基于模糊综合评价的电子政务网站公众满意度分析

电子政务门户网站是各级政府沟通公众与社会的窗口,公众满意度是体现电子政务门户网站建设水平及其影响力的一项重要指标.该文描述了电子政务门户网站公众满意度评价的现实背景及其意义,构建了政府门户网站公众满意度指标体系,并以湘潭市政府门户网站为背景,运用了定量与定性相结合的方法,依据模糊综合评价的相关理论进行了公众满意度的分析.     

盐酸羟胺自氧化法测定SOD活性的电化学方法研究

盐酸羟胺在碱性水溶液中发生自氧化反应,可产生O2-.,其自身被氧化为亚硝酸根离子,在酸性介质中SCN-催化亚硝酸根离子与二苯胺-4-磺酸反应生成具有电活性的亚硝基化合物在-0.60V处有一波形很好的二阶导数极谱峰。在一定条件下,极谱峰电流的大小与亚硝酸根离子的浓度呈线性关系。体系中加入SOD,使生成的亚硝酸根离子的量减小。由此建立了通过检测亚硝酸根离子的生成量来测定超氧化歧化酶活性的电化学方法,测定了酶活力曲线,并研究了常见的黄酮类化合物对O2-.的清除作用。     

Fast and accurate measurement of diffusion coefficient by Taylor’s dispersion analysis

This investigation aimed at improving the performance of Taylor's dispersion analysis for the fast and accurate measurement of diffusion coefficient of a minute solute in various solvents. The investigation was carried out on a capillary electrophoresis instrument by monitoring the UV absorption peak of a solute pulse and calculating the diffusion coefficient by peak efficiency. With L-phenylalanine as a main testing solute, some key factors were afterward disclosed including especially the capillary size, carrier flow velocity, injection volume and capillary conditioning. Peak tailing, large volume of sample injection and slow migration were found to underestimate the diffusion coefficient while very fast migration and high sample concentration caused overestimation. At a moderate flow velocity of 0.1―1 cm/s with a capillary of 72.44 μm I.D.×60 cm (50 cm effective) maintained at 25℃, the diffusion coefficient of aqueous L-phenylalanine was determined, giving a value of 7.02×10-6 cm2/s with error＜2% and relative standard deviation＜0.2% (n=3). The method was shown to be applicable to the measurement of various samples such as aqueous phenylalanine, acetone, phenol, toluene and benzene, and nonaqueous benzene (in ethanol or 1-butanol).     

Energetic particle radiations measured by particle detector on board CBERS-1 satellite

Using the data measured by energetic particle detector on board CBERS-01 and -02 for the past five years, statistics was made to show the general features of MeV electrons and protons along a solar synchronous orbit at an altitude of 780 km. This height is in the bottom region of the Earth's radiation belts. Detectors are inside the satellite cabinet and such continuous monitoring of particle radiation environment inside a satellite has seldom conducted so far. After a proper and careful treatment, it is indicated that the data inside satellite are well correlated with the radiation environment outside. Be-sides the agreement of the general distribution characteristics of energetic electrons and protons with similar observations from other satellites, attention is particularly paid to the disturbed conditions. Variations of particle fluxes are closely related with solar proton events, in general, electron fluxes of outer belt are well correlated with Dst index after three days' delay while the electron injection occurred almost at the same day during great magnetic storms. It is confirmed that both energetic electrons and protons appear in the Polar Cap region only after the solar proton events.     

单节锂离子电池保护电路的改进

提出了一种低成本的单节锂电池保护回路系统,采用0.6μm混合信号CMOS工艺和修调技术使芯片具有低功耗、高精度检测电压等特点.通过基准电路和取样电路设计的改进,使保护电路实现了多种保护功能,并且具有很高的检测电压精度.模拟结果表明,该电路在温度为25℃时过充电保护电压的检测精度达到了±25mV,耗电流仅为3.5μA,满足高精度检测电压的要求.     

当前底层小说写作的价值与局限

近年来,当代文学中陆续涌现出一批表现底层人民生活的作品,“底层写作”成为了新的美学激奋点。底层写作切入中国社会弱势群体的生存现状,延续了“五四”以来新文学的现实主义传统,立体地多层面地探寻与挖掘大时代背景下各式人物的生存、生活与生命,又以其关注弱势群体的人性光芒,对生命人生的深刻揭示而日益受到关注。本文在对当前部分底层文学作品作共性分析基础之上,探讨了底层写作对我们时代的必要价值,以及它取得的艺术成就和存在的写作局限。从而更好地总结底层文学写作的得与失,力图拨开底层文学发展中的迷雾,以期使底层文学在新世纪茁壮成长。     

绿色技术创新政策的国际经验对福建的借鉴与启示

绿色技术创新是福建可持续发展的重要途径。本文首先对美国、日本和欧盟的绿色技术创新的法律政策、财政税收支持政策、绿色采购政策和教育政策等四个方面进行深入分析,并与福建进行对比分析,找出目前福建在绿色技术创新政策的不足与发展方向,希望对福建省制订和完善绿色技术创新政府以及更好地推进资源节约型和环境最好型社会的建设具有借鉴意义。     

反应气氛对铝热还原氧化钛合成氮化钛的影响

研究在流动氮气和埋炭条件下铝热还原氮化TiO2的反应过程,借助于X射线衍射(XRD)和扫描电子显微镜(SEM)分别测试和观察两种气氛中不同温度下处理后产物的物相组成和显微结构。结果显示,与流动氮气氛下一样,在埋炭气氛下采用铝热还原氮化法可以制备氮化钛复相材料,但处理气氛明显影响着铝热反应的程度及产物的形貌,在埋炭条件下处理后的产物中氮化钛含量、晶粒大小、晶格常数明显低于流动氮气氛下处理产物中上述各项值;热力学计算发现埋炭条件下铝除参与铝热还原反应外,还与炭粉床中氧发生反应,使参与铝热反应的金属铝不足,造成产物中有剩余的金红石存在。     

机械产品功能建模及其求解策略的研究

简要阐述用于产品功能建模的标准功能基(SFB),并在SFB基础上完成产品功能建模;建立包括元功能层、功能对象层、行为层、结构组件层和结构关系层的功能求解模型,提出多层次柔性求解策略用于完成从功能到结构的映射;以实例对所提出的方法进行验证。     

RH生产X70管线钢的不同工艺研究

从冶金效果、设备性能、工艺条件等方面对LF-RH与RH-LF二次精炼法进行了全面的研究,分析了两种工艺下RH真空处理的特点,对两种工艺下管线钢中有害元素及夹杂物的控制进行了讨论.LF-RH与RH-LF工艺下生产的X70管线钢铸坯中的T[O]平均为14×10-6和19×10-6,显微夹杂物个数分别为2.48个/mm2和2.62个/mm2,达到很高的洁净度水平.LF-RH工艺铸坯中氮平均为53×10-6,RH-LF工艺条件下铸坯氮含量为平均38×10-6,为以后生产更高质量的管线钢积累了经验.