Leaching behavior of V,Pb, Cd,Cr, and As from stone coal waste rock with different particle sizes

This paper investigates the leaching behavior of heavy metals (V, Pb, Cd, Cr, and As) from stone coal waste rocks with various particle sizes using dynamic leaching experiments. The results show that the dissolved concentrations of V and As initially increased and then slightly decreased as time progressed and that the dissolved concentrations of Pb, Cd, and Cr were high in the early stage before decreasing. The particle size of the stone coal waste rocks strongly influenced the heavy metal concentration in the leaching solutions. The effects of the particle size of the stone coal waste rocks on the dissolved concentrations of V, Pb, and As decreased in the order fine fraction > medium fraction > coarse fraction, and the effects of particle size on the dissolved concentrations of Cr and Cd decreased in the order medium fraction > coarse fraction > fine fraction and coarse fraction > medium fraction > fine fraction, respectively. The quantities of heavy metals dissolved from the stone coal waste rock with fine particle sizes were observed to decrease in the order V (17104.36 μg/kg) > As (609.41 μg/kg) > Pb (469.24 μg/kg) > Cr (56.35 μg/kg) > Cd (27.52 μg/kg), and the dissolution rates decreased in the order As (2.96%) > Pb (0.93%) > V (0.35%) > Cd (0.25%) > Cr (0.01%). The specific surface area, pore size of the stone coal waste rocks, and chemical forms of heavy metals also influenced the release of heavy metals from the stone coal waste rocks. Kinetic analysis showed that the dissolution of heavy metals fundamentally agreed with the rate equation controlled by the shrinking core model. The results of this study are expected to serve as a reference for the evaluation of heavy metals contamination from stone coal waste rocks.     

Microstructural characterization and oxidation resistance of multicomponent equiatomic CoCrCuFeNi-TiO high-entropy alloy

CoCrCuFeNi-TiO was prepared by arc melting of the pure elements and Ti₂CO powder under an Ar atmosphere. Both CoCrCuFeNi and CoCrCuFeNi-TiO alloys are composed of a face-centered cubic (fcc) solid solution, whereas the alloys of CoCrCuFeNi-TiO are basically composed of an fcc solid solution and TiO crystals. The microstructures of CoCrCuFeNi-TiO are identified as dendrite and interdendrite structures such as CoCrCuFeNi. The morphology of TiO is identified as an equiaxed crystal with a small amount of added Ti₂CO. By increasing the amount of Ti₂CO added, the TiO content was dramatically increased and part of the equiaxed crystals changed to a dendrite structure. A test of the oxidation resistance demonstrates that the oxidation resistance of CoCrCuFeNi-TiO is better than that of CoCrCuFeNi. However, as the TiO content increases further, a corresponding decrease is observed in the oxidation resistance.     

Effect of melting temperature on microstructural evolutions,behavior and corrosion morphology of Hadfield austenitic manganese steel in the casting process

In this study, the effect of melting temperature on the microstructural evolutions, behavior, and corrosion morphology of Hadfield steel in the casting process is investigated. The mold was prepared by the sodium silicate/CO₂ method, using a blind riser, and then the desired molten steel was obtained using a coreless induction furnace. The casting was performed at melting temperatures of 1350, 1400, 1450, and 1500℃, and the cast blocks were immediately quenched in water. Optical microscopy was used to analyze the microstructure, and scanning electron microscopy (SEM) and X-ray diffractrometry (XRD) were used to analyze the corrosion morphology and phase formation in the microstructure, respectively. The corrosion behavior of the samples was analyzed using a potentiodynamic polarization test and electrochemical impedance spectroscopy (EIS) in 3.5wt% NaCl. The optical microscopy observations and XRD patterns show that the increase in melting temperature led to a decrease of carbides and an increase in the austenite grain size in the Hadfield steel microstructure. The corrosion tests results show that with increasing melting temperature in the casting process, Hadfield steel shows a higher corrosion resistance. The SEM images of the corrosion morphologies show that the reduction of melting temperature in the Hadfield steel casting process induced micro-galvanic corrosion conditions.     

Mineral-phase evolution and sintering behavior of MO-SiO2-Al2O3-B2O3 (M=Ca,Ba) glass-ceramics by low-temperature liquid-phase sintering

In this work, network former SiO₂ and network intermediate Al₂O₃ were introduced into typical low-melting binary compositions CaO·B₂O₃, CaO·2B₂O₃, and BaO·B₂O₃ via an aqueous solid-state suspension milling route. Accordingly, multiple-phase aluminosilicate glass-ceramics were directly obtained via liquid-phase sintering at temperatures below 950℃. On the basis of liquid-phase sintering theory, mineral-phase evolutions and glass-phase formations were systematically investigated in a wide MO-SiO₂-Al₂O₃-B₂O₃ (M=Ca, Ba) composition range. The results indicate that major mineral phases of the aluminosilicate glass-ceramics are Al₂₀B₄O₃₆, CaAl₂Si₂O₈, and BaAl₂Si₂O₈ and that the glass-ceramic materials are characterized by dense microstructures and excellent dielectric properties.     

综合传动装置悬置系统刚度灵敏度分析与振动能量解耦

基于综合传动装置悬置系统6自由度耦合振动模型,利用灵敏度分析方法,计算悬置系统各阶固有振动频率关于各悬置各方向刚度的灵敏度,确定影响某一方向振动的关键橡胶刚度,为改善系统某一方向的振动提供理论依据.以系统各方向振动解耦率作为目标函数,综合考虑传动轴激励、人体承受振动敏感区域及各向振动耦合状况来确定优化约束条件,进行刚度参数最优化,得到的悬置系统各方向最优刚度值可用于改善悬置系统隔振性能.针对某一传动系统振动恶化的情况,采用刚度灵敏度分析与振动能量解耦综合方法,对悬置系统进行设计.最后利用台架振动试验结果验证悬置系统优化设计的有效性.      

