基于线性多用户检测的DS-UWB接收机研究

研究了MMSE线性多用户检测接收机在单用户DS-UWB系统中的应用,推导了接收机的信号模型以及滤波器权向量的计算公式,分析了其性能．仿真实验表明,在IEEE802．15．3a信道中,线性多用户检测接收机比选择Rake接收机（S-Rake）具有更好的能量收集和多径干扰抑制能力．     

Lasing on pyroclastic rocks: A case study of <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar dating on Moshishan Group,eastern Zhejiang Province

It is difficult to date pyroclastic rocks, for almost all the dating methods, due to the multiple sources during their formation. ^40Ar/^39gAr incremental heating results on groundmass selected from the samples show that the age spectra are meaningless geologically. However, singe crystal total fusions of CO2 lasing on the sanidine separates could yield rational 4^40Ar/^39Ar results and distinguish their sources in this study. Timing on three formations of the Moshishan Group, after avoiding the exotic and altered grains by lasing on the single sanidine separate, was reported in this paper. The lowermost portion of the Chawan Formation gives an age of 113.7±0.3 Ma; the lower part of the Xishantou Formation was formed 116.4±0.4 Ma ago and the bottom of the Gaowu Formation took its shape at 118.4±0.4 Ma. These new ages are much younger than the previous ones, suggesting that these thick volcanic formations had been formed in very short durations.     

Formal analysis on an extended security model for database systems

In order to develop highly secure database systems to meet the requirements for class B2, the BLP （Bell-LaPudula） model is extended according to the features of database systems. A method for verifying security model for database systems is pro- posed. According to this method, an analysis by using Coq proof assistant to ensure the correctness and security of the extended model is introduced. Our formal security model has been verified secure. This work demonstrates that our verification method is effective and sufficient.     

An Improved Identity-Based Society Oriented Signature Scheme with Anonymous Signers

In this paper, we present an improved identity-based society oriented signature scheme with anonymous signers, which satisfies： （1） when members leave or join an organization, the public verification key and the signature verification procedure are unchanged; （2） a user participates in several organizations at the same time, her secret key is only related with her identity. However, no previous schemes have these two properties.     

Mechanism of brittle-ductile transition of a glass-ceramic rigid substrate

The hardness, elastic modulus, and scratch resistance of a glass-ceramic rigid substrate were measured by nanoindentation and nanoscratch, and the fracture toughness was measured by indentation using a Vickers indenter. The results show that the hardness and elastic modulus at a peak indentation depth of 200 nm are 9.04 and 94.70 GPa, respectively. These values reflect the properties of the glass-ceramic rigid substrate. The fracture toughness value of the glass-ceramic rigid substrate is 2.63 MPa·m1/2. The material removal mechanisms are seen to be directly related to normal force on the tip. The critical load and scratch depth estimated from the scratch depth profile after scratching and the friction profile are 268.60 mN and 335.10 nm, respectively. If the load and scratch depth are under the critical values, the glass-ceramic rigid substrate will undergo plastic flow rather than fracture. The formula of critical depth of cut described by Bifnao et al. is modified based on the difference of critical scratch depth     

Design and fabrication of superconducting HEB mixer

This paper describes the design and fabrication of superconducting hot electron bolometer （HEB） mixer based on ultra-thin superconducting NbN films. The high quality films were epitaxially grown on high resistance Si substrates. The device was fabricated by magnetron sputtering, electron beam lithography （EBL）, reactive ion etching （RIE）, lithography, and so on. The device＇s resistance-temperature （R-T） curves and current-voltage （I-V） curves were studied. The results of THz response of the device are presented. Y-factor technique was used to measure the device＇s noise temperature. When the device was irradiated with a laser radiation of 2.5 THz, the obtained lowest noise temperature of the device was 2213 K.     

深黄被孢霉Mortierella isabelina粉对小鼠LPO、SOD和免疫器官的影响

以昆明种小鼠为对象分别研究了深黄被孢霉粉对小鼠LPO、SOD、抗疲劳、耐缺氧等生理指标以及对脾脏、胸腺等免疫器官的影响。昆明种小鼠分组，分别灌服深黄被孢霉粉和等量生理盐水，每d1次，15d后测定各项生理指标。结果表明，试验组动物血清LPO含量比对照组下降0.8mmol/L,SOD含量升高187u/ml，抗疲劳时间延长62min，耐缺氧能力延长6min，胸腺指数增中1.7%，脾指数增加5.6%。结果显示深黄被孢霉粉具有拮抗自由基、延缓衰老、抗疲劳、耐缺氧、抵抗不良环境和增强免疫功能的作用。     

Microstructure and electrolysis behavior of self-healing Cu-Ni-Fe composite inert anodes for aluminum electrowinning

The microstructure evolution and electrolysis behavior of (Cu₅₂Ni₃₀Fe₁₈)-xNiFe₂O₄ (x=40wt%, 50wt%, 60wt%, and 70wt%) composite inert anodes for aluminum electrowinning were studied. NiFe₂O₄ was synthesized by solid-state reaction at 950℃. The dense anode blocks were prepared by ball-milling followed by sintering under a N₂ atmosphere. The phase evolution of the anodes after sintering was determined by scanning electron microscopy and energy-dispersive X-ray spectroscopy. The results indicate that a substitution reaction between Fe in the alloy phase and Ni in the oxide phase occurs during the sintering process. The samples were also examined as inert anodes for aluminum electrowinning in the low-temperature KF-NaF-AlF₃ molten electrolyte for 24 h. The cell voltage during electrolysis and the corrosion scale on the anodes were analyzed. The results confirm that the scale has a self-repairing function because of the synergistic reaction between the alloy phase with Fe added and the oxide phase. The estimated wear rate of the (Cu₅₂Ni₃₀Fe₁₈)-50NiFe₂O₄ composite anode is 2.02 cm·a-1.     

MasterCAM在辊刀刀刃加工中的应用

本文从数控铣削编程的基本要点、Mastercam基本铣削编程功能介绍、数控编程的基本流程、数控铣削编程的应用等几个方面总结出一些经验体会。结合辊刀加工实例,详细阐述了MasterCAM在软件自动编程过程中的设置过程,介绍了Mastercam后置处理程序的结构、功能以及定制方法,同时也为辊刀加工过程提供了一些参考。     

害虫防治决策的复序贯分析方法及抽样技术

复序贯抽样决策技术实际应用的受限,原因在于截止限序贯抽样模型的缺乏。在检验害虫种空间格局回归模型,的基础上,推导出了目前国内常用检验回归模型的截止限序贯抽样模型,并将其运用于复序贯分析决策过程中,实例分析表明,对于同一种生物群,在一定的精度（Ｄ）和置信水平（ta）要求下,复序贯抽样决策方法可以大幅度地节约抽样成本。