PGE patterns of ores of Dajing Cu-polymetallic deposit in Linxi County,Inner Mongolia: Indicator to source of metallogenic elements

By comparing PGE patterns of sulfide ores with that of basic-ultrabasic dikes occurring in the Dajing Cu-polymetallic deposit, we discover that there are similar positive slopes between the basic-ultrabasic dikes and the black ores composed mainly of sphalerite and galena, reflecting affinity of their source. The PGE patterns of the yellow ores composed basically of chalcopyrite, arsenopyrite and pyrite are actually different. One is close to the pattern of the mantle lherzolite, and others resemble the pattern of the basic rocks. However, the concentrations of Ru are higher in the yellow ores, reflecting that sulfur attains or approaches saturation in their parent magma. The PGE characteristics of ores and dikes show that the magmas derived from the deep of crust and the metallogenic elements were supplied mainly by growth material of the crust. In addition, the mantle-derived magma also offered some elements.     

Microelement analysis of source of raw materials of terracotta warriors and horses of Qin’s Mausoleum in pits No. 1 and No. 2

In order to search for sources of the raw material of the Qin’s terracotta warriors and horses, we selected 20 samples of pottery warriors and pottery horses of the Qin’s Mausoleum from pit No. 1, 19 samples of pottery warriors and brick from pit No. 2, 20 samples of clays near the Qin’s Mausoleum and 2 samples of Yaozhou porcelain bodies. The 32 kinds of element content of each sample were measured by neutron activation analysis (NAA). These data were analyzed by fuzzy cluster analysis, the trend cluster analysis diagram was obtained. The results showed that samples of terracotta warriors and horses from pits No.1 and No. 2 were closely related to the loam layer near Qin’s Mausoleum, but their relations with the loess layers were not so close, and they were out of all relation to Yaozhou porcelain bodies. Thus, it could be deduced that the Li Mountain clay may be considered as the original place of the raw materials of the terracotta warriors and horses, the kiln sites might be located nearby the Qin’s Mausoleum.     

非线性4n阶常微分方程的非线性三点边值问题解的存在性

利用“上下解”的方法，讨论了非线性4n阶常微分方程y^(4n)=f(t,y,y′，…，y^(4n-1)满足条件g2i(y^2i)(a),y^(2i 1)(a))=0 i=0,1,…，2n-3 g4n-4(y^4n-4(a),y^(4n-3)(a),y^(4n-2)(a),y^(4n-1)(a))=0 g4n-3(y(b),6′(b),…，y^(4n-6)(b))=0 g4n-2(y^4n-5)(b),y^(4n-4)(b))=0 g4n-1(y^4n-3)(b),y^(4n-2)(b))=0 g2i 1(y^2i 1)(c),y^(2i 2(c))=0 i=0,1,…，2n-4 g4n-5(y^(4n-5(c),y^(4n-4)(c),…,y^(4n-1)c(c))=0 的非线性三点边值问题解的存在性.     

泵送高强粉煤灰混凝土的研制

通过掺加减水剂，调整水灰比等途径配制了泵送高强粉煤灰混凝土，并力求加在粉煤灰掺量以降低混凝土成本，介绍了泵送混凝土配合比，分析讨论了泵送高强粉煤灰混凝土的性能。     

非圆齿轮传动串联曲柄滑块机构方案及其优化

通过对曲柄滑块机构运动特性的研究，提出将非圆齿轮特有的变传动比特性引入曲柄滑块机构的方案，以改善滑块的加速度特性，并对该非圆齿轮及曲柄滑块机构的设计参数进行了优化。结果表明，该方案可改善滑块的加速度特性。     

齿面润滑压力和油膜厚度的数值分析

采用梯度－牛顿联合法对直齿圆柱齿轮传动进行了弹流润滑数值分析，得出了沿齿廓各啮合点的弹流压力分布及最小油膜厚度，为齿轮传动的摩擦学设计提供了初步的理论依据。     

基于VC的非圆齿轮齿形设计

依据非圆齿轮啮合原理，确定轮齿在节曲线上的位置，并推导了轮齿的齿廊，齿顶，齿根的曲线方程，应用VC编程及交互技术实现了非圆齿轮齿形的计算机辅助设计，增强了非圆齿轮设计的直观性，为非圆齿轮的传动模拟奠定了基础。     

水电工程中不锈钢材料冲蚀磨损与腐蚀的交互作用

通过水轮机目前应用较多的不锈钢材料在冲蚀磨损过程中电化学腐蚀及抗冲蚀磨损性能的研究，区分出了纯磨损、纯腐蚀、磨损对腐蚀的促进分量，及其腐蚀对磨损的促进分量等在材料失效过程中各占的比例。考察了试验材料的抗冲蚀磨损特性及其磨损与腐蚀间的交互作用，并对其失效机制进行了探索性分析。结果表明：在不同的冲蚀速度下，0Cr13Ni5Mo不锈钢的冲蚀磨损失重率小于1Cr18Ni9Ti不锈钢材料；试验材料在冲蚀磨损总失重率中，纯磨损率是占主要的；随着冲蚀速度的增加，磨损对腐蚀的促进作用也增加，同时也加强了腐蚀对磨损的促进作用。     

一种新型电磁搅拌器计算机控制系统

介绍一种电磁搅拌器分布式计算机控制系统，下位机以内含式PLC为核心控制多台电磁搅拌器；上位机可进行工况设置，存储和远程现场监控，上位机和下位机采用串行联接，为保证实时性，本系统采用双字节通信编码技术。     

BP算法应用于智能传感器的数据处理

利用BP算法具有的非线性映射能力对传感器标定数据进行输入－输出特性的反非线性逼近，将其作为智能传感器系统的非线性校正软件，使传感器在该软件的支持下提高测量精度。用传感器实验数据通过训练的网络，测量相对误差由原来的6．66％下降至0．98％。