聚合物乳液对纤维增强轻集料混凝土力学性能的影响

研究了聚合物乳液的掺入对纤维增强轻集料混凝土的强度与弯曲韧性的影响,结果表明,掺入聚合物乳液虽然在一定程度上降低了抗压强度,但可以显著提高轻集料混凝土的劈裂抗拉强度和抗折强度.聚合物乳液的掺入可以有效提高纤维增强轻集料混凝土的韧性、降低其脆性,韧度系数最高可提高32倍.研究发现,聚合物乳液对钢纤维增强轻集料混凝土的强度和韧性的改善效果优于对聚乙烯纤维增强轻集料混凝土的改善效果.     

Existence of macroscopic spatial superpositions in collapse theories

It is shown that the collapse dynamics in the CSL model will entangle two independent systems under certain conditions, and their state after collapse may be an entangled superposition of spatially separated states. However, since the conditions can hardly be satisfied in reality, the occurrence of such superpositions is very improbable, and thus collapse theories still provide a promising solution to the measurement problem.     

The Dynamics of Two-State Public Opinion Propagation On Signed Networks

The formation of public opinion on the network is a hot issue in the field of complex network research, and some classical dynamic models are used to solve this problem. The signed network is a particular form of the complex network, which can adequately describe the amicable and hostile relationships in complex real-world systems. However, the methods for studying the dynamic process of public opinion propagation on signed networks still require to be further discussed. In this paper, the authors pay attention to the influence of negative edges in order to design a two-state public opinion propagation mechanism suitable for signed networks. The authors first set the interaction rules between nodes and the transition rules of node states and then apply the model to synthetic and real-world signed networks. The simulation results show that there is a critical value of the negative edge ratio.When the negative edge ratio exceeds this critical value, the evolutionary result of public opinion will change from a consistent state to a split state. This conclusion is also consistent with the distribution result of opinions within communities in the signed network. Besides, the research on the network structural balance shows that the model makes the network evolve in a more balanced direction.     

Engineering of multiferroic BiFeO3 grain boundaries with head-to-head polarization configurations

Confined low dimensional charges with high density such as two-dimensional electron gas (2DEG) at interfaces and charged domain walls in ferroelectrics show gre...     

Adaptive Control of the Structural Balance for a Class of Complex Dynamical Networks

In social networks, the structural balance is a state of a group of individuals(nodes) with established mutual relationships(connection relationships) between them. It is easy to see that a social network can be described by a complex dynamical network model composed of the nodes subsystem(NS) and the connection relationships subsystem(CS), where the two subsystems are usually coupled with each other. It implies that the dynamic changes of nodes' states may cause the structural balance in CS. However, few papers have discussed the relationship between the structural balance and the specific dynamic changes of the nodes' states. This paper proposes a model of complex dynamical networks, and mainly focuses on the dynamic changes of states in NS which can lead to the structural balance in CS. It is proved that if each state in NS is doing a specific dynamic motion via the controller with the parameter adaptive law, then the CS can track a given structural balance matrix via the effective coupling and the structural balance can be achieved. Such a result can be regarded as an explanation of the relationship between the structural balance and the specific dynamic changes of the nodes' states. Finally, the simulations verify the effectiveness of the proposed method.     

A novel fully-integrated miniature six-axis force/torque sensor

This paper presents a new designed miniature six DOF （degree of freedom） force/torque sensor. This sensor is fully integrated with a micro DSP （digital signal processor）, so all the signal conditioning, A/D, decoupling, digital-signals serial output are performed in the sensor. Some experimental results are presented to demonstrate the capability of the proposed design. Finally, a neural network was used for decoupling the interacting signals, compared with the conventional method using the inverse matrix, this new method is more accurate.     

Study on the application of active balancing device to solve the vibration problem for the rotor with bending fault

The rotor with bending faults that occurrs on the rotating machinery usually vibrates seriously. This paper investigates to apply the active balancing device on a flexible rotor with bending faults to solve the vibration problem. Two problems are studied by finite element method firstly： Where the balance actuator is fixed on the shaft and how much the balancing capacity of the active balancing device is needed. The experiment is then carried out on the test rig, which consists of a flexible rotor with bending faults. The test results indicate that the bending rotor peak vibration response can be decreased from 550~m to 40~tm below by using the active balancing device. The peak vibration response decreases approximately by 93 %. The synchronous vibration due to the rotor bending faults can be controlled effectively by using ac- tive balancing device. The active balancing device is especially adapted to solve the problem caused by thermal distortion with time-variation and randomness, which is varied with working conditions, thus it has good practical value in practice.     

Fabrication of solenoid-type microinductor with different magnetic core schemes by MEMS technique

0 IntroductionThere has been a great demand on micro DC/DCconverter for the applications of the portable electronicproducts such as mobile communication product CDMA(Code Division Multiple Access) ,portable notebookcom-puter ,microprocessor ,digital camcorder andso on.Mag-netic components such as inductors and transformers arethe essential components in constructingthe power supplytransformer ,filter , oscillator , amplifier and micro DC/DCconverter ,andthe miniaturization of inductor an…     

基于GIS、GPS、GSM的救护车智能管理系统研究

文章提出了一种救护车智能管理系统。该系统基于GIS、GPS、GSM技术,它能在发生紧急事故时,提供救护车到达出事地点,再从出事地点到达最近医院的最佳路径,该系统能够使救护车始终处于监控之下。我们通过设计有效的数据结构和算法来实现系统的上述功能。     

板式换热器中蒸汽凝结换热特性

在板式换热器的蒸汽凝结换热试验台上进行了实验研究,获取蒸汽完全凝结和部分凝结两种典型工况下的换热和压降特性．且就板式换热器中蒸汽凝结过程的换热进行分析和处理,得到了一个在板片槽道中蒸汽凝结换热系数关联式．并推荐用于板式换热器的蒸汽凝结换热系数的计算．