Ni/硅胶催化剂的制备及其对油脂氢化反应的催化作用

用共沉淀法制得了一种用于油脂氢化反应的Ni/硅胶催化剂,该催化剂具有较好的活性及稳定性,220℃下,加氢精炼油6小时,产物熔点可达39℃。反应10小时时,催化剂的活性仍能稳定不变。     

分布式数据库辅助设计工具SUNDDBA

本文较详细地介绍了ＳＵＮＤＤＢＡ的设计与实现，并以此为例，对分布式数据库设计中的一些主要问题诸如水平分割、垂直分割、代价估算及数据分布等进行了讨论。     

扁平疣种植术、左旋咪唑、潘生丁治疗扁平疣疗效观察

目的：观察扁平疣种植术、口服左旋咪唑、潘生丁治疗扁平疣的短期疗效。方法：85例扁平疣患分为治疗组、对照组，二组患均口服左旋咪唑、潘生丁片；治疗组同时取癌体种植于上臂三角肌。结果：治疗组4d开始出现疗效，总有效率86％，对照组13d开始出现疗效，总有效率48．5％，两组疗效有显差异(P＜0．01)。结论：左旋咪唑、潘生丁具有抗病毒，提高或恢复机体细胞免疫功能，调节抗体产生，同时采用扁平疣种植术，应用自体免疫疗法，通过植入疣体的抗原刺激机体产生抗体，使疣组织在短期内吸收、消失而达到短期治愈的目的。     

A Survey of Web Information Systems and Applications

0 IntroductionWiththe rapid development of Internet , more and more Webinformation systems and applications are emergingand alot of newchallenges have beenrising and some open problems needto be solvedfromthe academic andindustrial points of viewintheseresearchareas .To meet the needs of sharingandexchangingresearchachievements anddevelopment experiences fromboth academic andindustry communities ,the Office Automation and Electronic Govern-ment Society of China Computer Federation(CCF) ha…     

Simulation of dynamic recrystallization for an Al-Zn-Mg-Cu alloy using cellular automaton

A cellular automata (CA) model has been developed to predict and control the microstructure evolution during hot deformation on 7085 aluminum alloy. The initial microstructure and thermal-mechanical parameters were used as the input data of the CA model. To link microstructure evolution with macroscopic flow stress, dislocation density was set as an important internal state variable. The hot deformation behavior of 7085 aluminum alloy was studied by isothermal compression tests under a deformation temperature range of 623–723 K and a strain rate range of 0.001-1s^?1 up to true strains of 0.53–1.20. Electron backscattered diffraction technique and the CA model were utilized to systematically investigate the effects of strain, strain rate and deformation temperature on the microstructure evolution, and further to predict the average grain diameter and the recrystallization fraction after deformation. The simulated results were validated by the experimental data to demonstrate the feasibility and predictability of the CA model.     

废旧箱包逆向物流运作模式研究

随着我国经济水平不断提高以及电商时代的到来,产品更新速率加快,大量废旧物品不仅造成资源浪费现象,而且还会造成严重的环境污染.资源回收再处理问题已经成为当下的热点,逆向物流在这种环境下应运而生,选择和确定逆向物流回收模式是企业的关注重点,其中旅游箱包就是一个发展迅速而研究较少的领域,值得研究与推广.研究箱包公司物流发展对工业类企业减少成本,增加利润,提高回收运输效率等具有一定的指导意义.根据废旧箱包逆向物流结构链的特点,主要对生产商回收模式(Manufacturer Take-Back,MT)、销售商回收模(Retailer Take-Back,RT)、第三方回收模式(Third Party Take-Back,TPT)3种回收模式进行了量化对比分析,以箱包制造企业回收整体效益最高为最终目标,并运用SWOT-AHP结合的方法,对废旧箱包逆向物流回收模式进行了研究分析,构建了箱包逆向物流回收模式模型,为箱包企业逆向物流选择最佳回收模式提供了理论模型依据,得出第三方回收模式最优的结论.对箱包企业处理废旧产品工作而言具有一定参考意义.     

Dynamic response characteristic of 7N01/7A01/7050 aluminium multilayer plate at high strain rate

The correlations between the structures, fracture behavior and dynamic shear property were investigated for 7050 to 7N01 layer of 7N01/7A01/7050 multilayer plate with different thickness ratio fabricated by hot rolling bonding. is The results showed that when thickness ratio of 7050 to 7N01 layer was 1 and 7050 layer was backplane, the absorbed energy of the multilayer plate was 39% higher than that of 7050 alloy. The excellent energy absorbing ability of 7N01/7A01/7050 multilayer plate is attributed to the blunted cracks in 7A01 interlayer, the enhanced 7050 layer by decreasing of secondary cracks and the delaying dynamic failure of 7050 layer.     

循环载荷下缺口板弹塑性应变分布测定

用电测法测定了带有中心圆孔矩形铝合金（ＬＹ－１２－ＣＺ）板在循环载荷作用下横截面的弹塑性应变分布，同时测定了循环载荷下孔边应力──应变回线，弹塑性应变集中系数Ｋε和应力集中系数Ｋσ，并和四种近似公式的计算结果进行了比较。发现在循环加载情况下用电测法绘制载荷──应变回线，并根据回线出现畸变的现象，可以灵敏的检测裂纹的萌生和早期扩展。     

纯位相编码识别方法

本文提出一种纯位相编码识别方法。在光学相关器中使用一种特殊的纯位相编码滤波器,将二值化后的输出响应序列作为目标的识别代码,可以增加光学相关系统的识别能力.