基于PLC和TD400C的建筑玻璃真空镀膜生产线电气系统控制

介绍了利用S7-200 CPU226和TD400C文本显示器友好人机界面构成真空镀膜生产线控制系统的组成、特点,程序编制及在应用中注意的问题.实现了建筑玻璃真空镀膜生产过程的自动化.     

基于矢量控制变频调速系统的动态性能分析

针对无速度传感器矢量控制模式下变频调速系统,进行动态性能分析,剖析当负载变化时比例、积分增益和带宽BW对调速系统的恢复时间和动态速降的影响,通过对各项实测数据的对比分析,总结出了相应的控制规律,为探讨变频调速的动态特性优化方法提供依据.     

锂-空气电池研究进展

 锂-空气电池是通过金属锂与空气中的O₂反应产生电能,它的理论比容量高达3828mAh/g,在电动汽车等领域展现出重要的应用前景。本文综述了近年来锂-空气电池领域的最新研究进展,对有机体系、有机-水混合体系与固态体系三类锂-空气电池的结构与原理进行了分析。总结了有机体系的多孔碳空气电极、催化剂、电解液等方面的研究工作。多孔碳的孔容是决定空气电极比容量最重要的结构参数,具有高孔容的多孔碳可以为放电过程中生成的氧化锂提供更多的储存空间,从而表现出高的比容量,多孔碳的比表面积与平均孔径对比容量也有重要的影响;合适的电催化剂可以有效的降低氧还原反应与析氧反应的过电压,从而提高能量效率;具有高极性、低黏度、低吸湿性、高溶解氧的电解液有利于改善电池的相关性能。总结了有机-水混合体系的隔膜、电解液等方面的研究工作。对有机相与水相电解液均具有良好抗化学腐蚀性的超级锂离子导通玻璃膜是目前有机-水混合体系研究的关键。总结了固态体系最新的研究进展。此外,展望了锂-空气电池领域今后的发展方向。     

Evaluating the reliability of microsatellite genotyping from low-quality DNA templates with a polynomial distribution model

Molecular studies using trace DNA, such as from museum specimens, ancient or forensic samples and samples obtained noninvasively, often have a common problem of low quality of DNA templates. Amplification errors, such as allelic dropout and false allele, may arise during polymerase chain reaction (PCR) using such samples. A mathematical model which treats homozygotes and heterozygotes discriminately has been developed to measure sample quality and compute the confidence level of using multipletube approaches. We use plucked hair samples collected from 26 individual Sichuan snub-nosed monkeys (Rhinopithecus roxel- lana) to test the model. In this case, a confidence level of 99% can be achieved by three positive PCRs. If the sample quality is very poor and requires many PCR replicates, an alternative multiplestep genotyping method is recommended. This model enables researchers to optimize experimental protocols through pilot studies and obtain reliable genetic information using noninvasive sampling method.     

Aero-optical wavefront measurement technique based on BOS and its applications

A collimated light beam will be refracted if it propagates through a flow-field with index-of-refraction variations,and its wavefront will be distorted.If we measure the deflection angle of the light beam,the gradient of the wavefront can be obtained using the Malus law,and the wavefront aberration can be computed with a reconstruction algorithm.Two characteristics of background oriented schlieren(BOS) are conducive to wavefront aberration measurement:BOS can be used to measure the deflection angle of a light beam by measuring the displacement field between the reference image and the experiment image.Moreover,in a BOS system of Schlieren mode,only the ray perpendicular to the background image can be captured with a camera.This is helpful to measure wavefront aberrations that occur after a planar wavefront has passed through the flow-field.Based on these characteristics of BOS of Schlieren mode,a new wavefront measurement technique,which is called the BOS-based wavefront technique(BOS-WT),is proposed in this paper.It works by constructing the relationship between the displacement of the background image and the aero-optical wavefront gradient and uses the Southwell wavefront reconstruction algorithm.A BOS-WT system was assembled,and its temporal resolution was found to be 6 ns,and its temporal-correlation resolution reached 0.2 μs.A BOS-WT can measure the time-correlation transient wavefront quantitatively.It is simple and easy to operate.In this paper,we also present a study of the aero-optical performance of supersonic mixing layer based on our BOS-WT transient wavefronts at an interval of 5 μs.The results showed the wavefront was transient and distorted after it had passed through the mixing layer.Through the analysis of the data at the 5 μs interval,the temporal evolution of wavefront can be obtained.     

