Primary Sn-rich titianite in the Qitianling granite, Hunan Province, southern China: An important type of tin-bearing mineral and its implications for tin exploration

The Qitianling calc-alkaline granite in Hunan Province (South China) has attracted much attention since the discovery of the Furong super-large tin deposit. The present study provides new mineralogical data to address their implications for exploration of tin deposits. In the Taoxiwo granite in the southeastern part of the Qitianling granite body, Sn-rich titanite was identified as an important type of Sn-bearing mineral. The titanite commonly occurs with biotite as euhedral crystals, exhibiting typical envelope-like shape and sector-zoning texture. These indicate that the titanite most likely crystallized in the magmatic stage. Electron-microprobe analyses show that the titanite is enriched in tin up to 1.12 wt% SnO₂, with an average of 0.43 wt%. With the crystallization of the granite, primary minerals undertook hydrothermal alteration by magma-derived fluids. Subsequently, in the hydrothermal stage, the primary Sn-bearing titanite was altered (at least partially), but still preserved its typical envelope-shaped outline. Micro-scale cassiterite is a representative product of such alteration; other secondary minerals include fluorite, ilmenite, Sn-bearing rutile and quartz. Therefore, the titanite, commonly present in the calcalkaline granites, can be treated as an important Sn-carrying mineral in the Qitianling granite, reflecting the primary magmatic environment with tin enrichment. The hydrothermal alteration of the primary titanite and subsequent crystallization of cassiterite recorded a process of leaching and accumulation of tin in magmatic-hydrothermal evolution of the Sn-bearing granite. Thus, this titanite has important implications for tin exploration. Supported by National Natural Science Foundation of China (Grant Nos. 40730423 and 40221301) and Project of China Geological Survey (Grant No. 1212010632100)     

Variable diffusion boundary layer and diffusion flux at sediment-water interface in response to dynamic forcing over an intertidal mudflat

The diffusion boundary layer (DBL) significantly limits the exchange between sediment and overlying water and therefore becomes a bottleneck of diffusive vertical flux at the sediment-water interface (SWI). Variable DBL thickness and diffusion flux in response to dynamic forcing may influence replenishment of nutrients and secondary pollution in coastal waters. In situ measurements of velocity in the bottom boundary layer (BBL) and oxygen concentration in the DBL were made over an intertidal mudflat, using an acoustic Doppler current and mini profiler. A linear distributed zone in the oxygen profile, the profile slope discontinuity and variance of concentration can be used to derive accurate DBL thickness. Diffusion fluxes calculated from the water column and sediment are identical, and their bias is less than 6%. A numerical model PROFILE is used to simulate the in situ dissolved oxygen profile, and layered dissolved oxygen consumption rates in the sediment are calculated. The DBL thickness (0.10-0.35 mm) and diffusion flux (15.4-53.6 mmol m 2 d 1) vary with a factor of 3.5 during a tidal period. Over an intertidal mudflat, DBL thickness is controlled by flow speed U in the BBL, according to δDBL=1686.1DU 1+0.1 (D is the molecular diffusion coefficient). That is, the DBL thickness δDBL increases with decreasing flow speed U. Changes of diffusion flux at the SWI are caused by variations in the water above the sediment and the turbulent mixing intensity. The diffusion flux is positively related to the turbulent dissipation rate, friction velocity and turbulent energy. Under the influence of dynamics in the BBL, DBL thickness and flux vary significantly.     

Mechanism of brittle-ductile transition of a glass-ceramic rigid substrate

The hardness, elastic modulus, and scratch resistance of a glass-ceramic rigid substrate were measured by nanoindentation and nanoscratch, and the fracture toughness was measured by indentation using a Vickers indenter. The results show that the hardness and elastic modulus at a peak indentation depth of 200 nm are 9.04 and 94.70 GPa, respectively. These values reflect the properties of the glass-ceramic rigid substrate. The fracture toughness value of the glass-ceramic rigid substrate is 2.63 MPa·m1/2. The material removal mechanisms are seen to be directly related to normal force on the tip. The critical load and scratch depth estimated from the scratch depth profile after scratching and the friction profile are 268.60 mN and 335.10 nm, respectively. If the load and scratch depth are under the critical values, the glass-ceramic rigid substrate will undergo plastic flow rather than fracture. The formula of critical depth of cut described by Bifnao et al. is modified based on the difference of critical scratch depth     

Design and fabrication of superconducting HEB mixer

This paper describes the design and fabrication of superconducting hot electron bolometer （HEB） mixer based on ultra-thin superconducting NbN films. The high quality films were epitaxially grown on high resistance Si substrates. The device was fabricated by magnetron sputtering, electron beam lithography （EBL）, reactive ion etching （RIE）, lithography, and so on. The device＇s resistance-temperature （R-T） curves and current-voltage （I-V） curves were studied. The results of THz response of the device are presented. Y-factor technique was used to measure the device＇s noise temperature. When the device was irradiated with a laser radiation of 2.5 THz, the obtained lowest noise temperature of the device was 2213 K.     

