粉粒状物料透气性系数的测定

对经过分级的六种均齐粉粒状物料进行透气性系数测定。结果表明:球形小米颗粒((?)_p=1.70mm),透气性系数K=1.191×10~(-9)m~2,在整个固定床范围内都符合达西定律;石灰石粉((?)_P=0.900mm),K=5.831×10~(-10)m~2。文中还讨论了达西定律的适用依据和透气性系数的影响因素。     

Intramammary expression and therapeutic effect of a human lysozyme-expressing vector for treating bovine mastitis

To develop a gene therapy strategy for treating bovine mastitis, a new mammary-specific vector containing human lysozyme (hLYZ) cDNA and kanamycin resistance gene was constructed for intramammary expression and clinical studies. After one time acupuncture or intracisternal infusion of healthy cows with 400 μg of the p215C3LYZ vector, over 2.0 μg/ml of rhLYZ could be detected by enzymatic assay for about 3 weeks in the milk samples. Western blotting showed that rhLYZ secreted into milk samples from the vector-injected cows had molecular weight similar to that of the natural hLYZ in human colostrums. Twenty days after the primary injection, the quarters were re-injected with the same vector by quarter acupuncture and even higher concentrations of rhLYZ could be detected. Indirect competitive ELISA of milk samples showed that the vector injection did not induce detectable humoral immune response against hLYZ. Clinical studies showed that twice acupuncture of quarters with the p215C3LYZ vector had overt therapeutic effect on clinical and subclinical mastitis previously treated with antibiotics, including disappearance of clinical symptoms and relatively high microbiological cure rates. These data provide a solid rationale for using the vector to develop gene therapy for treating bovine mastitis.     

双馈电机运行速度对稳态性能的影响

研究双馈电机运行速度对双馈电机稳态性能的影响．首先对比了双馈电机运行于超同步转速及次同步转速时的稳态波形，然后对谐波及稳态参数的变化进行了分析．研究表明双馈电机稳态运行速度对其稳态运行性能有较大影响．     

岩爆的力学模型及物理数值模拟述评

结合现有的岩爆研究情况，对岩爆发生机制的力学模型以及在室内实验和数值模拟方面所做的工作进行总结，介绍可资岩爆借鉴的研究领域，提出岩爆的研究方向。     

DCS和FCS及其在火电厂中的应用

介绍了集散控制系统和现场总线控制系统，并对它们在火电厂中的应用做了分析。     

Metamorphic Algorithm of Self-reconfigurable Modular Robotic System

Introduction Aself reconfigurableroboticsystemconsistsofman simpleidenticalmechatronicmodules.Thesemodulesca connectanddisconnectfromonetoanothertochangethe overalltopology.Thesystemcanautonomouslyandynamicallyadaptitsshapetosuittheneedsofthetask hand,e.g.manipulation,locomotion,andcreationo staticstructures.Thegeneralphilosophyofsel reconfigurableroboticsystemistosimplifythedesignanreducemanufacturingcostandenhancefunctionalityan versatilitythroughalargernumberofidenticalmodules.I addition…     

论法律部门的划分标准与经济法的地位

传统法律部门的划分因其片面强调客观性和按法律调整的社会关系的性质来划分法律部门而有着固有的、难以弥补的缺陷，因此要令人信服地说明经济法作为独立的部门法的地位，就必须抛弃旧的框框，按主客观一致，以主观为主导的指导思想。重新来确定法律部门的划分标准。     

整机老炼条件的优化设计

本文通过工程实例，阐述如何利用现有信息来设计产品的老炼条件，以使它在保证产品达到规定可靠性的前提下尽量节省成本     

Pb-Sn-Bi三元系α相固溶体的点阵参数

应用X射线衍射法测定了Pb-Sn-Bi三元系Pb基α相固溶体的点阵参数,发现点阵间距与成分呈线性变化,对两批实验数据分别进行回归分析,得到点阵参数-浓度关系的统一解析式: α=0.49495X_(Pb)+0.47813X_(Sn)+0.50629X_(Bi)。其F检验置信度大于99.9％,残余标准差σ=6.4×10~(-5) nm,分析点阵畸变的影响因素表明尺寸效应是控制固溶体点阵行为的主要因素。     

最优化法在计算平台破损后浮态及初稳性中的应用

提出了一种用优化方法求解平台破损进水后浮态和初稳性的方法,并用所编制的计算机程序对平台破损后的浮态和初稳性进行了计算。文中给出了某一平台在下沉就位过程中的计算实例,计算结果表明:利用优化方法来求解平台破损进水后的浮态和初稳性是切实可行的.