激光开槽、埋槽电极硅太阳电池

报道一种新颖的激光开槽、埋槽电极硅太阳电池的结构、工艺流程及其研制结果。在ＡＭ１．５，２５℃，１００ｍＷ／ｃｍ２的条件下，以面积为４５ｃｍ３的３６片硅片研制的硅太阳电池的输出参数的平均值为ＪＳＣ＝３６．１ｍＡ／ｃｍ２，Ｖ∞＝６３３ｍＶ，Ｆ．Ｆ．＝０．７９８，η＝１８．２３％，最后分析了种高性能硅太阳电池的设计特点。     

Non-Minimum Phase Nonlinear System Predictive Control Based on Local Recurrent Neural Networks

Abstract: After a recursive multi-step-ahead predictor for nonlinear systems based on local recurrent neural networks isintroduced, an intelligent PID controller is adopted to correct the errors including identified model errors and accumulatederrors produced in the recursive process. Characterized by predictive control, this method can achieve a good controlaccuracy and has good robustness. A simulation study shows that this control algorithm is very effective.     

Dynamic Characteristics of Inter-Satellite Links in LEO Networks

To establish an efficient inter-satellite link (ISL) in an LEO network, the effect of geometric characteristics of ISL on the ISLs and the devices on the LEO satellite should be examined. Because of the continuous movement of the LEO satellite, the time-varying behaviours of the ISL's geometric charactersistics continuously change with the changes of the satellite's position on the orbit. These dynamic geometric characteristics of the ISLs are important for ISL's performance analyzing and the design of the devices on the LEO satellite. This paper describes dynamic geometric characteristics of ISL, analyzes the impact of these regulations on the tracking system of the satellite's antenna and the power adjusting system of the satellite's transmitter, with the Iridium system as an example.     

Radar Imaging Based on Iterative Algorithms

It has long been realized that the problem of radar imaging is a special case of image reconstruction in which the data are incomplete and noisy. In other fields, iterative reconstruction algorithms have been used successfully to improve the image quality. This paper studies the application of iterative algorithms in radar imaging. A discrete model is first derived, and the iterative algorithms are then adapted to radar imaging. Although such algorithms are usually time consuming, this paper shows that, if the algorithms are appropriately simplified, it is possible to realize them even in real time. The efficiency of iterative algorithms is shown through computer simulations.     

大型喷浆机器人的灵巧度分析

灵巧度是衡量机器人运动失真程度的重要参数。对机器人灵巧度评价指标进行了对比研究 ,结合大型喷浆机器人自由度较多的特点 ,用雅可比矩阵的条件数对喷浆机器人的灵巧度进行了分析。结果表明 ,大型喷浆机器人在不同形位下的条件数都很小 ,具有较好的运动灵巧度。     

在UBBE框架下考虑不肯定的上界的估计方法

对目前的ＵＢＢＥ模型进行了适当的推广，使在解决估计问题时可以考虑那些可能是误差上界的数值，并在此基础上提出了一种方法，能够通过对估计精度和可靠性进行合理的权衡确定所需估计值，实际案例研究结果表明所提方法能够较好地解决估计精度和可靠性之间的矛盾。     

Face Recognition Based on Support Vector Machine and Nearest Neighbor Classifier

Support vector machine (SVM), as a novel approach in pattern recognition, has demonstrated a success in face detection and face recognition. In this paper, a face recognition approach based on the SVM classifier with the nearest neighbor classifier (NNC) is proposed. The principal component analysis (PCA) is used to reduce the dimension and extract features. Then one-against-all stratedy is used to train the SVM classifiers. At the testing stage, we propose an al-     

脉动流诱发有附着物的板振分析

利用压气机与脉动流发生装置，变流体成脉动流注入到工程中的板壳结构上，使其固体结构部分在脉动流的作用下产生强迫振动，这对工业上分离板壳结构表面固体附着物很有实际意义，以薄板为研究对象，导出了薄板横向振动即弯曲振动微分方程，并着重从理论上分析了分离其上的固体附着物的条件及其各种影响因素。     

20#管线钢在役焊接HAZ的组织与性能研究

在役焊接过程中，管内流动介质的快速冷却，易使接头出现氢致裂纹。对20^#管线钢在不同冷却条件和不同焊接线能量下的HAZ的组织性能进行了模拟研究。结果表明，在流动水冷却下，HAZ出现较多的贝氏体、马氏体和MA组元等不平衡组织，使得HAZ的硬度高达330HvN5，性能最差。采用大的线能量焊接，形成较多的上贝氏体和粒状贝氏体组织，对改善接头性能有利。因此，在避免烧穿的前提下增大焊接线能量或减小管内介质的冷却能力，减少高硬度不平衡相的形成，可以降低HAZ氢致开裂敏感性。     

视频汇流环的设计与研究

作者在文献[1]中从理论上阐明了视频汇流环的小型化设计。本文着重介绍视频汇流环的电器设计和它的测试方法。