Improved dehydriding property of polyvinylpyrrolidone coated Mg-Ni hydrogen storage nano-composite prepared by hydriding combustion synthesis and wet mechanical milling

In this work, polyvinylpyrrolidone(PVP) coated Mg_(95)Ni_5 nano-composites were prepared by hydriding combustion synthesis(HCS) plus wet mechanical milling(WM) with tetrahydrofuran(THF) and donated as WM-x wt% PVP(x = 1, 3, 5 and 7) respectively. The phase compositions, microstructures and dehydriding property, as well as the co-effect of PVP and THF were investigated in detail. XRD results showed that the average crystal size of MgH_2 in the milled Mg_(95)Ni_5 decreased from 23 nm without PVP to 18 nm with 1 wt% PVP. The peak temperature of dehydrogenation of MgH_2 in the milled Mg_(95)Ni_5 decreased from 293.0 ℃ without THF to 250.4 ℃ with THF. The apparent activation energy for decomposition of MgH_2 in WM-7 wt% PVP was estimated to be 66.94 kJ/mol, which is 37.70 kJ/mol lower than that of milled Mg_(95)Ni_5 without THF and PVP. PVP and THF can facilitate the refinement of particle size during mechanical milling process. Attributed to small particle sizes and synergistic effect of PVP and THF, the composites exhibit markedly improved dehydriding properties.     

Effect of minor Sc on the microstructure and mechanical properties of AZ91 Magnesium Alloy

The as-cast and heat-treated microstructures and mechanical properties of the AZ91 magnesium alloys with and without minor Sc addition were investigated and compared in this paper. The results indicated that adding0.15–0.45 wt% Sc to the as-cast AZ91 alloy not only could modify and refine the Mg_(17)Al_(12) phase but also suppress the formation of the Mg_(17)Al_(12) phase. At the same time, the grains of the Sc-containing as-cast AZ91 alloys were also effectively refined. As a result, the mechanical properties at room temperature(RT) for the Sccontaining as-cast AZ91 alloys were effectively improved. In addition, adding 0.15–0.45 wt%Sc to the AZ91 alloy promoted the formation of the continuous precipitates(CP) during the aging treatment in spite of that the formation of the discontinuous precipitates(DP) was simultaneously suppressed. Accordingly, the Sc-containing as-aged AZ91 alloys obtained the relatively higher mechanical properties at RT than the as-aged AZ91 alloy.     

钢渣吸附去除水中亚甲基蓝

通过静态批式实验研究钢渣对亚甲基蓝吸附行为的影响.结果表明:亚甲基蓝去除率随钢渣投加量的增加而增大,随初始浓度的升高而降低,而单位钢渣质量下亚甲基蓝的吸附量呈相反趋势.溶液初始pH值为4时最有利于钢渣吸附亚甲基蓝.钢渣吸附亚甲基蓝符合Lagergren准一级动力学方程,平衡吸附量随亚甲基蓝初始质量浓度的增加而增大,随钢渣投加量增加而减小.结合Freundlich等温吸附方程发现,钢渣对亚甲基蓝的吸附是以离子交换作用为主的优惠型吸附.亚甲基蓝阳离子在静电力作用下吸附在钢渣表面,并与CaO等反应形成聚合物,增强吸附效能.     

基于脉搏波数学模型的运动员运动状态判别方法

针对利用运动员脉搏波信息对其运动状态(高强度运动、平静)进行判别,并减少身体状态的随机性对脉搏波特征信息的影响问题,提出了一种对原始脉搏波信号进行建模进而提取特征信息进行状态判别的方法.利用训练-测试的二分类分析方式,对运动员的心率状态进行判别,以分析运动员的运动状态,辅助其进行运动训练工作.实验通过对10名运动员志愿者在不同状态下进行脉搏波采集,对预处理后的原始信号进行函数建模并提取生理信息,利用SVM进行监督训练和测试.结果表明,该方法能够对运动员心率状态进行有效判别,得到运动员的运动状态.     

基于专利分析的中国海洋生物肥料发展现状与发展建议

【目的】为了解国内海洋生物肥料的知识产权现状,明确海洋生物肥料的研究热点及其发展趋势。【方法】对国内有关海洋生物肥料的公开专利进行检索分析,主要从年度专利申请量、区域分布、技术领域、申请机构类型和词频分析进行数据整理。【结果】海洋生物肥料专利申请数量增长迅速,其中山东省在海洋生物资源农业应用领域领先全国,广西位于全国前列。企业在专利申请数量上远高于科研院所和高校。62%专利涉及的相关工艺为海洋原材料简单物化处理技术,其他的则为采用微生物发酵或酶解技术。专利词频分析表明,海藻是海洋生物肥料领域使用最普遍的原材料。【结论】海洋生物肥料市场潜力巨大,但其在应用上仍处于原材料收集利用的初级阶段,深入挖掘利用海洋微生物资源能够促进生物肥料产业的升级换代。广西拥有丰富的海洋生物资源,也有微生物工业应用的经验和基础,研发人员应在原有海洋生物利用的基础上,充分利用海洋微生物资源提升产品功效,促进广西农业绿色发展。