Experimental investigation and thermodynamic assessment of the yttriumhydrogen binary system

A coupled experimental investigation and thermodynamic study of the yttrium-hydrogen(Y-H) binary system were carried out to provide more comprehensive and quantitative insights into the key thermodynamic properties of this system. Y-H system in the full range of H/Y = 0–3.0 was investigated by accurate pressure composition isotherm(PCI) measurement to provide credible phase equilibria information and thermodynamic data.The phase boundaries obtained were in agreement with previous experimental data but with improved accuracy.With the guide of the crystal structures, all the solid phases were modelled using the three sublattice model. The Y-H phase diagram and thermodynamic parameters were calculated and assessed with the CALPHAD technique.The obtained results are in very good agreement with our experimental data and the published data reported in literature. The obtained thermodynamic database of Y-H system can be used to predict the hydrogenation behavior and decomposition temperatures of hydrides.     

Study on the hydrogen storage property of (TiZr0.1)xCr1.7-yFeyMn0.3 (1.05

Jigang Li  Li Xu  Xiaojing Jiang  Xingguo Li 《自然科学进展(英文版)》2018,28(4):470-477

Coupling effects of tungsten and molybdenum on microstructure and stressrupture properties of a nickel-base cast superalloy

In order to comprehensively understand the forming mechanism of abnormal phases solidified in a nickel-base cast superalloy with additives of tungsten and molybdenum, the coupling effects of W and Mo on the microstructure and stress-rupture properties were investigated in this paper. The results indicated that the precipitation of primary α-(W, Mo) phase depended tremendously on the amount of W and Mo addition. When the total amount of W and Mo was greater than 5.79 at%, α-(W, Mo) phase became easily precipitated in the alloy.With increasing of Mo/W ratio, the dendrite-like α-(W, Mo) phases were apt to convert into small bars or blockylike phases at the vicinities of γ′/γ eutectic. The morphological changes of α-(W, Mo) phase can be interpreted as the non-equilibrium solidification of W and Mo in the alloy. Since the large sized α-(W, Mo) phase has detrimental effects on stress-rupture properties in as-cast conditions, secondary cracks may mainly initiate at and then propagate along the interfaces of brittle phases and soft matrix. During exposing at 1100 ℃ for 1000 h, the α-(W, Mo) phases transformed gradually into bigger and harder M_6C carbide, which results in decreasing of stress-rupture properties of the alloy. Finally, the alloy with an addition of 14W-1Mo(wt%) maintained the longest stress lives at high temperatures and therefore it revealed the best microstructure stability after 1100 ℃/1000 h thermal exposure.     

The hidden disintegration of cluster heterogeneity in Fe-based glass-forming alloy melt

The evolution of liquid metal at high temperature is known much less than their solid states. This is partially due to that the message concerning clusters, metastable phase or heterogeneity in liquid is usually too slight to be traced. Here, we shed some light on the nature of structural evolution of Fe-based glass-forming alloy during overheating process by the investigation of high-temperature melt viscometry and first principles simulations. It was found that a structural transition around 1400 ℃ occurred in the melts of initial homogeneous ingot, heterogeneous ingot and amorphous ribbons jointly, and was confirmed by the results from differential scanning calorimeter(DSC), and ab initio molecular dynamics(AIMD). Combining these results with Fe-Si-B ternary phase diagram and the melting characteristics of Fe-B compounds, it is safe to conclude that the disintegration of Fe_2B type clusters to Fe_3B-type clusters leads to the observed transition. These results offer a significant reference for the preparation and property control of Fe-based amorphous alloys.     

应急资源配送中Dijkstra改进算法的研究

路径规划问题是应急资源配送中的核心问题,最短路径算法在路径规划过程中起着决定性的作用,在众多路径规划算法中最经典且最具代表性的就是Dijkstra算法。以传统的Dijkstra算法分析为基础,从存储结构和算法过程两个方面进行一定程度的改进,目的是在节点数和边数较多的情况下,提高网络模型的处理效率。以真实道路交通数据为基础进行相关实验,结果证明,改进后的Dijkstra算法可以有效减少节点的计算量,提高算法的运行效率。     

A New Algorithm for the Establishing Data Association Between a Camera and a 2-D LIDAR

