弱条件线性方程组的一种迭代方法

设A为m×n矩阵、线性方程组AX=b相容,其解集为C。给出了求X∈C的迭代方法。对序列{X(k)},其中λit(k)X(k)满足: X0,X(k+1)=X(k)+ mi=[bi-(Ai,X(k))]/‖Ai‖2,k=0,1,2,…。证明了{X(k)}收敛,设i,Ai,t(k)i=1X(k)=X ,则X ∈C。若取X0=0,则X ∈R(AT),其中R(AT)={ATX｜X∈Rm}。limk→∞     

储蓄凭条中手写体的提取与净化系统

给出了储蓄凭条手写体提取系统的设计与实现,包括预处理,建立模板,基线定位与去除,倾斜校正 处理,定位格去除和手写体净化分割等。重点讲述了图像二值化,手写体分割与净化算法。     

Compact difference approximation with consistent boundary condition

For simulating multi-scale complex flow fields it should be noted that all the physical quantities we are interested in must be simulated well. With limitation of the computer resources it is preferred to use high order accurate difference schemes. Because of their high accuracy and small stencil of grid points computational fluid dynamics (CFD) workers pay more attention to compact schemes recently. For simulating the complex flow fields the treatment of boundary conditions at the far field boundary points and near far field boundary points is very important. According to authors' experience and published results some aspects of boundary condition treatment for far field boundary are presented, and the emphasis is on treatment of boundary conditions for the upwind compact schemes. The consistent treatment of boundary conditions at the near boundary points is also discussed. At the end of the paper are given some numerical examples. The computed results with presented method are satisfactory.     

Identification and mapping of quantitative trait loci controlling cold-tolerance of Chinese common wild rice (O. rufipogon Griff.) at booting to flowering stages

Cold injury is an important limitation of rice production. Therefore, screening for cold-tolerant genetic resources and the development of highly cold-tolerant cultivars is crucial for higher yield potential and stable yield of rice. There have been several reports on the genetic analysis and QTL mapping of the cold-tolerance at the booting stage. Toriyama et al.[1,2] and Futsuhara et al.[3,4] reported that 4 or more genes were involved in the cold-tolerance. Several QTLs at the booting sta…     

旋转机械轴心轨迹故障诊断

应用轴心轨迹图的直观性特点，对旋转机械进行状态监测和故障诊断。从轴心轨迹图上判断出振动的前期征兆，对防止故障的恶化和排除故障具有指导作用。因此利用轴心轨迹图来判断旋转机械是否处于正常状态是可行的。     

螺杆冷水机组稳态仿真

为预测螺杆冷水机组在大范围结构参数以及运行工况下的性能 ,提出了该类相应的稳态仿真模型 .模型由一系列部件模型组成 ,包括压缩机、经济器、膨胀阀、壳管式冷凝器以及满液式蒸发器 .结合顺序模块方法和连续替代方法实现了模型的求解 .模型预测结果与不同规格的 4台不带经济器冷水机组和 3台带经济器冷水机组的实验数据相比 ,误差在± 1 0 %以内 .通过模型验证发现 ,只有当压缩机一级内压缩容积比大于一定值时 ,机组才能获得高于其不带经济器时的 COP     

关于致密天体内部的格林函数

利用Jellium模型，根据量子统计理论讨论了致密天体的格林函数，得出的结果对一般致密天体可能是适用的。     

稠密Ar等离子体中粒子间相互作用的研究

采用压致电离和离子球模型处理稠密等离子体中粒子之间的相互作用,探讨了冲击压缩产生的稠密氩等离子 体中粒子之间相互作用对电子密度的影响.     

电容式微机械加速度计部分力学特性的分析

推导了电容式微机械加速度计的悬臂梁在加速度作用下可能出现的两种挠度情况，分析了在制造过程中残余应力对于加速度计造成的影响，推导了电容式微加速度计的工作原理，并推荐了相应的工作模式．     

基于三层体系结构电子政务系统的JSP技术

引用国际先进的开发技术将三层网站体系结构应用于长春房地网。使用了面向对象数据库技术,并将连接池技术用于访问Oracle数据库,解决了网站中连接数据库的稳定性和连接效率问题。利用JSP(JavaServerPage)、Servlet、JavaBean、连接池、高速缓存等先进技术构建的电子政务系统,在可扩展性、效率和实用性等方面有了极大的提高。