-stationary planetary wave with 21-layer version of BTC dynamical framework.     

Building of hFⅨ transgenic mice by spermatogenic cells

Human FⅨ expression vector pCMVⅨ was packaged by effectene^TM reagent and injected into mice seminiferous tubules with glass pipettes.The expressional frame of pCMVⅨ was examined by PCR and Southern blotting among 41 progenies.There were 2(4%) mice being integrated with hFⅨ gene into chromosomes.4.6ng/mL of hFⅨ protein was expressed in plasma of one mouse,which was tested by ELISA.We demonstrated that building of transgenic animals by spermatogonial stem cells is an efficient method.Meanwhile,it has also been proved to be an alternative choice for mammary gland bioreactor.     

干燥控制化学添加剂在制备硅气凝胶中的应用

以硅溶胶为主要原料,通过硅溶胶体系的凝胶过程中添加干燥控制化学添加剂(DCCA),并结合非超临界干燥技术制备了硅气凝胶,研究了DCCA对凝胶过程和最终所得气凝胶品质的影响。DCCA能使凝胶的生成时间增加,凝胶结构均匀化,构成凝胶的基本微粒的粒径有所减小。在一定的DCCA添加量范围内,随着DCCA添加量的增加,所得气凝胶样品的密度有所减小,比表面积增加,微观结构变得更加完善,孔分布也更加集中。不同DCCA对气凝胶品质的影响规律不尽相同,气凝胶的品质就有可能通过调节添加DCCA的种类和量得到控制。     

演绎数据库虚关系的内部表示

介绍了演绎数据库的系统结构，并着重介绍了基于SQL Serverr之上的递归查询算法和将以规则形式存放于外存的虚关系转化为内部表示的过程。     

MPEG-2传输流再复用器的设计

提出一套MPEG—2传输流再复用器的设计方案。该方案采用CAM RAM组合代替简单的RAM结构用于构造PID信息表，在保证速度的基础上，大大节约了资源；提出了“两步法”PCR校正算法，在保证节目时钟基准(PCR)校正精度的基础上，大大减小了硬件设计的复杂度；基于该再复用器，提出了MPEG—2传输流、纯数据、主控机插入等几种实用的数据插入方式，以适应不同的应用环境。     

微段渐开线齿轮接触强度与弯曲强度的分析

介绍了微段渐开线齿廓形成过程，从理论上分析了微段渐开线齿廓以凹凸方式啮合时其曲率半径相等及其接触应力嘶很小的原因．同时通过有限元法分析了微段渐开线的弯曲强度，并与相同情形下的渐开线齿轮进行了比较，指出了微段渐开线齿廓的弯曲强度优于渐开线齿廓的原因．     

四乙基铵碳酸氢盐水主客体加合物的晶体结构研究

合成了(C2H5)4N+HCO-3*H2O加合物并用X射线单晶衍射解析了其晶体结构.晶体属单斜晶系, P21/n空间群, a=0.8186(1) nm, b=1.5330(3) nm, c=0.9562(3)nm, β=97.82(2)°, Z=4, V=1.1888(5) nm3, Mr=209.28, ρc=1.169g*cm-3, μ(MοKα)=0.090mm-1, F(000)=464,对1837个独立衍射点的最终偏离因子R=0.0486.每个不对称单位由1个碳酸氢根离子、1个水分子与1个四乙基铵阳离子组成.阴离子和水分子之间通过氢键连成皱折纽带,被包含在四乙基铵阳离子列所形成的未完全封闭管道中.     

玻璃陶瓷基板上铜薄膜的化学气相沉积

使用低介电常数基板和高电导率、高抗电迁移的金属Cu进行布线,可以提高高密度电子封装的传输速度和可靠性。采用乙酰丙酮铜作为前驱体,在常压下利用化学气相沉积技术对玻璃陶瓷基板进行Cu薄膜金属化。利用热重分析、X射线衍射和扫描电子显微镜等技术对前驱体、Cu薄膜进行分析观察。结果表明:影响Cu导体的电阻的主要因素是沉积温度。在温度为290～310℃,N2气流量为200～350mL/min和H2气流量为450～600mL/min的条件下,获得了致密的Cu薄膜,Cu导体方块电阻为25mΩ。     

涡轮桨搅拌槽内流场的数字PIV测量

为研究机械搅拌槽内的流场特性,用数字粒子图像测速仪对桨叶直径与搅拌槽直径比约为0.5的涡轮桨搅拌槽内流场进行了测量。实验发现测量值随时间的随机脉动非常剧烈,为准确获取时均速度场,确立了多采样点平均的实验方法并进而找出了最佳采样点数。在获取的时均速度场的基础上计算了流量准数、涡量和湍动能的分布,考察了转速和测量面位置对流场的影响。结果表明:湍动能分布不均匀,在叶轮区较高,而在主体区较小;由于自由液面的作用,湍动能在高度方向上呈非对称性分布,并且这种非对称性随转速的变化而变化。     

混流式转轮静强度和振动特性分析

为大型水轮机组的安全、稳定运行,研究了转轮在水介质中的动力特性。运用顺序耦合的方法,分析了在三维旋转流动所产生的水压力作用下转轮体的静强度特性;运用全流固耦合的三维有限元方法进行了转轮在水介质中的模态分析。强度分析结果表明,应力集中的部位与裂纹实际产生的位置完全吻合,但最大等效应力远小于材料的极限破坏应力;模态分析得到转轮在水中的自振频率和振型等振动特性,指出了发生共振的可能性。结果证实了导致裂纹产生的原因不是静应力而是动载荷的作用。