重庆鳞始蕨科1新纪录种:团叶鳞始蕨

【目的】完善重庆市缙云山维管植物物种多样性资料。【方法】采用常规植物调查方法,调查采集缙云山自然保护区维管植物,并于室内进行物种鉴定。【结果】根据野外植物活体植物和标本馆相关植物标本的比较形态研究,确定团叶鳞始蕨(Lindsaea orbiculata (Lam.)Mett.ex Kuhn)为重庆市1新纪录种。【结论】重庆市又增加1种维管植物,缙云山是团叶鳞始蕨已知分布区的北缘。
     

Deep cleaning of a metallurgical zinc leaching residue and recovery of valuable metals

Huge quantities of zinc leaching residues (ZLRs) generated from zinc production are dumped continuously around the world and pose a potential environmental threat because of their considerable amounts of entrained heavy metals (mainly lead). Most ZLRs have not been properly treated and the valuable metals in them have not yet been effectively recovered. Herein, the deep cleaning of a ZLR and recovery of valuable metals via a hydrometallurgical route were investigated. The cleaning process consists of two essential stages:acid leaching followed by calcium chloride leaching. The optimum conditions for extracting zinc, copper, and indium by acid leaching were a sulfuric acid concentration of 200 g·L-1, a liquid/solid ratio of 4:1 (mL/g), a leaching time of 2 h, and a temperature of 90℃. For lead and silver extractions, the optimum conditions were a calcium chloride concentration of 400 g·L-1, a pH value of 1.0, a leaching time of 1 h, and a temperature of 30℃. After calcium chloride leaching, silver and lead were extracted out and the lead was finally recovered as electrolytic lead by electrowinning. The anglesite phase, which poses the greatest potential environmental hazard, was removed from the ZLR after deep cleaning, thus reducing the cost of environmental management of ZLRs. The treatment of chlorine and spent electrolyte generated in the process was discussed.     

Development of liquid-nitrogen-cooling friction stir spot welding for AZ31 magnesium alloy joints

A liquid-nitrogen-cooling friction stir spot welding (C-FSSW) technology was developed for welding AZ31 magnesium alloy sheets. The liquid-nitrogen cooling degraded the deformability of the welded materials such that the width of interfacial cracks increased with increasing cooling time. The grain size of the stirred zone (SZ) and the heat-affected zone (HAZ) of the C-FSSW-welded joints decreased, whereas that of the thermomechanically affected zone (TMAZ) increased with increasing cooling time. The maximum tensile shear load of the C-FSSW-welded joints welded with a cooling time of 5 or 7 s was larger than that of the friction stir spot welding (FSSW)-welded joint, and the tensile shear load decreased with increasing cooling time. The microhardness of the C-FSSW-welded joints was greater than that of the FSSW-welded joint. Moreover, the microhardness of the SZ and the HAZ of the C-FSSW-welded joints increased, whereas that of the TMAZ decreased, with increasing cooling time.     

Teeming stream protection using an argon shroud during casting of steel ingots

Two kinds of argon shroud protection devices with two different basic structures were designed and investigated. Industrial experiments and numerical simulations were used to examine the protection effect, and the mechanism of air entrapment during the casting of steel ingots was analyzed. The influence of the structure of the argon shroud protection device on the protection effect was investigated. An argon shroud protection device mounted to the nozzle holder on the bottom of the ladle does not provide a good protection effect because air can easily flow into the teeming system and cause reoxidation of molten steel during teeming. By contrast, an argon shroud protection device seated on the top of the central trumpet provides an excellent protection effect, where air has little chance of flowing into the teeming system during casting. The feasibilities of the argon shroud protection devices are discussed.     

Studies on induction hardening of powder-metallurgy-processed Fe-Cr/Mo alloys

Induction hardening of dense Fe-Cr/Mo alloys processed via the powder-metallurgy route was studied. The Fe-3Cr-0.5Mo, Fe-1.5Cr-0.2Mo, and Fe-0.85Mo pre-alloyed powders were mixed with 0.4wt%, 0.6wt%, and 0.8wt% C and compacted at 500, 600, and 700 MPa, respectively. The compacts were sintered at 1473 K for 1 h and then cooled at 6 K/min. Ferrite with pearlite was mostly observed in the sintered alloys with 0.4wt% C, whereas a carbide network was also present in the alloys with 0.8wt% C. Graphite at prior particle boundaries led to deterioration of the mechanical properties of alloys with 0.8wt% C, whereas no significant induction hardening was achieved in alloys with 0.4wt% C. Among the investigated samples, alloys with 0.6wt% C exhibited the highest strength and ductility and were found to be suitable for induction hardening. The hardening was carried out at a frequency of 2.0 kHz for 2-3 s. A case depth of 2.5 mm was achieved while maintaining the bulk (interior) hardness of approximately HV 230. A martensitic structure was observed on the outer periphery of the samples. The hardness varied from HV 600 to HV 375 from the sample surface to the interior of the case hardened region. The best combination of properties and hardening depth was achieved in case of the Fe-1.5Cr-0.2Mo alloy with 0.6wt% C.     

