Microstructural characteristics and mechanical properties of bobbin-tool friction stir welded 2024-T3 aluminum alloy

Cold-rolled 2024-T3 sheet alloy was subjected to bobbin-tool friction stir welding (BTFSW). The microstructural characteristics and mechanical properties of the nugget zone in the as-welded state were investigated. The results show that the equiaxed grain size of BTFSW 2024-T3 alloy decreases from 7.6 to 2.8 μm as the welding speed is increased from 80 to 120 mm/min; in addition, fine grains are generated in the nugget zone and the size distribution is non-uniform. All Al₂CuMg (S') precipitates dissolve into the Al matrix, whereas Mn-rich phases confirmed as T phases (Al₂₀Cu₂Mn₃, Al₆Mn, or Al₃Mn) remain unchanged. The optimized parameters for BTFSW are verified as the rotation speed of 350 r/min and the travel speed of 100 mm/min. The variations in precipitation and dislocation play more important roles than grain size in the nugget zone with respect to influencing the mechanical properties during the BTFSW process. After the BTFSW process, the fracture mode of base material 2024-T3 alloy transforms from ductile rupture to ductile-brittle mixed fracture.     

Phase transition in the subducted oceanic lithosphere and generation of the subduction zone magma

Two metamorphic processes, i.e. subsolidus dehydration and partial melting occurring in MORB, metasediments and peridotite of subducted oceanic lithosphere are discussed on the basis of available experimental work and phase equilibrium modeling. Phase diagrams of hydrous MORB show that in most cold subduction P-T （pressure-temperature） regimes a large portion of water in the basic layer has released below the onset of blueschist facies （〈 20 km）, and at a depth （60--70 km） of transition from lawsonite blueschist to lawsonite eclogite facies through glaucophane dehydration; only a smaller portion of water will escape from the slab through dehydration of lawsonite and chloritoid in the depth range suitable for arc magma formation; and a very small portion of water stored in lawsonite and phengite will fade into the deeper mantle. The role of amphibole for arc magma formation is still arguable. In cold subduction P-Tregimes, the dehydration of chlorite and talc in AI-poor metasediments, and chloritoid and carpholite in AI-rich metapelites at a depth around 80--100 km will make some con- tributions to the formation of arc magma. Comparatively, dehydration of serpentine in hydrated peri- dotite occurs at depths of 120--180 km, playing an important role in the arc magmatism. Subduction of oceanic crust along warm P-T regimes will cross the solidi at a depth over 80 km, resulting in partial melting under fluid-saturated and fluid-absent conditions in the metasediments involving biotite and phengite, and in the basic rocks involving epidote and amphibole. The melt compositions of the basic crust are adakitic at pressures 〈 3.0 GPa, but become peraluminous granitic at higher pressures.     

Sentiment Analysis of Code-Mixed Bambara-French Social Media Text Using Deep Learning Techniques

The global growth of the Internet and the rapid expansion of social networks such as Facebook make multilingual sentiment analysis of social media content very necessary. This paper performs the first sentiment analysis on code-mixed Bambara-French Facebook comments. We develop four Long Short-term Memory (LSTM)-based models and two Convolutional Neural Network (CNN)-based models, and use these six models, Naïve Bayes, and Support Vector Machines (SVM) to conduct experiments on a constituted dataset. Social media text written in Bambara is scarce. To mitigate this weakness, this paper uses dictionaries of character and word indexes to produce character and word embedding in place of pre-trained word vectors. We investigate the effect of comment length on the models and perform a comparison among them. The best performing model is a one-layer CNN deep learning model with an accuracy of 83.23 %.     

Preparation of composite tubular grafts for vascular repair via electrospinning

A novel type of composite vascular graft was developed via electrospinning in the present investigation.Collagen and chitosan were blended to form the inner and outer layer.Poly(1-lactide-co-caprolacto...     

Analysis of fragrance composition in three cultivars of <Emphasis Type="Italic">Osmanthus fragrans</Emphasis> Albus group flower by gas chromatography-mass spectrometry

With supercritical CO2 fluid extraction(SCFE), essential oil was extracted from three cultivars of Xianning osmanthus. The fresh osmanthus flower was processed with a petroleum ether digestion method to produce the extractum. The yields of essential oil and extractum were 0.19 % and 0.13 % (m/m) respectively. The essential oil and fragrance composition and content extracted were analyzed with gas chromatography-mass spectrometer (GC-MS). The result showed that essential oil contained 36.99%(area/total area) of ionone, ionol and 13.11% of linalool; ionone and ionol contained in extractum were as high as up to 33.33%, while linalool up to 21.92%. Whether essential oil or extractum contains only about 40% fat acid and other ester matters. None of environmental estrogen (phthalic ester) was found in fragrance ingredients. The result also showed that the quality of O. fragrans Albus group fragrance in Xianning is better than that produced in Hangzhou and Anhui districts.     

