High-performance flexural fatigue of carbon nanotube yarns

Carbon nanotube yarns （CNTY） possess good specific strength and specific conductivity. As such, their potential for commercial applications is significant. Fatigue performance is a significant consideration in yarn/wire applications. In this study, the flexural fatigue performance of CNTY spun from super-aligned carbon nanotube arrays was investigated using a reversed bending test. The results showed that CNTY exhibited excellent resistance to pure flexural fatigue, significantly outperforming stainless steel wire; CNTY failed where a combination of flexural fatigue and tension-tension fatigue had special hollow fracture morphology, and CNTY resistance remained fundamentally unchanged in the combination fatigue process.     

Research on intelligent ultrasonic thickness measurement system applied to large area of hull

For a ship in service,seawater corrosion is unavoidable.In order to ensure navigation safety and master the steel plate thickness in service ship,thickness of the ship steel plate must be tested periodically by a scientific method.After consideration of an actual situation of thickness measurement,the bearing mechanism of ultrasonic thickness meter probe has been designed on the basis of wall-climbing robot,and preliminary experiments have been carried out.The device is mainly used for thickness measurement of a large area of ship hull plate when the docking ship has been sandblasted.Efficiency and safety can be improved to finish thickness measurement by using the device.     

Effects of Cr and Mo elements on the microstructures and compressive properties of the in situ (TiC_xN_y–TiB_2)/Ni cermets

In-situ(TiC_xN_y–TiB_2)/Ni cermets with 70 wt%TiC_xN_y–TiB_2 were successfully fabricated by combustion synthesis and hot pressing sintering in Ni-Ti-B_4C-BN powder systems.The microstructures,density,compressive properties,and hardness of the TiC_xN_y–TiB_2/Ni cermets with the addition of 0–8 wt%Cr/Mo to the Ni-Ti-B_4C-BN powder systems were compared and analysed.The results showed that the ceramic particles distributed uniformly in the cermets,and the size of the ceramic particles reduced with the Cr/Mo addition.Both Cr and Mo addition can improve the hardness,compressive properties,and fracture strains of the cermets.The hardness,compressive strength,and fracture strain of the(TiC_xN_y–TiB_2)/(Ni+Cr)cermets increased from 1561 HV,2.94 GPa,and 2.9%to 1864 HV,3.65 GPa,and 3.4%,respectively when the Cr content increased to 5 wt%.The hardness and compressive strength of the(TiC_xN_y–TiB_2)/(Ni+Mo)cermets increased from 1561 HV and 2.94 GPa to 1902 HV and 3.43 GPa,respectively when the Mo content increased to 8 wt%.The cermets with Cr had better compressive properties than the cermets with Mo.     

仿真技术在足球整体进攻训练中的应用

仿真技术优势明显,在足球运动应用领域有着广阔前景。目前足球进攻训练大多以直观、经验和现场实践为主,缺少专业化的情景再现和系统化的理论支持。利用VisualC++开发平台和计算机模拟仿真编程设计方法将足球训练虚拟化,再现不同比赛训练场景下足球整体进攻演练。结果显示仿真技术实现的训练情境远多于实际,可作为足球整体进攻训练的辅助工具,丰富足球整体进攻的训练手段,帮助球员准确理解战术体系,推动足球训练的科学化发展。     

In situ backscattered electron imaging study of the effect of annealing on the deformation behaviors of Ni electroformed from additive-free and saccharin-containing sulfamate solutions

The Ni samples were electroformed from additive-free(AF) and saccharin-containing(SC) sulfamate solutions, respectively. In situ backscattered electron(BSE) imaging, electron backscatter diffraction(EBSD), and electron-probe microanalysis(EPMA) were used to investigate the effect of annealing on the deformation behaviors of the AF and SC samples. The results indicate that columnar grains of the as-deposited AF sample had an approximated average width of 3 μm and an approximated aspect ratio of 8. The average width of columnar grains of the as-deposited SC sample was reduced to approximately 400 nm by the addition of saccharin to the electrolyte. A few very-large grains distributed in the matrix of the SC sample after annealing. No direct evidence indicated that S segregated at the grain boundaries before or after annealing. The average value of the total elongations of the SC samples decreased from 16% to 6% after annealing, whereas that of the AF samples increased from 18% to 50%. The dislocation recovery in grain-boundary areas of the annealed AF sample was reduced, which contributed to the appearance of microvoids at the triple junctions. The incompatibility deformation between very-large grains and fine grains contributed to the brittle fracture behavior of the annealed SC Ni.     

An improved LP model for energy optimization of the integrated iron and steel plant with a cogeneration system in China

In an integrated iron and steel plant with a cogeneration system, recycled energy is continuously transported into the cogeneration system and the electricity is continuously generated, and both of them could not be stored for a long time. Moreover, the generation and consumption of electricity is irregular, which may bring about more unexpected imbalances. Therefore, it is a crucial issue to schedule the entire energy system by optimizing the operation of energy utilization, which includes the raw energy in the production system, the generation electricity in the cogeneration system and the recycled energy in these two systems. In this paper, an improved Linear Programming model for energy optimization in the integrated iron and steel plant with a cogeneration system is established. The improved model focuses on controlling the whole energy flow and scheduling the whole energy consumption in the entire energy system between the production system and cogeneration system through optimizing all kinds of energy distribution and utilization in an integrated iron and steel plant with a cogeneration system. Case study shows that the improved model offers the optimal operation conditions at the higher energy utilization, lower energy cost and lower pollution emissions.     

Ion flux dropout observed near dipolarization front

An ion flux dropout near the dipolarization front （DF） at around XGSM =- 11 RE in the Earth＇ s plasma sheet was observed by Time History of Events and Macroscale Interaction during substorms （THEMIS） on March 31, 2009. The ion differential energy fluxes at energies from 450 eV to 150 keV measured by the ESA and SST instruments from THC began to decrease about 2 s before the detection of the DF and reached a local minimum 6 s later. Then, the ion fluxes gradually increased to form a dropout around the DF. The spatial extent of the dropout was about 4,000 km. For energies above 20 keV, the ion fluxes after the dropout are greater than those before it, contrary to the fluxes at energies below 20 keV. The associated ion density variation indicates that the ion flux dropout coincides with the ion density dropout. Taking advantage of multipoint observations, THD, THC, and THE detected the same DF consecutively. Only THC detected an obvious ion flux dropout; THD observed an indistinct one about 2 s before THC; no high-energy （E 〉 30 keV） ion flux dropout was observed by THE. Our study suggests that the ion flux dropout may evolve with the earthward-propagating DF, and its properties can depend on locations relative to the DF.