High-performance flexural fatigue of carbon nanotube yarns

Carbon nanotube yarns （CNTY） possess good specific strength and specific conductivity. As such, their potential for commercial applications is significant. Fatigue performance is a significant consideration in yarn/wire applications. In this study, the flexural fatigue performance of CNTY spun from super-aligned carbon nanotube arrays was investigated using a reversed bending test. The results showed that CNTY exhibited excellent resistance to pure flexural fatigue, significantly outperforming stainless steel wire; CNTY failed where a combination of flexural fatigue and tension-tension fatigue had special hollow fracture morphology, and CNTY resistance remained fundamentally unchanged in the combination fatigue process.     

Parameter estimation for dual-rate sampled Hammerstein systems with dead-zone nonlinearity

The identification of nonlinear systems with multiple sampled rates is a difficult task.The motivation of our paper is to study the parameter estimation problem of Hammerstein systems with dead-zone characteristics by using the dual-rate sampled data.Firstly,the auxiliary model identification principle is used to estimate the unmeasurable variables,and the recursive estimation algorithm is proposed to identify the parameters of the static nonlinear model with the dead-zone function and the parameters of the dynamic linear system model.Then,the convergence of the proposed identification algorithm is analyzed by using the martingale convergence theorem.It is proved theoretically that the estimated parameters can converge to the real values under the condition of continuous excitation.Finally,the validity of the proposed algorithm is proved by the identification of the dual-rate sampled nonlinear systems.     

基于沉积数值模拟的辫状河心滩演化

选取黄骅坳陷新近系典型辫状河沉积解剖区,利用密井网区动静态资料相结合识别和刻画心滩及其内部结构,在此基础上通过沉积数值模拟探究研究区心滩形成过程,并建立研究区心滩顺流迁移和横向迁移演化模式。结果表明:顺流加积、垂向加积、侧向加积和侵蚀作用共同塑造心滩的形态和内部结构;滩头侵蚀、滩尾顺流加积和垂向加积形成了心滩的顺流生长和垂向生长;侧向加积与侵蚀作用控制心滩的不对称侧向生长过程。     

Effect of Zn addition on microstructure and mechanical properties of an Al–Mg–Si alloy

In the present work, an Al–0.66Mg–0.85Si–0.2Cu alloy with Zn addition was investigated by electron back scattering diffraction(EBSD), high resolution electron microscopy(HREM), tensile and Erichsen tests. The mechanical properties of the alloy after pre-aging met the standards of sheet forming. After paint baking, the yield strength of the alloy was improved apparently. GP(Ⅱ) zones and η’phases were formed during aging process due to Zn addition. With the precipitation of GP zones, β″ phases, GP(Ⅱ) zones and η’phases, the alloys displayed excellent mechanical properties.     

Isogeometric Analysis-Based Topological Optimization for Heterogeneous Parametric Porous Structures

Porous structures widely exist in nature and artifacts, which can be exploited to reduce structural weight and material usage or improve damage tolerance and energy absorption. In this study,the authors develop an approach to design optimized porous structures with Triply Periodic Minimal Surfaces(TPMSs) in the framework of isogeometric analysis(IGA)-based topological optimization.In the developed method, by controlling the density distribution, the designed porous structures can achieve the opt...     

布尔代数的I-V模糊子代数

研究了布尔代数的I-V(Interval valued)模糊子代数及其相关性质,推广了相关文献中布尔代数的模糊子代数的结果。首先,通过将I-V模糊集应用于布尔代数,定义了布尔代数的I-V模糊子代数的概念,得到了布尔代数的I-V模糊子代数的两个简化判定定理;然后,讨论了布尔代数的I-V模糊子代数与(模糊)子代数之间的关系,证明了布尔代数上的I-V模糊集是I-V模糊子代数的充要条件是I-V模糊集的截集是布尔代数的子代数,布尔代数上的I-V模糊集是I-V模糊子代数的充要条件是I-V模糊集的上下隶属函数均为布尔代数的模糊子代数;其次,讨论了布尔代数的I-V模糊子代数的交、同态等性质,证明了布尔代数的I-V模糊子代数的交、同态像和同态逆像等也是布尔代数的I-V模糊子代数;最后,讨论了布尔代数直积上的I-V模糊子代数。
     

孔庄煤矿太原群四灰赋水规律研究

本文分析了孔庄煤矿太原群四灰水害情况的主要水文地质工程方法,总结了四灰水害特征及赋水规律,提出了防止四灰突水的具体措施和建议,对煤矿水害防治具有重要的理论和实践意义。     

文章世所希——晏殊之赋研究

北宋前期政坛、文坛领袖之一的晏殊常常仅被当作一个＂北宋倚声家之初祖＂的词人;其实晏殊残留下来的几篇赋体文章在铺陈、骈俪方面的艺术形式十分精美,颇具悠游富贵气象,鲜明具体的表现了北宋前期文坛学习李商隐骈文的情况。     

层次化的片上网络设计方法

半导体技术的发展以及系统芯片应用复杂度的不断增长,使得片上互连结构的吞吐量、功耗、信号完整性、延迟以及时钟同步等问题更加复杂,出现了以片上网络为核心的通信结构.由于系统芯片结构和片上通信的固有特性,从提高通信性能和降低硬件开销的角度进行层次化片上网络的设计对系统芯片的发展具有重要意义.本文提出了层次化的片上网络设计方法,根据实现工艺和应用需求,进行层次划分,产生若干个IP子集(将这个子集称为"簇"),按照簇间的通信需求进行片上网络的设计.实验表明,采用层次化的片上网络设计方法,能够有效提高系统性能,降低硬件实现的开销,同时满足一定的服务质量要求.