大型工件表面电火花刻字技术

叙述了大型工件表面刻字的有关技术和方法，从经济和技术的角度分析了用电火花加工方法进行大型工件表面刻字的原因。根据电火花加工原理和大型工件表面刻字特点提出了大型工件表面电火花刻字的技术方案。该技术方案以小型电火花机床的主轴头和电源控制柜为基础，重点研究了总体结构、电极与工件之间的三坐标移动、电极精确定位、工作液循环系统等关键技术。简要介绍了为某大型钢铁企业研制的大型轧辊电火花刻字专用机床。现场应用情况表明，该技术方案经济实用，该专用机床稳定可靠。     

40Cr与QCrO．5的恒温超塑性固态焊接

基于对40Cr表面激光淬火后与QCr0.5恒温超塑性固态焊接可行性的分析,在非真空、无保护气氛下,进行了40Cr QCr0.5的异材焊接工艺试验。试验结果表明,40Cr钢待焊接面经激光淬火预处理后与QCr0.5在预压应力56.6～84.9MPa、焊接温度750～800℃、初始应变速率(2.5～7.5)×10-4s-1的条件下,经120～180s短时压接,即可实现固态焊接,接头强度可达QCr0.5母材强度,胀大率不超过6%。焊接过程中QCr0.5发生了超塑性流变,40Cr变形甚微。     

Measurements of leucocyte membrane elasticity based on the optical tweezers

A 1-μm in diameter polystyrene bead coated with lectin is trapped by optical tweezers whics is formed by a focused laser beam (740nm).A leucocyte adhered to the bottom of sample cell is chosen to close to the trapped bead.When their stable combination is confirmed,the leucocyte is displaced by moving the sample stage.A“tether”is then formed between the trapped bead and the membrane.The force acting on the tether is measured by a detector equipped on the optical tweezers system.The deformation of the membrane is diverse in different contact conditions.When the contact area is small,the tether is very thin and the force on it is 7.4pN(10^-12N),while the tether is much thicker under a larger contact area and its corresponding force is about 14pN.It is presumed that the latter is related to the deformation of cytoskeleton.     

A complete sequence and comparative analysis of a SARS-associated virus(Isolate BJ01)

Severe Acute Respiratory Syndrome (SARS) is a newly identified infectious disease[1—5]. The global outbreak of SARS has been threatening the health of people worldwide and has killed 353 people and infected more than 5462 in 27 countries, as reported by WHO on April 29, 2003 (http://www.who.int/csr/sarscountry/en). Although it has been recognized that a variant of virus from the family of coronavirus might be the candidate pathogen of SARS[1—5], its identity as the unique pathogen sti…     

金属基体表面热熔敷玻璃涂层耐蚀性研究

利用斑点试验、点蚀试验、电化学测试及扫描电镜等方法 ,研究了熔敷温度、保温时间和稀土添加量等工艺参数对热熔敷法制备的玻璃涂层耐蚀性的影响 ,探讨了添加稀土提高玻璃涂层耐蚀性的机理。试验结果表明 ,采用热熔敷法制备的玻璃涂层有较好的耐蚀性。随着熔敷温度的提高和保温时间的延长 ,形成了一定量的晶相后会降低涂层的耐蚀性。试验结果表明 ,熔敷温度为 70 0℃、保温 5min后能够得到耐蚀性良好的玻璃涂层。添加稀土提高了釉料的软化温度和熔融釉料的粘度 ,阻止了结晶形核和晶核长大 ,减少了晶相 ,同时提高了涂层的电极电位 ,使涂层耐蚀性显著提高。当稀土含量为 2 %时 ,涂层的耐蚀性较好。     

Nd isotopic characteristics of Proterozoic metasedimentary rocks and constraints on their provenance in the eastern segment of Central Tianshan Belt, Xinjiang

Sm-Nd isotopic characteristics, εNd(t) values and Nd model ages (TDM) of Proterozoic metasedimentary rocks in the eastern segment of Central Tianshan Belt (ESCTB), Xinjiang, are used to constrain the sedimentary provenance as well as to evaluate their tectonic implications. εNd(t) and TDM values of these samples range from -4.00 to +6.36 and from 1.29 to 2.29 Ga, respectively. These feature values are distinguished from those of Archean Tarim Craton. Their average εNd(t) values of the Weiya, the Kumishi and the south to the Dikar samples are -2.46, +2.06 and +1.37, respectively. Nd model ages of the Weiya samples vary between 1.86 and 2.29 Ga, but those of the Kumishi and the south to the Dikar samples show a significant concentration at 1.6～1.9 Ga and the youngest Nd model age is 1.29 Ga. Those Nd isotopic characteristics suggest that these metasedimentary rocks could be derived from a significant proportion of Paleoproterozoic crustal source and a participation of young arc materials, rather than Archean Tarim Craton. Furthermore, the data also indicate that these two sources were paleogeographically separated. Thus we can deduce that the Kumishi and the south to the Dikar metasedimentary rocks were formed proximal to the arc side of the back-arc basin, but the Weiya metasedimentary rocks were closer to the continental side of the back-arc basin.     

井下掺液抽稠油泵研究

通过对常规泵进行串联、改造 ,研制出了井下掺液抽稠油泵。对泵结构的可行性进行了论证 ,阐述了泵的工作原理 ,并对泵的工作参数进行了分析。该泵是通过从油管掺入液、从油套环空产出液 ,在上冲程时吸入产出液 ,在下冲程时举升混合液 ,从而实现了在柱塞下方掺液 ,避免了出现砂磨柱塞的现象 ,减少了稠油对柱塞运动的阻力 ,克服了泵上掺液不能降低进泵原油粘度的缺点 ,解决了在井筒降粘和稠油抽汲中存在的问题。该泵使用了连动式凡尔与弹簧 ,保证了底阀与顶阀打开与关闭的同步性 ,能够达到吸入产出液、加入掺入液以及举升混合液同时进行的目的。该泵的设计原理可行 ,工艺容易实现 ,是一种理想的新型抽稠油泵。     

桥梁健康监测中的损伤特征提取与异常诊断

针对桥梁健康监测的应用 ,提出了一种基于统计模式识别技术的结构异常诊断方法 .由正常结构实时监测动态响应形成状态判断的数据基 ,通过序列相似分析将未知状态结构的响应信号与正常结构数据基进行环境/运营条件归一化 ;然后根据动态参数模型残差分析提取结构损伤特征 ,进而通过统计分析进行结构异常诊断和损伤定位 .与基于模态频率变化的方法相比 ,该方法具有更高的损伤识别能力 ,并能较好地克服实测数据离散性和环境与运营条件影响带来的困难 .通过三跨连续梁的数值试验验证了该方法的有效性     

采用贫混凝土基层的水泥混凝土路面厚度优化

采用贫混凝土基层的水泥混凝土路面是解决重载交通的一种理想路面形式。贫混凝土基层与水泥混凝土面层的不同厚度组合会对路面荷载应力产生较大的影响,考虑实际路面的各种要求,提出了厚度优化的数学模型。利用三维有限元模型,根据在不同结构形式下的合理目标函数,分析了最佳的厚度组合比。     

小波变换在检测粘接件信号特征中的应用

在对金属与非金属粘接件性能检测的分析处理中，应用小波变换的方法对这种非平稳过程的信号进行分析，有效提取了性能检测所需要的特征参数，为提高金属与非金属粘接件性能检测的准确率和效率奠定了基础。