相空间重构中嵌入维和时间延迟的选择

提出了一种用于相空间重构的嵌入维和时间延迟自动算法，它利用混沌时间序列的去偏复自相关函数的零点来确定时间延迟，有效地降低了平均位移法跟踪平均位移量斜率变化的随意性所造成的计算误差，并借助于复自相关法和Г-test的迭代计算求得准最佳的嵌入维和时间延迟参数．该算法具有较充分的理论依据，其计算复杂度不大，对数据长度的依赖性不强．仿真实验结果表明，用该算法计算标准混沌时间序列关联维的相对误差由传统算法的4．4％降低到1．06％，有效地提高了计算相空间重构中不变量的精度．     

离合器分离杠杆受力研究

传统上认为：只要离合器分离杠杆的质心在过分离杠杆销轴轴线的平面内，当离合器旋转时，分离杠杆将不产生绕其转轴转动的力矩：若质心偏向哪一侧，则将产生向该侧转动的力矩。本文证明该观点是错误的，同时对分离杠杆进行了受力分析。并以泰山…650拖拉机为例进行了讨论。     

CO adsorption on electrode of Pt nanoparticles investigated by cyclic voltammetry and <Emphasis Type="Italic">in situ</Emphasis> FTIR spectroscopy

Pt nanoparticles were prepared by the chemical reduction method.The average diameter of Pt nanoparticles was determined to be 2.5nm by TEM.The electrochemical propertis of Pt nanoparticles were studied by cyclic voltammetry,In comparison with massive Pt,the oxidation current peak of CO adsorbed on Pt nanoparticles in broader.Twin adsorbates of CO on Pt nanoparticles were determined by in situ FTIRS for the first time.It has revealed that the linear and twin-bonded CO can be converted into bridge-bonded CO with the variation of electrode potential.A series of special properties of Pt nanoparticles,such as enhanced IR absorption of CO adsorbates,were also observed.     

Al-Cu-Fe-Zn系准晶的形成规律研究

本文通过快速冷凝方法制得了Al-Cu-Fe-Zn系合金粉末。这种快冷合金粉末在室温下为准晶相和晶态相共存结构,当把粉末加热到773K左右时,晶态相开始消失并且转变为准晶相,加热到1000K晶态相基本上完全转变为准晶相,继续升温准晶相又逐渐减少,晶态相重新产生和增加。本文对Al-Cu-Fe-Zn系快冷合金粉末的加热相变、准晶形成规律、准晶的成分范围进行了详细的研究。     

高效液相色谱法在中草药鞣质及多酚类研究中的应用

分析了高效液相色谱法在中草药鞣质及多酚类成分研究中的应用,判断鞣质分子的大小,判断各组分纯度及 α、β －异构体;判断鞣质水解进行的程度及定性定量分析。方法简便、快速、准确、实用性强。     

Comparison of reduction disintegration characteristics of TiO2-rich burdens prepared with sintering process and composite agglomeration process

To reveal the impact of the composite agglomeration process (CAP) on the reduction disintegration properties of TiO2-rich iron-making burden for a blast furnace, the reduction disintegration indices (RDIs), mineral constituents, and microstructure of the products pre-pared by the CAP and the traditional sintering process (TSP) were investigated. The results showed that, compared to the sinter with a ba-sicity of 2.0 prepared by the TSP, the RDI+6.3 and the RDI+3.15 of the CAP product with the same basicity increased by 28.2wt%and 13.7wt%, respectively, whereas the RDI?0.5 decreased by 2.7wt%. The analysis of the mineral constituents and microstructure of the products indicated that the decreasing titanohematite content decreased the volume expansion during reduction. Meanwhile, the decreasing perovskite content decreased its detrimental effect on the reduction disintegration properties. In addition, the higher silicoferrite of calcium and aluminum (SFCA) content improved the strength of the CAP product. Together, these factors result in an improvement of the RDI of the CAP products. In addition, compared to the sinter, the reduced CAP products clearly contained fewer cracks, which also led to mitigation of reduction disintegration.     

二阶微分包含的边值问题及其应用

在可分的Banach空间中,讨论了一类二阶微分包含的边值问题和一类反馈控制问题.结合不动点定理,对解的存在性和状态控制对的存在性分别给出了充分性条件.     

DK─ⅡA型扭振监测系统

介绍了清华大学热能工程系动力工程及控制实验室研制的ＤＫ－ⅡＡ型扭振监测系统，主要用于大型汽轮发电机组轴系扭振的监测。该系统采用“脉冲时序法”的原理，在齿形盘附近安装非接触式传感器。在传感器信号进入计算机之前，采用了一种独特的数字化处理方法，没有采用Ａ／Ｄ转换器，从而提高了测量精度。系统的测角分辨率为０．００１８°，精度可达０．０１°，而且成本较低。该系统已安装在宁夏大武口发电厂并用于扭振的实时监测     

PKI/CA技术的起源、现状和前景综述

随着网络技术的发展，网络安全问题越来越受关注，公开密钥基础设施(PKI)技术为全面解决网络安全问题提供了可行方案。各国政府先后提出了自己的PKI体系统结构及其工作原理。回顾了PKI／CA技术的起源，分析了PKI／CA的基本原理，阐述了PKI／CA的国内外应用现状及其应用前景，并描述了PKI领域存在的问题。