15PLK喷淋头的研究

根据堆浸工艺的需要,介绍了15PLK喷淋头的研究情况.通过对其主要参数的测定,分析计算,说明15PLK喷淋头的参数满足堆浸工艺的需要,符合国家标准.从而研制完成了一种新型的、适合堆浸矿山用的喷淋头.     

聚丙烯酸乙酯-g-聚甲基丙烯酸甲酯接枝共聚物的合成

丙烯酸乙酯与2-溴丙烯酸乙酯乳液共聚合制备了聚(丙烯酸乙酯-co-2-溴丙烯酸乙酯)无规共聚物，用该共聚物作为原子转移自由基聚合的大分子引发剂，进行了甲基丙烯酸甲酯的接枝聚合，制备了聚丙烯酸乙酯-g-聚甲基丙烯酸甲酯接枝共聚物。接枝共聚物的分子量随单体转化率的上升而线性增加。     

基于实体连接的信息组织技术

企业在实施信息化过程中，由于未规划系统和信息变动因素等存在，使得企业不得不改变原有信息系统的数据模式，但现有的信息组织技术及理论却难以解决未规划系统和信息变动对数据模式无损依赖性和无损连接性的影响，极大地影响了企业实施信息化的进程，也造成了资源浪费。针对以上问题，以关系数据理论为基础，借助E—R语义建模模型，提出了一种基于实体连接的信息组织技术，该信息组织技术具有良好的扩展性和柔性，能够适应企业信息的变化和调整。     

弱条件线性方程组的一种迭代方法

设A为m×n矩阵、线性方程组AX=b相容,其解集为C。给出了求X∈C的迭代方法。对序列{X(k)},其中λit(k)X(k)满足: X0,X(k+1)=X(k)+ mi=[bi-(Ai,X(k))]/‖Ai‖2,k=0,1,2,…。证明了{X(k)}收敛,设i,Ai,t(k)i=1X(k)=X ,则X ∈C。若取X0=0,则X ∈R(AT),其中R(AT)={ATX｜X∈Rm}。limk→∞     

储蓄凭条中手写体的提取与净化系统

给出了储蓄凭条手写体提取系统的设计与实现,包括预处理,建立模板,基线定位与去除,倾斜校正 处理,定位格去除和手写体净化分割等。重点讲述了图像二值化,手写体分割与净化算法。     

Compact difference approximation with consistent boundary condition

For simulating multi-scale complex flow fields it should be noted that all the physical quantities we are interested in must be simulated well. With limitation of the computer resources it is preferred to use high order accurate difference schemes. Because of their high accuracy and small stencil of grid points computational fluid dynamics (CFD) workers pay more attention to compact schemes recently. For simulating the complex flow fields the treatment of boundary conditions at the far field boundary points and near far field boundary points is very important. According to authors' experience and published results some aspects of boundary condition treatment for far field boundary are presented, and the emphasis is on treatment of boundary conditions for the upwind compact schemes. The consistent treatment of boundary conditions at the near boundary points is also discussed. At the end of the paper are given some numerical examples. The computed results with presented method are satisfactory.     

Identification and mapping of quantitative trait loci controlling cold-tolerance of Chinese common wild rice (O. rufipogon Griff.) at booting to flowering stages

Cold injury is an important limitation of rice production. Therefore, screening for cold-tolerant genetic resources and the development of highly cold-tolerant cultivars is crucial for higher yield potential and stable yield of rice. There have been several reports on the genetic analysis and QTL mapping of the cold-tolerance at the booting stage. Toriyama et al.[1,2] and Futsuhara et al.[3,4] reported that 4 or more genes were involved in the cold-tolerance. Several QTLs at the booting sta…     

螺杆冷水机组稳态仿真

为预测螺杆冷水机组在大范围结构参数以及运行工况下的性能 ,提出了该类相应的稳态仿真模型 .模型由一系列部件模型组成 ,包括压缩机、经济器、膨胀阀、壳管式冷凝器以及满液式蒸发器 .结合顺序模块方法和连续替代方法实现了模型的求解 .模型预测结果与不同规格的 4台不带经济器冷水机组和 3台带经济器冷水机组的实验数据相比 ,误差在± 1 0 %以内 .通过模型验证发现 ,只有当压缩机一级内压缩容积比大于一定值时 ,机组才能获得高于其不带经济器时的 COP     

关于致密天体内部的格林函数

利用Jellium模型，根据量子统计理论讨论了致密天体的格林函数，得出的结果对一般致密天体可能是适用的。     

稠密Ar等离子体中粒子间相互作用的研究

采用压致电离和离子球模型处理稠密等离子体中粒子之间的相互作用,探讨了冲击压缩产生的稠密氩等离子 体中粒子之间相互作用对电子密度的影响.