BotGuard: Lightweight real-time botnet detection in software defined networks

The distributed detection of botnets may induce heavy computation and communication costs to network devices. Each device in related scheme only has a regional view of Internet, so it is hard to detect botnet comprehensively. In this paper, we propose a lightweight real-time botnet detection framework called Bot-Guard, which uses the global landscape and flexible configurability of software defined network (SDN) to identify botnets promptly. SDN, as a new network framework, can make centralized control in botnet detection, but there are still some challenges in such detections. We give a convex lens imaging graph (CLI-graph) to depict the topology characteristics of botnet, which allows SDN controller to locate attacks separately and mitigate the burden of network devices. The theoretical and experimental results prove that our scheme is capable of timely botnet detecting in SDNs with the accuracy higher than 90% and the delay less than 56 ms.     

Cobalt doped titanate nanotubes: Synthesis and properties

Cobalt oxide doped titanate nanotubes are synthesized with a simple hydrothermal treatment of mixed Co_3O_4 and TiO_2 powders. The formed tubular nanostructure, chemical composition,and the elemental distribution are analyzed using TEM, BET, FTIR, XRD, and XPS. The electrocatalytic activity towards oxygen evolution reactions and photodegradation against Rhodamine B are investigated. It has been found out that the oxygen evolutions starts at 0.8 V and reaches 0.98 mA ·cm~(–1) at 1.4 V vs. SCE. For photodegradation of Rhodamine B, the concentration decreased to 24% after 1 h irradiation using the sample with a mass percentage of 5% cobalt. The results demonstrate that the cobalt oxide doped titanate nanotubes are good candidates as electrocatalysts and photocatalytic materials.     

DPSIR model-based evaluation index system for geographic national conditions

Establishing a reasonable evaluation index system is the basis and premise for the scientific evaluation of geographic national conditions. By analyzing the DPSIR model and its correlation and relation with the evaluation index system, the indexes for geographic national conditions were selected from the aspects of resources, ecology, environment, economy, society, etc to build an evaluation index system for geographic national conditions that consists of three hierarchies: index, criterion, and target levels. Furthermore, the index system was analyzed in terms of index integrity, low overlapping of elements, non-existence of isolated indexes, hierarchy of index system, etc., for the purpose of demonstrating that the DPSIR model-based evaluation index system for geographic national conditions meets the principles of index system establishment.     

Glutenin macropolymer particles size distribution of six wheat varieties in eastern China

Size distribution of glutenin macropolymer(GMP) particles significantly affects the quality of final products in wheat. Six wheat varieties in eastern China were used for investigating the GMP content, particle size distribution and their relation. The results showed that the particle diameter of GMP changed from 0.38 μm to 269 μm. A typical bimodal curve of volume distribution of particles with peak values ranged from 4.44 μm to 5.36 μm and from 45.76 μm to 116.30 μm, respectively. Number distribution of particles showed the typical population with peak values in the range of 0.57-1.00 μm. Proportions of granules 12 μm, 12-80 μm and 80 μm were in the range of 17.1%-47.8%, 32.1%-50.3% and 10.2%-38.1% of total volume, respectively. The content of GMP was negatively correlated with the volume of GMP particles 12 μm, but positively correlated with the volume of particles 80 μm. The results suggested that the greater percentage of larger GMP particles is, the more GMP content there is in wheat grain.     

Secure pairing with wearable devices by using ambient sound and light

Wearable devices usually work together with smart phones. To ensure only legitimate smart phones can read the data, they must conduct pairing to establish a shared key. Traditional pairing methods require that the pairing devices have a keyboard or screen for user interaction. However, due to the size limitation, keyboards or screens are hard to be installed in the wearable devices. To solve this problem, we propose a novel pairing method by using ambient sound and light. In this new scheme, any pairing request from smart phone will trigger wearable device vibration. Only after users press the confirm key on the device can the pairing process continues. Then pairing devices collect ambient sound and light at the predetermined time and establish a shared key by using the Diffie-Hellman protocol. To protect against potential man-in-the-middle attacks in the key establishment process, an improved interlock protocol with sound and light comparison is conducted to authenticate the key. If both the sound and light collected by the pairing devices are similar enough, the key is accepted. Otherwise, it is rejected. Compared with current context based pairing methods, our scheme does not impose strict synchronization on devices to collect ambient context data. Moreover, our scheme need not collect and exchange contextual information for multiple times to resist offline brute force attacks. The experimental results and security analysis prove the effectiveness of our scheme.