ISTC： A New Method for Clustering Search Results

A new common phrase scoring method is proposed according to term frequency-inverse document frequency （TFIDF） and independence of the phrase. Combining the two properties can help identify more reasonable common phrases, which improve the accuracy of clustering. Also, the equation to measure the in-dependence of a phrase is proposed in this paper. The new algorithm which improves suffix tree clustering algorithm （STC） is named as improved suffix tree clustering （ISTC）. To validate the proposed algorithm, a prototype system is implemented and used to cluster several groups of web search results obtained from Google search engine. Experimental results show that the improved algorithm offers higher accuracy than traditional suffix tree clustering.     

Effect of slag composition on the cleanliness of 28MnCr5 gear steel in the refining processes

The equilibrium reaction between CaO—Al₂O₃—SiO₂—MgO slag and 28MnCr5 molten steel was calculated to obtain the suitable slag composition which is effective for decreasing the oxygen content in molten steel. The dissolved oxygen content [O] in molten steel under different top slag conditions was calculated using a thermodynamic model and was measured using an electromotive force method in slag–steel equilibrium experiments at 1873 K. The relations among [O], the total oxygen content (T.O), and the composition of the slag were investigated. The experimental results show that both [O] and T.O decrease with decreasing SiO₂ content of the slag and exhibit different trends with the changes in the CaO/Al₂O₃ mass ratio of the slag. Increasing the CaO/Al₂O₃ mass ratio results in a decrease in [O] and an increase in T.O. To ensure that T.O ≤ 20 ppm and [O] ≤ 10 ppm, the SiO₂ content should be controlled to <5wt%, and the CaO/Al₂O₃ mass ratio should be in the range from 1.2 to 1.6.     

Analysis of the formation conditions and characteristics of interphase and random vanadium precipitation in a low-carbon steel during isothermal heat treatment

The characteristics of nanosized precipitates in steels depend on the heat-treatment parameters. The effects of characteristics of vanadium precipitates formed during isothermal heat treatment on the hardness of the ferrite matrix in low-carbon vanadium-alloyed steel were investigated through analysis of transmission electron microscopy images and microhardness measurements. The results show that, during isothermal holding in the temperature range from 675 to 750℃, only interphase precipitation occurs, whereas only random precipitation occurs in the ferrite matrix during holding at 600℃. Furthermore, during isothermal heat treatment between 600 and 675℃, both random and interphase precipitates occurred in the ferrite. Nanoscale vanadium carbides with different atomic ratios of vanadium (V) and carbon (C) were the dominant precipitates in the random and interphase precipitates. The sizes of random precipitation carbides were smaller than those of interphase ones. Also, the sample isothermally heat treated at 650℃ for 900 s exhibited a higher hardness with a narrower hardness distribution.     

基于MMC的柔性直流输电动模装置节点控制器的设计及其动模实验

为了解决目前模块化多电平换流器动模装置所有子模块均由一个阀级控制器控制从而导致的控制系统复杂、系统成本升高等问题。本文提出了一种在阀级控制器和子模块级控制器间加入节点控制器的方案并在此方案上研制了动模装置。节点控制器的加入降低了主机控制器的硬件要求和光纤通道的使用数量,大大地降低了装置成本。同时,主机控制器与节点控制器之间的通讯采用循环冗余校验算法,增加了大容量数据高速传输的实时性和可靠性。通过对动模装置进行稳态实验和功率阶跃实验,结果表明系统能够正确快速地进行有功类物理量和无功类物理量的追踪控制以及子模块电容电压的稳定。     

Isothermal reduction kinetics and mineral phase of chromium-bearing vanadium-titanium sinter reduced with CO gas at 873-1273 K

Reduction of chromium-bearing vanadium-titanium sinter (CVTS) was studied under simulated conditions of a blast furnace, and thermodynamics and kinetics were theoretically analyzed. Reduction kinetics of CVTS at different temperatures was evaluated using a shrinking unreacted core model. The microstructure, mineral phase, and variation of the sinter during reduction were observed by X-ray diffraction, scanning electron microscopy, and metallographic microscopy. Results indicate that porosity of CVTS increased with temperature. Meanwhile, the reduction degree of the sinter improved with the reduction rate. Reduction of the sinter was controlled by a chemical reaction at the initial stage and inner diffusion at the final stage. Activation energies measured 29.22-99.69 kJ/mol. Phase transformations in CVTS reduction are as follows:Fe₂O₃→Fe₃O₄→FeO→Fe; Fe₂TiO₅→Fe₂TiO₄→FeTiO₃; FeO·V₂O₃→V₂O₃; FeO·Cr₂O₃→Cr₂O₃.