Study on the hydrogen storage property of (TiZr0.1)xCr1.7-yFeyMn0.3 (1.05

Jigang Li  Li Xu  Xiaojing Jiang  Xingguo Li 《自然科学进展(英文版)》2018,28(4):470-477

p—GaP欧姆接触的特性及其冶金性质

本文研究了用Au-Be合金材料制备p-GaP欧姆接触电极的最佳条件.报道了接触电阻、L-V特性以及用SEM观察电极表面形貌的实验结果,并对获得较低接触电阻的电极有关冶金性质进行了分析.进而,改进了在p-GaP外延层制备欧姆电极的工艺技术,在540℃-560℃温度范围内制得多批I-V特性好、大约1×10~3Ω·cm~2低接触电阻的发光二极管.     

一种多时段费用变动型存贮策略的优化

提出了一种多时段费用变动型ＥＯＱ存贮策略，讨论了这种策略的优化结构，给出优化求解的算法．     

MODIFIED SPATIAL DECOMPOSITION TECHNIQUE FOR SOLUTION OF LARGE ELECTROMAGNETIC SCATTERING PROBLEMS

IntroductionUsingtheMethodofMoments(MoM)t1)forthescatteringbyelectricallylargebodiesresultsinlargematriceswhichdictateexcessivecomputerstorageandexecutiontime.TheSpatialDecompositionTechnique(SDT)[2jwasproposedtocircumventhighdemandonthecomputerresourcesandalsoreducenumericaldiffculties.ltdividesthescattererintoanarbitrarynumberofNdistinctspatialsubzones'Atthevirtualinterfaceseparatingthetwosubzones,thetangentialvirtualcurrentspnonesideoftheinterfacemustbeequal,butoppositetothetangentialvi…     

故障在线监测自编码式棒位指示系统

提出了一种结构简单、工作可靠、测量精度高的控制棒位置指示系统—故障在线监测自编码式棒位指示系统。该系统探测器由一个励磁线圈、Ｎ个测量线圈、一个补偿线圈和一根芯棒组成。其中，芯棒由Ｍ段导磁材料与Ｍ１段非导磁材料间隔分布构成。当芯棒随控制棒在测量线圈中央轴向运动时，励磁线圈上输入的交变信号必然在测量线圈上产生交变感应信号，通过接收这些测量线圈的输出信号并进行处理从而判断控制棒棒位。本文详细地介绍了该系统工作原理、硬件结构、软件框图及试验。结论表明：它比现役压水堆使用的线圈编码棒位指示系统性能优越并具有更多的功能—故障在线监测功能，它可完全满足供热堆的棒位测量要求并可用于其他水堆的棒位指示。     

现代科学技术与物理学

本文阐述了现代科学技术发展的特点和趋势、物理学的发展对现代科技发展的推动作用以及现代科技发展对物理学教学提出的挑战．     

专家系统知识库验证：Ⅱ.基于决策表的知识库验证工具KBV

说明决策表和知识库之间的关系，详细介绍了作者开发的基于决策表的知识库验证工具ＫＢＶ。给出了在ＫＢＶ中检查冗余，矛盾，循环，守完备性的算法。ＫＢＶ能对包含特定规则，通用规则和框架的知识库进行验证。由于考虑了各子决策表之间的逻辑关系，ＫＢＶ得到的结果是全局的。     

感应电动机的一种完全解耦控制方法

给出了感应电动机的一种直接控制方法，按这种方法施加控制输入，可使感应电动机调速系统成为全解耦的常系数线性系统。     

化学还原法扩展Fe—Cu系纳米合金fcc相固溶度的研究

利用化学还原法制备了含有少量硼的过饱和Ｆｅ－Ｃｕ固溶合金。ｆｃｃ相的固溶度被扩展至铁含量接近８０％，大大超过了用其它方法制备所能达到的固溶度，并且在退火过程中ｆｃｃ结构相当稳定。ｆｃｃ相的扩展以及相当高的稳定性与硼的存在有关。     

Leaching Mechanism of Complicated Antimony-Lead Concentrate and Sulfur Formation in Slurry Electrolysis

Anodic reaction mechanism of complicated antimony-lead concentrate in slurry electrolysis was investigated by the anodic polarization curves determined under various conditions. The main reactions on the anode are the oxidations of FeCln^(2-n) . Though the oxidation of jamesonite particle on the anode can occur during the whole process, it is less. With the help of mineralogy studies and relevant tests, the leaching reaction mechanism of jameson[to and gudmundite during slurry electrolysis was ascertained. Because of the oxidation reaction of FeCl3 produced by antimony-lead concentrate itself, the non-oxidation complex acid dissolution of jameson[re, the oxidation complex acid dissolution of gudmundite, and the oxidation of air carried by stirring, the leaching ratio of antimony reaches about 35% when HCl-NH4Cl solution is used to leach antimony-lead concentrate directly. So when the theoretical electric quantity is given to oxidation of antimony in slurry electrolysis, all of antimony, lead and iron containing in antimony-lead concentrate, are leached. The formation of sulfur is through the directly redox reaction of Fe^3 and jameson[re. The S^2- in jamesonite is oxidized into S^0 , and forms the crystals of sulfur again on the spot. The redox reaction of Fe^3 and H2S formed by non-oxidative acid dissolution of jamesonite is less.