Improved acetone sensing properties of flat sensors based on Co-SnO2 composite nanofibers

Co-SnO2 composite nanofibers were synthesized by an electrospinning method and characterized by X-ray diffraction, field emission scanning electron microscopy, and transmission electron microscopy. Gas sensors were fabricated by spinning these nanofibers onto flat ceramic substrates, which had signal electrodes and heaters on their top and bottom surfaces, respectively. Compared with sensors loaded with pure SnO2 nanofibers, the Co-SnO2 nanofiber sensors exhibited improved acetone sensing properties with high selectivity and rapid response and recovery times. The response was 33 when the sensors were exposed to 100 μL/L acetone at 330°C, and the corresponding response with 100 μL/L of ethanol was only 6. The response and recovery times to acetone were about 5 and 8 s, respectively. These results indicate Co-SnO2 composite nanofibers are good candidates for fabrication of high performance acetone sensors for practical application.     

Carbon and hydrogen isotopic compositions and their evolutions of gases generated by herbaceous swamp peat at different thermal maturity stages

Coalbed methane (CBM) accumulation models include continuous gas accumulation and staged gas accumulation.However,studied on the geochemical characteristics and indices to evaluate staged accumulation CBM are lacking.This study for the first time obtained the carbon and hydrogen isotopic compositions of methane and ethane generated at different evolution stages using thermal simulation of samples prepared by treating an herbaceous swamp peat at different temperatures.The results showed that the carbon isotopic compositions of methane and ethane were obviously affected by the thermal evolution level of the starting sample,while the hydrogen isotopic compositions were closely related to the maturity of gases.The carbon and hydrogen isotopic compositions of gases generated by coal-forming organic matter with Ro values from 1.2%,1.7%,2.4%,3.2% and 3.7% to 5.2% were determinated.The relationship between Ro values and the carbon and hydrogen isotopic compositions of gases generated by coal-forming organic matter at different evolution stages as well as the carbon or hydrogen isotopic relationships between methane and ethane were established.The results provide a scientific basis for studying the genesis of CBM generated at different maturity intervals and understanding the geochemical characteristics of staged accumulation CBM.These results were applied to a case study on CBM from the southern Qinshui basin,and it was found that the CBM accumulated after the Middle Jurassic and was characteristic of staged gas accumulation.This is consistent with the result of geological studies,and further showed that the results of thermal simulation experiments are very important for evaluating the genesis of natural CBM.     

K2O对氧化物原料合成Al8B4C7的影响

采用硼砂、金属铝和碳粉为原料一步合成Al8B4C7.在合成过程中掺入不同含量的K2O,研究杂质K2O对合成Al8B4C7的影响.将原料混合均匀,在200MPa的压力下压制成φ20mm×20mm的圆柱型试样,将干燥后的试样在不同温度下的流动氩气气氛中进行合成.利用化学分析、XRD和SEM等分析测试技术,研究了K2O含量以及烧结温度对反应合成材料物相组成和显微结构的影响.结果表明:尽管加入不同含量的K2O,但其高温烧结反应后,若K2O的质量分数在0.019%～0.028%之间,就不出现含K的新相.K2O的加入不利于Al8B4C7的合成,它可将Al8B4C7的开始生成温度提升至1 400℃,而且1 700℃时,Al8B4C7含量较不加入K2O时明显减少.添加K2O合成的Al8B4C7为1μm左右大小的无规则小颗粒.     

基于粒计算的商业数据流概念漂移特征选择

商业数据流具有动态性、漂移性等特性,概念漂移特征选择是数据流挖掘的重要工作之一.本文从数据流的特点和概念漂移特性出发,提出了数据流的概念形式化分析流程和基于粒计算构建数据流的概念形式化描述模型;商业数据流的概念漂移实际上取决于其概念外延的变化,文中使用包括外延偶合度和内涵偶合度在内的概念偶合度来描述概念间的相似性;经过粒化的数据流由概念格来表示,进而通过概念格对的松弛偶合度来分析数据流特征;结合概念偶合分析和数据流变化特征,阐述了一种基于数据流概念格对的松弛匹配偶合度算法,并据此分析概念格对来选择数据流的漂移特征.通过实例验证、评价了特征选择,证明其有效性.     

三维地学建模技术与Kriging方法在固体矿产储量计算中的应用

结合Kriging方法在计算机上的实现和应用,介绍了运用三维地学建模技术生成矿体的三维品位模型的原理流程以及关键技术,并在此基础上进行矿产资源储最计算.其基本流程为:根据实际地质勘探数据生成矿体三维实体模型;在实体tin模型内部应用块模型方法进行划分,建立矿体块体模型;利用Kriging方法进行插值,生成矿体的品位模型...