Study and Application of Internal Coating Technique to Drag Reduction of the Trunk Pipeline for the West-East Gas Pipeline

Coverage layer coated in the internal wall of pipeline enables the friction drag to be reduced, the throughput and the gas transmission efficiency to be increased, the frequency of pigging and the number of the intermediate compressor station to be reduced, and the power consumption of the compressor to be decreased etc. The drag reduction is a high advanced scientific technique with outstanding economical benefit. The study and application of internal coating technique for drag reduction of 4000km trunk pipeline in West-East gas transmission pipeline (WEGTP) project are described, in which the main points are the drag reduction principle, coating process and the indoor study of this technique with own-decided knowledge property right at home.     

基于银薄膜/荷叶SERS效应直接检测婴儿配方奶粉中三聚氰胺

以天然荷叶为衬底,结合真空磁控溅射法沉积银薄膜,制备出了一种高效的表面增强拉曼散射(SERS)活性基底.研究发现银/荷叶基底对婴儿配方奶粉中掺杂的三聚氰胺(MA)表现出良好的识别能力,而不需作额外的样品预处理.对掺杂不同浓度三聚氰胺的奶粉溶液进行定量分析,在5~50 mg/L质量浓度范围内获得了较好的线性关系(线性相关系数R20.99).根据3σ准则,检测极限估计为1 mg/L.此外,银/荷叶基底具有良好的均匀性和重复性(相对标准偏差为7.64%和10.54%).该方法对婴儿配方奶粉中三聚氰胺的检测具有简单快速、成本低且无损等优点.     

新的f(R)黑洞

f（R）引力是一个直接拓展广义相对论的修正引力理论,它的拉格朗日量是一个仅含曲率标量R的任意函数f（R）.在F（r）=1+αr的条件下（F（r）≡（df（R（r）））/（dr）和αr是一个对广义相对论小的修正量）,导出了度规f（R）引力理论中场方程的精确球对称真空解.此外,考虑了这个黑洞背景时空中的标量场扰动.用六阶WKB （Wentzel-Kramers-Brillouin）方法,讨论了拟正则模和这个黑洞的参数之间的关系,得出这个黑洞是稳定的结论.     

高校参与城乡结合部社区体育文化建设研究 ——以安徽省为例

采用问卷调查法、数理统计法等,对安徽省新型城镇化进程中高校参与城乡结合部社区体育文化建设情况进行调查。结果表明:安徽省高校体育场馆设施对城乡结合部社区居民开放使用的最主要形式是限制性开放、象征性收费、相关领导和体育教师都参与了城乡结合部社区体育文化建设、学生参与城乡结合部社区体育文化建设最主要的形式是在老师的组织下跟同学一起参与、举办体育文化活动项目最多的是乒乓球。分析了高校在城乡结合部社区体育文化建设中的作用有其体育资源能够为城乡结合部社区体育文化建设提供软件和硬件保障,有利于培养城乡结合部社区居民的终身体育意识,有利于推进全民健身计划。从加强高校参与城乡结合部社区体育文化建设的规章制度建设、增加经费投入等方面提出安徽省新型城镇化进程中高校参与城乡结合部社区体育文化建设的一些建议。     

铕掺杂氧化钇的密度泛函第一性原理研究

基于第一性原理密度泛函,开展了氧化钇(Y_2O_3)的晶体结构和电子性质的计算研究,对比实验结果验证了计算方法的可行性.通过超元胞模型的密度泛函计算,探究了氧化钇主要本征点缺陷和不同格点阳离子铕(Eu)取代掺杂的形成能.结果表明,富氧条件有利于Eu杂质原子掺入氧化钇晶格,低费米能条件下,Eu原子易于取代周围6个O原子具有中心反演对称性的钇原子;在高费米能条件下,杂质原子对两种格点钇原子取代几率相等.本研究对于提升Eu掺杂氧化钇的发光效率具有一定的指导意义.     