Development of a middle and low latitude theoretical ionospheric model and an observation system data assimilation experiment

On the basis of previous work, we develop a middle and low latitude theoretical ionospheric model in this paper, named Theoretical Ionospheric Model of the Earth in the Institute of Geology and Geophysics, Chinese Academy of Sciences （TIME-IGGCAS）. TIME-IGGCAS solves the equations of mass continuity, motion and energy of electron and ions self-consistently and uses an eccentric dipole field approximation to the Earth＇s magnetic field. We combine the Eulerian and Lagrangian approaches in the model and take account of the plasma ExB drift velocity. Calculation results reveal that the model is steady and credible and can reproduce most large-scale features of ionosphere. By using TIME-IGGCAS, we carried out an observation system data assimilation experiment. Assimilation results show that the ExB drift velocity can be accurately estimated by ingesting the observed foF2 and hmF2 into the model applying nonlinear least-square fit method. We suggest that this work is of great significance in the development of ionospheric data assimilation model to give better nowcast and forecast of ionosphere.     

An Improved Identity-Based Society Oriented Signature Scheme with Anonymous Signers

In this paper, we present an improved identity-based society oriented signature scheme with anonymous signers, which satisfies： （1） when members leave or join an organization, the public verification key and the signature verification procedure are unchanged; （2） a user participates in several organizations at the same time, her secret key is only related with her identity. However, no previous schemes have these two properties.     

近红外光谱技术对液态奶制品中乳糖、脂肪及蛋白质的定量检测

用InfraXact多功能近红外分析仪和正交实验设计,研究了不同预处理和校正方法对建模效果的影响,建立了液态奶制嘉中脂肪、乳糖和蛋白质质量含量的定标模型。利用目标函数法对模型进行评定,并对选出的最优模型的适用性进行验证．结果表明,最优模型对糖、脂肪和蛋白质的相对标准偏差分别为4．12％,7．04％,9．61％,相对误差分别为2．82,6．28,2．72．正交实验方法能综合考虑不同预处理方法和校正方法对模型建立的影响．近红外光谱分析法能够实现对牛奶中脂肪、乳糖和蛋白质质量含量进行快速、无损的定量检测．     

Development and application of flexible substrate sensors in instantaneous heat flux measurement

A new type of sensor with the flexible substrate is introduced. It is applicable in measuring instantaneous heat flux on the model surface in a hypersonic shock tunnel. The working principle, structure and manufacture process of the sensor are presented. The substrate thickness and the dynamic response parameter of the sensor are calculated. Because this sensor was successfully used in measuring the instantaneous heat flux on the surface of a flat plate in a detonation-driven shock tunnel, it may be effective in measuring instantaneous heat flux on the model surface.     

C-isotope composition and correlation of the Upper Neoproterozoic in Keping area, Xinjiang

C-isotope analysis of the carbonates in the Upper Neoproterozoic in Keping, Xinjiang indicates that the Qigebrak Formation and the Upper Sugaitbrak Formation mainly record positive C-isotope values, and a distinct positive excursion occurs in the lower part of the Qigebrak Formation. There are three negative excursions in the boundary between the Qigebrak Formation and the Cambrian, the uppermost and lowermost Upper Sugaitbrak Formation. These characters resemble those of the Upper Neoproterozoic in the Three-Gorge area, which suggests that the Upper Sugaitbrak Formation and Qigebrak Formation can be correlated with the middle and upper parts of the Doushantuo Formation and Dengying Formation, respectively. The negative excursion at the top of the Upper Sugaitbrak Formation corresponds to that at the top of the Doushantuo Formation, while the negative excursion at the bottom of the Sugaitbrak Formation can be correlated with that at the middle part of the Doushantuo Formation in the Three-Gorge area and that at the top of the Hangelchaok diamictites in the Quruqtagh area.     

Solvent effects on photophysical properties of copper and zinc porphyrins

The photophysics of Zn（tetraphenylporphyrin,TPP）, Zn（tetra-2,4,6-trimethylphenyl porphyrin, TMP）, Zn （tetra-（o-dichlorophenyl） porphyrin, TPPCI8）, Cu（tetraphenylporphyrin,TPP）, Cu（tetra-2,4,6-trimethyl- phenyl porphyrin,TMP）, and Cu（tetra-（o-dichlorophenyl） porphyrin, TPPCIE, TPPCI8） in several solvents have been investigated on steady state and time-resolved spectroscopy. The Cu（TPPCI8 ） is normal and shows no evidence of CT transition in the visible or near UV regions in nonpolar solvent. However, Cu（TPPCI8）shows a blue shift in the absorption spectrum and intramolecular CT bands at absorption spectra in polar solvent, which shows a fluorescence maximum emission at 650 nm and 8.4 ns lifetime. The reason can be attributed to two points. Firstly, the increase of solvent polarity can enlarge outer reorganisational energy, which is favorable to reduce the activation free energy of charger-transfer transition based on Marcus theory of electron transfer. Moreover, the internal heavy-atom effect on Cu（TPPCIE） is encouraging to stabilize the 2T1 state also, which increases the possibility of population to CT band from 2T1 state. This result is in accord with an earlier estimate of a 10 ns lifetime and CT absorption at 640 nm bands for the CT state of Cu （11） octethylporphyrins. Other possible reasons arousing unusual fluorescence like H-bonding, axial ligands, molecular aggregation are excluded.