In this paper,we propose a new algorithm to establish the data association between a camera and a 2-D Light Detection And Ranging sensor （LIDAR）.In contrast to the previous works,where data association is established by calibrating the intrinsic parameters of the camera and the extrinsic parameters of the camera and the LIDAR,we formulate the map between laser points and pixels as a 2-D homography.The line-point correspondence is employed to construct geometric constraint on the homography matrix.This enables checkerboard to be not essential and any object with straight boundary can be an effective target.The calculation of the 2-D homography matrix consists of a linear least-squares solution of a homogeneous system followed by a nonlinear minimization of the geometric error in the image plane.Since the measurement quality impacts on the accuracy of the result,we investigate the equivalent constraint and show that placing the calibration target nearby the 2-D LIDAR will provide sufficient constraints to calculate the 2-D homography matrix.Simulation and experimental results validate that the proposed algorithm is robust and accurate.Compared with the previous works,which require two calibration processes and special calibration targets such as checkerboard,our method is more flexible and easier to perform.     

反思在服务学习中的作用研究

反思是服务学习的一个重要特质,也是实施过程中一个重要的阶段,是保证服务学习质量,提升服务效果的重要组成部分。本文主要从反思的理论基础,反思的特质以及反思的作用等方面阐述反思在服务学习中的地位和价值,有助于更好地开展服务学习,提升服务学习效果。     

基于RSM和FEM的辊锻件长度控制技术

以某钩尾框精密辊锻工艺为研究对象,首次应用响应面法(RSM)和有限元数值模拟法(FEM)对精密辊锻件的长度控制问题进行了研究.首先以满足辊锻件长度和降低轧辊最大扭矩为目标,采用FORGE3有限元软件建立了RSM与FEM相结合的二阶分析模型,研究了轧辊间隙、摩擦因子、轧辊转速和坯料温度对辊锻件的长度和轧辊最大扭矩的显著性和影响规律;其次采用优化后的工艺参数对该辊锻工艺进行了再模拟,提出了辊锻件长度的调试原则,利用该原则和点的反追踪技术对辊锻模具进行了再设计,同时分析了设计、模拟和生产辊锻件的长度和辊锻过程的功率耗散和分布.研究结果表明:应用RSM和FEM可准确有效地掌握精密辊锻件的长度控制技术.     

Review of public-key cryptosystem based on the error correcting code

The paper review the public-key cryptosystems based on the error correcting codes such as Goppa code, BCH code, RS code, rank distance code, algebraic geometric code as well as LDPC code, and made the comparative analyses of the merits and drawbacks of them. The cryptosystem based on Goppa code has high security, but can be achieved poor. The cryptosystems based on other error correcting codes have higher performance than Goppa code. But there are still some disadvantages to solve. At last, the paper produce an assumption of the Niederreiter cascade combination cryptosystem based on double public-keys under complex circumstances, which has higher performance and security than the traditional cryptosystems.     

ATP-induced Ca<Superscript>2+</Superscript>-signalling mechanisms in the regulation of mesenchymal stem cell migration

The ability of cells to migrate to the destined tissues or lesions is crucial for physiological processes from tissue morphogenesis, homeostasis and immune responses, and also for stem cell-based regenerative medicines. Cytosolic Ca²⁺ is a primary second messenger in the control and regulation of a wide range of cell functions including cell migration. Extracellular ATP, together with the cognate receptors on the cell surface, ligand-gated ion channel P2X receptors and a subset of G-protein-coupled P2Y receptors, represents common autocrine and/or paracrine Ca²⁺ signalling mechanisms. The P2X receptor ion channels mediate extracellular Ca²⁺ influx, whereas stimulation of the P2Y receptors triggers intracellular Ca²⁺ release from the endoplasmic reticulum (ER), and activation of both type of receptors thus can elevate the cytosolic Ca²⁺ concentration ([Ca²⁺]_c), albeit with different kinetics and capacity. Reduction in the ER Ca²⁺ level following the P2Y receptor activation can further induce store-operated Ca²⁺ entry as a distinct Ca²⁺ influx pathway that contributes in ATP-induced increase in the [Ca²⁺]_c. Mesenchymal stem cells (MSC) are a group of multipotent stem cells that grow from adult tissues and hold promising applications in tissue engineering and cell-based therapies treating a great and diverse number of diseases. There is increasing evidence to show constitutive or evoked ATP release from stem cells themselves or mature cells in the close vicinity. In this review, we discuss the mechanisms for ATP release and clearance, the receptors and ion channels participating in ATP-induced Ca²⁺ signalling and the roles of such signalling mechanisms in mediating ATP-induced regulation of MSC migration.