Fabrication of solenoid-type microinductor with different magnetic core schemes by MEMS technique

0 IntroductionThere has been a great demand on micro DC/DCconverter for the applications of the portable electronicproducts such as mobile communication product CDMA(Code Division Multiple Access) ,portable notebookcom-puter ,microprocessor ,digital camcorder andso on.Mag-netic components such as inductors and transformers arethe essential components in constructingthe power supplytransformer ,filter , oscillator , amplifier and micro DC/DCconverter ,andthe miniaturization of inductor an…     

Study on the application of active balancing device to solve the vibration problem for the rotor with bending fault

The rotor with bending faults that occurrs on the rotating machinery usually vibrates seriously. This paper investigates to apply the active balancing device on a flexible rotor with bending faults to solve the vibration problem. Two problems are studied by finite element method firstly： Where the balance actuator is fixed on the shaft and how much the balancing capacity of the active balancing device is needed. The experiment is then carried out on the test rig, which consists of a flexible rotor with bending faults. The test results indicate that the bending rotor peak vibration response can be decreased from 550~m to 40~tm below by using the active balancing device. The peak vibration response decreases approximately by 93 %. The synchronous vibration due to the rotor bending faults can be controlled effectively by using ac- tive balancing device. The active balancing device is especially adapted to solve the problem caused by thermal distortion with time-variation and randomness, which is varied with working conditions, thus it has good practical value in practice.     

A novel fully-integrated miniature six-axis force/torque sensor

This paper presents a new designed miniature six DOF （degree of freedom） force/torque sensor. This sensor is fully integrated with a micro DSP （digital signal processor）, so all the signal conditioning, A/D, decoupling, digital-signals serial output are performed in the sensor. Some experimental results are presented to demonstrate the capability of the proposed design. Finally, a neural network was used for decoupling the interacting signals, compared with the conventional method using the inverse matrix, this new method is more accurate.     

The Dynamics of Two-State Public Opinion Propagation On Signed Networks

The formation of public opinion on the network is a hot issue in the field of complex network research, and some classical dynamic models are used to solve this problem. The signed network is a particular form of the complex network, which can adequately describe the amicable and hostile relationships in complex real-world systems. However, the methods for studying the dynamic process of public opinion propagation on signed networks still require to be further discussed. In this paper, the authors pay attention to the influence of negative edges in order to design a two-state public opinion propagation mechanism suitable for signed networks. The authors first set the interaction rules between nodes and the transition rules of node states and then apply the model to synthetic and real-world signed networks. The simulation results show that there is a critical value of the negative edge ratio.When the negative edge ratio exceeds this critical value, the evolutionary result of public opinion will change from a consistent state to a split state. This conclusion is also consistent with the distribution result of opinions within communities in the signed network. Besides, the research on the network structural balance shows that the model makes the network evolve in a more balanced direction.     

Engineering of multiferroic BiFeO3 grain boundaries with head-to-head polarization configurations

Confined low dimensional charges with high density such as two-dimensional electron gas (2DEG) at interfaces and charged domain walls in ferroelectrics show gre...     

A Class of Second-Order Consensus Protocol in Multi-Agent Systems with Multiple Input Delays

This paper is concerned with the consensus problems for second-order multi-agent systems with multiple input delays. Different from all standard consensus algorithms with uniform delays, the authors aim to find the largest input-delay margin which can guarantee the consensus for the case when delays are nonuniform. Based on frequency domain analysis and matrix theory, an upper bound for maximum tolerable input-delay is given in terms of the relationship with scaling strengths and largest eigenvalue of the Lapalician matrix. Simulation results are provided to illustrate the obtained results.     

不同方法制备的PtRu/C催化剂对乙醇的电催化氧化

选用不同方法制备PtRu/C催化剂,运用循环伏安法、线性扫描法和计时电流法来检测乙醇及CO在不同方法制备的PtRu/C催化剂上的电催化氧化情况.发现无论在酸性溶液还是在中性溶液中,方法3制备的PtRu/C催化剂对乙醇和吸附态的CO的电氧化都有良好的催化活性.     

黑龙江省伊春市五营国家森林公园负离子研究

根据伊春市五营国家森林公园中的空气负氧离子浓度的实测资料,利用空气离子单极系数及空气离子评价系数进行了评价和研究.结果表明,该森林公园中空气负离子含量达到国际旅游度假区一级标准,空气清洁度属于A级“最清洁”;在动态水周围的一定范围内随着与动态水的距离的逐渐增大,空气离子单极系数大致呈线性增加趋势;空气离子评价系数值大致呈线性减小趋势.而在这个范围之外,两个值都将趋于平缓;在分别以红松、冷杉和白桦三种树种为主体的纯林中,空气清洁度均在早晚时比较高,在中午时出现低谷.     

体系作战效能评估与优化方法综述

分析了体系作战效能评估与优化的特点,基于“整体论”提出了将体系作战效能评估与优化划分为综合评估、分析、优化3个阶段的思路,针对3个阶段需要解决的实际问题,归纳总结了适用于解决各阶段问题的典型方法,并对比分析了不同方法的优缺点。针对“整体论”思想指导下体系作战效能评估与优化在实施中面临的实际困难,从综合应用框架设计、评估指标体系构建、试验推演模式创新等方面提出了下一步的研究方向,为体系作战效能评估与优化方法的有效落地提供了支撑。     

救援效率视角下灾后动态应急配送网络优化

针对应急救援问题,在受灾点的位置、需求以及受灾人口等信息动态变化的情况下,建立动态有向救援网络,以救援效率最大化为目标构建数学模型。运用数据包络分析模型,对各段救援路线的效率进行评价;建立基于效率的动态路由模型,通过时间片的划分将动态路由转化为多阶段的静态路由;设计了改进的混合贪心蚁群优化算法对模型进行求解,并将该算法与遗传算法、粒子群算法以及基础的蚁群算法进行对比。实验结果表明：改进的混合贪心蚁群优化算法能够有效处理动态路由问题,寻求到更高的救援效率。