40Cr与QCrO．5的恒温超塑性固态焊接

基于对40Cr表面激光淬火后与QCr0.5恒温超塑性固态焊接可行性的分析,在非真空、无保护气氛下,进行了40Cr QCr0.5的异材焊接工艺试验。试验结果表明,40Cr钢待焊接面经激光淬火预处理后与QCr0.5在预压应力56.6～84.9MPa、焊接温度750～800℃、初始应变速率(2.5～7.5)×10-4s-1的条件下,经120～180s短时压接,即可实现固态焊接,接头强度可达QCr0.5母材强度,胀大率不超过6%。焊接过程中QCr0.5发生了超塑性流变,40Cr变形甚微。     

Measurements of leucocyte membrane elasticity based on the optical tweezers

A 1-μm in diameter polystyrene bead coated with lectin is trapped by optical tweezers whics is formed by a focused laser beam (740nm).A leucocyte adhered to the bottom of sample cell is chosen to close to the trapped bead.When their stable combination is confirmed,the leucocyte is displaced by moving the sample stage.A“tether”is then formed between the trapped bead and the membrane.The force acting on the tether is measured by a detector equipped on the optical tweezers system.The deformation of the membrane is diverse in different contact conditions.When the contact area is small,the tether is very thin and the force on it is 7.4pN(10^-12N),while the tether is much thicker under a larger contact area and its corresponding force is about 14pN.It is presumed that the latter is related to the deformation of cytoskeleton.     

A complete sequence and comparative analysis of a SARS-associated virus(Isolate BJ01)

Severe Acute Respiratory Syndrome (SARS) is a newly identified infectious disease[1—5]. The global outbreak of SARS has been threatening the health of people worldwide and has killed 353 people and infected more than 5462 in 27 countries, as reported by WHO on April 29, 2003 (http://www.who.int/csr/sarscountry/en). Although it has been recognized that a variant of virus from the family of coronavirus might be the candidate pathogen of SARS[1—5], its identity as the unique pathogen sti…     

金属基体表面热熔敷玻璃涂层耐蚀性研究

利用斑点试验、点蚀试验、电化学测试及扫描电镜等方法 ,研究了熔敷温度、保温时间和稀土添加量等工艺参数对热熔敷法制备的玻璃涂层耐蚀性的影响 ,探讨了添加稀土提高玻璃涂层耐蚀性的机理。试验结果表明 ,采用热熔敷法制备的玻璃涂层有较好的耐蚀性。随着熔敷温度的提高和保温时间的延长 ,形成了一定量的晶相后会降低涂层的耐蚀性。试验结果表明 ,熔敷温度为 70 0℃、保温 5min后能够得到耐蚀性良好的玻璃涂层。添加稀土提高了釉料的软化温度和熔融釉料的粘度 ,阻止了结晶形核和晶核长大 ,减少了晶相 ,同时提高了涂层的电极电位 ,使涂层耐蚀性显著提高。当稀土含量为 2 %时 ,涂层的耐蚀性较好。     

Nd isotopic characteristics of Proterozoic metasedimentary rocks and constraints on their provenance in the eastern segment of Central Tianshan Belt, Xinjiang

Sm-Nd isotopic characteristics, εNd(t) values and Nd model ages (TDM) of Proterozoic metasedimentary rocks in the eastern segment of Central Tianshan Belt (ESCTB), Xinjiang, are used to constrain the sedimentary provenance as well as to evaluate their tectonic implications. εNd(t) and TDM values of these samples range from -4.00 to +6.36 and from 1.29 to 2.29 Ga, respectively. These feature values are distinguished from those of Archean Tarim Craton. Their average εNd(t) values of the Weiya, the Kumishi and the south to the Dikar samples are -2.46, +2.06 and +1.37, respectively. Nd model ages of the Weiya samples vary between 1.86 and 2.29 Ga, but those of the Kumishi and the south to the Dikar samples show a significant concentration at 1.6～1.9 Ga and the youngest Nd model age is 1.29 Ga. Those Nd isotopic characteristics suggest that these metasedimentary rocks could be derived from a significant proportion of Paleoproterozoic crustal source and a participation of young arc materials, rather than Archean Tarim Craton. Furthermore, the data also indicate that these two sources were paleogeographically separated. Thus we can deduce that the Kumishi and the south to the Dikar metasedimentary rocks were formed proximal to the arc side of the back-arc basin, but the Weiya metasedimentary rocks were closer to the continental side of the back-arc basin.     

M_2Cl_4(PH_3)_4(M=Cr、Mo、W)分子的DFT计算

采用密度泛函理论(DFT)研究M_2Cl_4(PH_3)_4(M=Cr、Mo、W)分子,在D_(2d)对称约束下进行结构优化和能量解析,三种化合物的M—M键长分别是C—Cr1.737A,Mo—Mo2.157A,W—W2.286A.能量解析表明:E_(Cr—Cr)相似文献   

兰州北山生物结皮中陆生藻种类组成与群落结构

通过对沙井驿、刘家堡、九州台、白塔山、小牛圈沟等样点采集的生物结皮样的培养和鉴定 ,研究了兰州市北山生物结皮中陆生藻种类组成及其群落结构 .结果发现 ,该地陆生藻共计 5 3种 ,其中蓝藻 34种 ,绿藻 7种 ,硅藻10种 ,裸藻 2种 .蓝藻中以丝状种类占优势 (6 5 % ) ,绿藻中仍以球状种类居多 (5 7% ) ,但也有不少丝状个体(43% ) .黄土结皮以非洲席藻为第一优势种 ,石崖表具鞘微鞘藻占绝对优势 ,人工草丛中小球藻最丰富 ;种类数在砾质黄土中最多 (2 3) ,黄粘土中最少 (16 ) .     

采用贫混凝土基层的水泥混凝土路面厚度优化

采用贫混凝土基层的水泥混凝土路面是解决重载交通的一种理想路面形式。贫混凝土基层与水泥混凝土面层的不同厚度组合会对路面荷载应力产生较大的影响,考虑实际路面的各种要求,提出了厚度优化的数学模型。利用三维有限元模型,根据在不同结构形式下的合理目标函数,分析了最佳的厚度组合比。     

基于项目计划与协调的网络联盟制造系统

网络联盟制造作为一种新的制造模式 ,引起了企业界和学术界的广泛关注 .故从基于项目计划与协调的网络联盟制造系统的主要思想和重要特征出发 ,推导出基于项目计划与协调的网络联盟制造系统的概念模型和信息模型 ;通过已开发的原型系统 ,验证其可行性和先进性     

纳米TiO2的制备及光催化性能

采用RF-PCVD法，以TiCl4 O2为反应体系，制备出了球状纳米级TiO2粉体。经TEM，XRD，BET测试表明，粉体为锐钛型金红石型的混晶体，粒径范围为20-60nm，平均粒径45nm。苯酚降解实验表明，TiO2粉体具有明显的光催化活性，并就光催化效率与德国产TiO2进行了比较。