配置500 MPa箍筋混凝土梁在间接荷载作用下受剪性能的研究

对3根配置500 MPa箍筋的混凝土梁进行间接加载试验,分析了高强箍筋混凝土梁的受力性能、斜裂缝开展情况以及破坏形态.结合ABAQUS有限元软件研究了剪跨比和配箍率对试验梁抗剪承载力的影响.研究表明：《混凝土结构设计规范》能很好地预测配置500 MPa箍筋混凝土梁在直接加载作用下的抗剪承载力;间接加载梁与直接加载梁相比,抗剪承载力有一定程度的降低,降低因素主要为剪跨比和配箍率;规范中附加横向配筋的构造要求可以有效补偿间接加载作用下高强箍筋梁抗剪承载力的降低.     

Microstructure and corrosion behavior of Al<Subscript>3</Subscript>Ti/ADC12 composite modified with Sr

In this study, we investigated the effect of the addition of Sr (0wt%, 0.1wt%, 0.2wt%, and 0.3wt%) on the microstructure and corrosion behavior of Al₃Ti/ADC12 composite by optical microscopy, X-ray diffraction, scanning electron microscopy, and energy diffraction spectroscopy. The results reveal that the α-Al phases were nearly spherical and 40 μm in size and that the eutectic Si phases became round in the composite when the Sr content reached 0.2wt%. The Al₃Ti particles were distributed uniformly at the grain boundary. The results of the corrosion examination reveal that the Al₃Ti/ADC12 composite exhibited a minimum corrosion rate of 0.081 g·m–2·h–1 for an Sr content of 0.2wt%, which is two thirds of that of unmodified composite (0.134 g·m–2·h–1). This improved corrosion resistance was due to galvanic corrosion, which resulted from the low area ratio of the cathode to anode regions. This caused a low-density corrosion current in the composite, thereby yielding optimum corrosion resistance.     

Microstructural characterization and oxidation resistance of multicomponent equiatomic CoCrCuFeNi-TiO high-entropy alloy

CoCrCuFeNi-TiO was prepared by arc melting of the pure elements and Ti₂CO powder under an Ar atmosphere. Both CoCrCuFeNi and CoCrCuFeNi-TiO alloys are composed of a face-centered cubic (fcc) solid solution, whereas the alloys of CoCrCuFeNi-TiO are basically composed of an fcc solid solution and TiO crystals. The microstructures of CoCrCuFeNi-TiO are identified as dendrite and interdendrite structures such as CoCrCuFeNi. The morphology of TiO is identified as an equiaxed crystal with a small amount of added Ti₂CO. By increasing the amount of Ti₂CO added, the TiO content was dramatically increased and part of the equiaxed crystals changed to a dendrite structure. A test of the oxidation resistance demonstrates that the oxidation resistance of CoCrCuFeNi-TiO is better than that of CoCrCuFeNi. However, as the TiO content increases further, a corresponding decrease is observed in the oxidation resistance.     

关于局部对称空间的几个Pinching定理

研究了局部对称空间中具有平行平均曲率向量的紧致伪脐子流形,利用活动标架法和Hopf极大值原理讨论了子流形的Pinching问题,即估算子流形第二基本形式模长的平方的Laplacian,再对截面曲率和Ricci曲率加以某种限制,得到这类子流形成为全脐子流形的几个拼挤定理.     

竖向偏心荷载作用下吸力桶荷载-变形特性非共轴本构数值分析

在竖向偏心荷载作用下建立吸力式桶形基础数值分析模型,采用砂土非共轴弹塑性本构模型研究土体主应力方向旋转和非共轴角度的变化规律,探讨非共轴特性对吸力桶力学特性的影响.主要研究结论表明:在地基变形过程中,非共轴角度呈现先增大后减小的发展趋势.随着偏心距的增加,等效塑性应变在地基中的分布范围逐渐减小,非共轴特性也将减弱,非共轴特性对荷载-变形特性的影响逐渐减弱.对于桶壁端部阻力和桶壁外侧摩擦阻力,非共轴特性的影响随着偏心距的增加而减弱.对于桶体顶部阻力和桶壁内侧摩擦阻力,非共轴特性的影响随着偏心距的增加而逐渐显著.