Effect of cold rolling process on microstructure and mechanical properties of high strength β titanium alloy thin sheets

The microstructure and mechanical properties of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe high strength titanium alloy sheets prepared by unidirectional cold rolling and two-step cross cold rolling were investigated. Results showed that the β phase grains were refined significantly by cold rolling followed by solution treatment for a short time.Compared to unidirectional cold rolling, the short time solution treatment after two-step cross rolling could significantly reduce the non-uniformity of the microstructure of the alloy sheets. After aging treatment at 550 ℃,the anisotropy of the mechanical properties still existed in the unidirectional rolled sheets, and the tensile strength was highest along the rolling direction. After solution and aging treatment, the anisotropy of the mechanical properties of the two-step cross rolling process sheet was not obvious than unidirectional cold rolling,and alloy had good strength and plasticity matching.     

Structures of magnetic null points in reconnection diffusion region: Cluster observations

Magnetic reconnection is a very important and fundamental plasma process in transferring energy from magnetic field into plasma. Previous theory, numerical simulations and observations mostly concentrate on 2-dimensional （2D） model; however, magnetic reconnection is a 3-dimensional （3D） nonlinear process in nature. The properties of reconnection in 3D and its associated singular structure have not been resolved completely. Here we investigate the structures and charactedstics of null points inside the reconnection diffusion region by introducing the discretized Poincar6 index through Gauss integral and using magnetic field data with high resolution from the four satellites of Cluster mission. We estimate the velocity and trajectory of null points by calculating its position in different times, and compare and discuss the observations with different reconnection models with null points based on characteristics of electric current around null points.     

Operationalising “Double-Loop” Learning in Service Organisations: A Systems Approach for Creating Knowledge

Learning organisation literature has widely discussed the connections between “double-loop” learning and its significance to organisational performance, but paying little attention to tools and systems that can operationalise “double-loop” learning in organisations. This paper investigates the impact of applying a systems approach for service operations design, expressed as the Vanguard Method (Seddon, Freedom from command and control: a better way to make the work work, 2003), in order to activate “double-loop” learning in service organisations. Two case studies were conducted in the banking mortgage operations and adults’ social care services in the UK, using the dimensions of the learning organisation questionnaire (DLOQ), semi-structured interviews, observations, and documents. The findings of the cross-case analysis support the link of applying the Vanguard Method with operationalising “double-loop” learning through three main factors, namely systematic-operations improvement, organisational capacity development, and outside-in mode of work; that are all embedded into the seven dimensions of the DLOQ. The value of this paper is the introduction of a service operations design tool that can activate “double-loop” learning performance in the fast changing knowledge era. It also provides an impetus for service organisations to creatively influence employees’ competencies to effectively improve internal systems.     

Improved hybrid position/force controller design of a flexible robot manipulator using a sliding observer

An improved hybrid position/force controller design of a flexible robot manipulator is presented using a sliding observer. The friction between the end effector and the environment is considered and compensated. For systematic reasons the controller is designed taking into consideration the rigid link subsystems and the flexible joints. The proposed control system satisfies the stability of the two subsystems and copes with the uncertainty of robot dynamics. A sliding observer is designed to estimate the time derivative of the torque applied as input to the rigid part of the robot. For the stability of the observer, it is assumed that the uncertainty of the observed system is bounded. A MRAC algorithm is used for the estimation of the friction forces at the contact point between the end effector and the environment. Finally simulation and experimental results are given, to demonstrate the effectiveness of the proposed controller.     

Performance analysis of optimal channel estimation and multiuser detection in a randomly-spread CDMA channel

<正> This paper analyzes performance of optimal channel estimation and multiuser detection(MUD) in a block-fading code-division multiple-access (CDMA) channel on the assumptions of randomspreading and large-system limit,by using the replica method developed in statistical mechanics.The authors find that the asymptotic spectral efficiency of the linear minimum mean-squared error(LMMSE) MUD which was proposed and analyzed by Evans and Tse in 2000 is indistinguishable fromthat of the optimal MUD for small system loads.Our results imply that performance of MUD scarcelyimproves even if one spends more computational cost than that of the LMMSE MUD,i.e.,at most thecube of the number of users,on the above-described conditions.     

Stability and change in fertility intentions in Britain, 1991-2007

The very low fertility experienced in several European countries in recent decades in the presence of higher intended family sizes has renewed interest in fertility intentions data. While the overall level of childbearing in Britain over the past few decades has remained relatively stable and high in comparison with many other European countries, we have seen sizeable increases in the age at which childbearing starts. This study uses data from the 1991 to 2007 General Household Surveys to examine trends in family intentions data in an attempt to arrive at a better understanding of these recent fertility developments. First, time trends in intended family size are compared with trends in observed fertility. Next, aggregate changes in intentions regarding the level and timing of fertility across the life course for cohorts are investigated together with the extent to which these aggregate intentions are matched by the subsequent childbearing of cohorts. Finally, both change across the life course and uncertainty in family intentions are examined. We conclude by discussing what these findings might tell us about contemporary reproductive decision making.     

Induced and heavy aggregation operators with distance measures

This paper introduces a new aggregation model by using induced and heavy aggregation operators in distances measures such as the Hamming distance. It is called the induced heavy ordered weighted averaging (OWA) distance (IHOWAD) operator. This paper studies some of its main properties and a wide range of particular cases such as the induced heavy OWA (IHOWA) operator, the induced OWA distance (IOWAD) operator and the heavy OWA distance (HOWAD) operator. This approach is generalized by using generalized and quasi-arithmetic means obtaining the induced generalized IHOWAD (IGHOWAD) operator and the Quasi-IHOWAD operator. An application of the new approach in a decision making problem regarding the selection of strategies is developed.     

美国东北部早熟和晚熟玉米杂交种年际间产量稳定性

玉米是美国东北部奶牛业的主要能量来源，杂交种的选择是提高玉米产量、降低生产成本的关键和前提。连续5年在美国麻省大学农学实验站的典型砂壤土耕地上进行试验，结合当地气象部门提供的生育期间玉米的生长期生长度日数和降雨量，对3个早熟杂交种和3个晚熟杂交种的产量进行了年际间稳定性比较。结果表明：产量与年际间气候条件无关，无论是青贮饲料产量还是穗棒产量，晚熟品种的产量均高于早熟品种（2001年杂交种E409L）。5年平均晚熟品种的青贮饲料产量和穗棒产量分别比早熟品种高出10．9％和8．0％。相同年份品种间产量存在差异，同一品种年际间产量差异显著。低温年份，相对冷凉的生育前期和温热的生育后期不利于美国东北部玉米生产。生育期间较高的降雨量有利于青贮产量的形成。选择种植晚熟品种是该区农民提高玉米产量、降低生产成本的有效途径。只有热量多且雨量充沛的年份才有利于玉米产量潜力的挖掘。有关某种玉米基因型对当地气候适应性方面的知识，将有利于育种者选择有价值的种质资源。表6，参17。