小议堆石坝填筑施工质量GPS监控技术

近年来,随着高面板堆石坝施工质量的要求越来越高,作为企业,必须采取一切措施,来应对市场,适应环境的变化,为此,大多数企业采用分析质量管理参数和依托技术,提出了堆石坝填筑施工质量GPS(全球定位系统)实时监控系统,这是以全球卫星定位系统为基础的,这一技术的实施与运用,为堆石坝施工技术开辟了新的发展道路,为此,本文将对此技术做一些初步的相关分析,以便为工程施工提供指导作用。     

基于等离子体的GTS模型气动减阻研究

为探究等离子体对类厢式货车的气动减阻效果,以GTS模型为研究对象,采用数值仿真的方法,分别研究了当来流风速为20 m/s时,3个位置处等离子体布置角度、激励电压对GTS模型的气动减阻效果并分析其减阻机理,然后进行组合工况的分析.研究结果表明,等离子体是通过诱导近壁面气体定向流动使流动分离点后移、推迟流动的分离,从而减小GTS模型前后压差阻力、降低整车气动阻力系数,等离子体布置的位置在流动分离点后方并且靠近流动分离点.单个位置激励时,等离子体布置在GTS尾部两侧时气动减阻效果最好,最大减阻率为5.09%;组合工况时最大减阻率可达6.01%.当来流风速一定时,等离子体存在最佳布置角度与激励电压.     

重加工具有退化与学习现象的单机批排序问题

本文对同一台机器下次品工件可重加工生产的问题进行研究。工件要求成批加工,每批包括连续加工的两个子批。第一子批的工件加工后,一部分工件是按照要求得到的优良品,另一部分工件是次品。次品的工件接着在第二子批重加工,而次品工件在等待重加工时会产生退化与学习现象,加工完成后得到的工件是优良品。同一子批的工件同时完工,工件的完工时间是该子批中最后一个工件的完工时间。假设每批生产的工件次品率是相同的。每一批工件开始加工和重加工时都有安装时间。目标函数是使总安装时间,重加工和库存持续费用最小,并且优良品工件的需求得到满足。对于该问题的一般情形给出了动态规划算法。接着当批工件的完工时间和批的规模满足一致关系,给出多项时间算法。
     

Physical layer impairments tolerance based lightpath provision in software defined optical network

As all-optical networks grow with ever increasing ultra-high speed, the communication quality suffers seriously from physical layer impairments ( PLIs) .The same problem still exists in software defined optical network ( SDON) controlled by OpenFlow.Aimed to solve this problem, a PLIs tol-erance based lightpath provision scheme is proposed for OpenFlow controlled optical networks.This proposed approach not only takes the OSNR model to represent those linear PLIs factors, but also in-troduces those nonlinear factors into the OSNR model.Thus, the proposed scheme is able to cover most PLIs factors of each optical link and conduct optical lightpath provison with better communica-tion quality.Moreover, PLIs tolerance model is also set up and considered in this work with some necessary extension to OpenFlow protocols to achieve better compatibility between physical layer im-pairments factors and various services connections.Simulation results show that the proposed scheme is able to get better performance in terms of packet loss rate and connection setup time.     

略谈磁性指向器的形制

司南是最早的磁性指向器.北宋时期,磁化技术的突破,导致磁性指向器的形制有了新的演变,其中,用针指向是磁性指向器形制最重要的改进.指南针的出现,极大提高了磁性指向器的指向精度,加快了磁偏现象的发现.之后,指南针的形制仍不断被改进,指南鱼发展成水罗盘,用以指向的木刻鱼被穿上小木条的磁针取代,"指南鱼"的形制消失;指南龟发展成枢轴支承式,成了旱罗盘.本文对磁性指向器的发明和演进过程稍作梳理,希望对帮助广大读者了解这一问题能够有所裨益.     

走出我国公共部门人力资源绩效考核的困境

文章从我国公共部门人力资源绩效考核面临的现实问题入手，针对现有的考核体系作了比较系统的思考，并给出了相应的建议和措施。     

Optimal multi-asset investment with no-shorting constraint under mean-variance criterion for an insurer

This paper considers the optimal investment strategy for an insurer under the criterion of mean-variance. The risk process is a compound Poisson process and the insurer can invest in a risk-free asset and multiple risky assets. This paper obtains the optimal investment policy using the stochastic linear quadratic (LQ) control theory with no-shorting constraint. Then the efficient strategy (optimal investment strategy) and efficient frontier are derived explicitly by a verification theorem with the viscosity solution of Hamilton-Jacobi-Bellman (HJB) equation.     

航空铝合金预腐蚀疲劳寿命退化规律

航空铝合金材料在服役过程中常因腐蚀损伤而导致疲劳断裂问题,通过采用扫描电镜及疲劳寿命测试等方法,研究了不同预腐蚀损伤对2xxx铝合金在不同应力比下疲劳寿命的影响,探讨了预腐蚀损伤对疲劳裂纹萌生扩展的影响机理.结果表明:预腐蚀损伤对2xxx铝合金材料疲劳寿命的影响显著,材料的疲劳性能随着腐蚀损伤程度的增加而明显下降.同时建立了预腐蚀损伤对材料疲劳极限的影响系数C-T-R模型,材料疲劳极限的影响系数C随着预腐蚀时间的增加或者应力比R的增加而变大.断口分析表明,预腐蚀损伤的存在导致裂纹萌生寿命大大缩短,裂纹萌生由单源转变为多源,并且均萌生于腐蚀坑处.     

Atomic layer deposition on Pd nanocrystals for forming Pd-TiO2 interface toward enhanced CO oxidation

Pd typically exhibits relatively low catalytic activity in CO oxidation, as CO is apt to be adsorbed on Pd to poison the surface for O2 activation. In this Letter, we report that this limitation can be overcome by integrating Pd with TiO2. The TiO2 was coated on Pd nanocubes with a controllable thickness using atomic layer deposition (ALD) method. Given the different work functions of TiO2 and Pd, the electrons in TiO2 semiconductor will flow toward Pd. With the electron density increased on Pd, the adsorption of CO to Pd will be weakened while the oxygen activation can be facilitated. Meanwhile, the interface-confined sites at Pd-TiO2 may further enhance the oxygen activation. As the species adsorption and activation are strongly correlated with electron density, the performance of Pd-TiO2 in CO oxidation turns out to depend on the TiO2 thickness, which determines the number of transferred electrons, within a certain range (<1.8 nm). This work provides a new strategy for enhancing catalytic performance through tailoring charge densities in hybrid catalysts.     

栾树不同单株种子品质差异性分析

对采自江西农业大学校园内10株栾树种子的播种品质和营养成分含量进行分析,结果表明：不同单株栾树种子发芽品质和营养物质的积累存在差异,在采种母树选择上,除种源外还要考虑单株的筛选;10个单株中,5号千粒重最重,达9.04 g,种子发芽性状及营养物质积累均处于较高水平,为10个单株中的优良单株;种子千粒重、含水量达到极显著...