古潜山油藏裂缝性储层的测井评价

古潜山裂缝性储层具有复杂的储集空间和储层非均质性 ,对缝洞发育程度的评价在储层性能的评价中起着至关重要的作用。以岩心分析资料为基础 ,将地层微电阻率扫描成像测井 (FMI)、常规测井与地质理论相结合 ,对研究区的十几口井进行了详细的裂缝识别 ,对地层岩性特征、构造特征与地应力进行了分析。分析结果表明 ,该区裂缝及溶蚀孔洞发育程度从南到北、从构造高部位向东、西两翼的构造低部位逐渐变差 ,最大主应力方向基本为北东东南西西 ,古应力的方向基本为北东南西。该方法的解释结果与地质情况吻合较好。     

Compact difference approximation with consistent boundary condition

For simulating multi-scale complex flow fields it should be noted that all the physical quantities we are interested in must be simulated well. With limitation of the computer resources it is preferred to use high order accurate difference schemes. Because of their high accuracy and small stencil of grid points computational fluid dynamics (CFD) workers pay more attention to compact schemes recently. For simulating the complex flow fields the treatment of boundary conditions at the far field boundary points and near far field boundary points is very important. According to authors' experience and published results some aspects of boundary condition treatment for far field boundary are presented, and the emphasis is on treatment of boundary conditions for the upwind compact schemes. The consistent treatment of boundary conditions at the near boundary points is also discussed. At the end of the paper are given some numerical examples. The computed results with presented method are satisfactory.     

Identification and mapping of quantitative trait loci controlling cold-tolerance of Chinese common wild rice (O. rufipogon Griff.) at booting to flowering stages

Cold injury is an important limitation of rice production. Therefore, screening for cold-tolerant genetic resources and the development of highly cold-tolerant cultivars is crucial for higher yield potential and stable yield of rice. There have been several reports on the genetic analysis and QTL mapping of the cold-tolerance at the booting stage. Toriyama et al.[1,2] and Futsuhara et al.[3,4] reported that 4 or more genes were involved in the cold-tolerance. Several QTLs at the booting sta…     

离子选择性电极直接电位法测定牙膏中游离氟

利用氟离子选择性电极直接电位法测定了牙膏中的游离氟．讨论了总离子强度调节缓冲剂(TISAB)的组成及用量，氟电极在测定后快速恢复到空白值，以及不同空白值对测定结果的影响．实验结果表明游离氟的浓度在0．1000-9．000mg／ml范围内线性关系良好．方法的最低检出限为0．02000μg／ml，相对标准偏差RSD≤2．5％，加标平均回收率为100．8％～104．7％，方法简便，准确．     

对甲苯磺酸催化合成丁酸异戊酯

对甲苯磺酸作为丁酸异戊醇的酯化催化剂,性能优于硫酸,本文探讨并确定了丁酸与异戊醇酯化反应的最佳条件:以0.2mol正丁酸为基准,醇酸摩尔比为1.5,环己烷7.5ml,催化剂用量2.5％,反应时间2小时,酯收率达94.3％。     

螺杆冷水机组稳态仿真

为预测螺杆冷水机组在大范围结构参数以及运行工况下的性能 ,提出了该类相应的稳态仿真模型 .模型由一系列部件模型组成 ,包括压缩机、经济器、膨胀阀、壳管式冷凝器以及满液式蒸发器 .结合顺序模块方法和连续替代方法实现了模型的求解 .模型预测结果与不同规格的 4台不带经济器冷水机组和 3台带经济器冷水机组的实验数据相比 ,误差在± 1 0 %以内 .通过模型验证发现 ,只有当压缩机一级内压缩容积比大于一定值时 ,机组才能获得高于其不带经济器时的 COP     

关于致密天体内部的格林函数

利用Jellium模型，根据量子统计理论讨论了致密天体的格林函数，得出的结果对一般致密天体可能是适用的。     

黄颡鱼人工繁殖的初步研究

利用面积为2000m^2的鲫鱼池套养培育黄颡鱼亲鱼；采用不同的药物和剂量进行人工催产；利用家鱼孵化池进行流水孵化。实验结果表明：黄颡鱼在性成熟度基本一致的情况下，用LRH—A2 DOM PG(LRH—A2、DOM、PG分别为4ug、0．8mg、2．2mg)的配合药物来进行生产，催产率可达到95％。     

稠密Ar等离子体中粒子间相互作用的研究

采用压致电离和离子球模型处理稠密等离子体中粒子之间的相互作用,探讨了冲击压缩产生的稠密氩等离子 体中粒子之间相互作用对电子密度的影响.     

电容式微机械加速度计部分力学特性的分析

推导了电容式微机械加速度计的悬臂梁在加速度作用下可能出现的两种挠度情况，分析了在制造过程中残余应力对于加速度计造成的影响，推导了电容式微加速度计的工作原理，并推荐了相应的工作模式．