海洋胶体中的氮、磷和铁对微藻脂肪酸组成和含量的影响

以海洋微藻(海水小球藻、亚心形扁藻和球等鞭金藻)为对象,利用错流超滤技术提取海洋胶体,分别以胶体为唯一的氮、磷和铁源,研究胶体及其有机碳(COC)浓度对微藻脂肪酸组成和含量的影响.结果表明:以胶体为唯一氮源的体系,小球藻和金藻的脂肪酸与COC浓度之间无相关关系;低COC浓度下脂肪酸组分和含量多于高COC浓度下脂肪酸组分和含量.以胶体为唯一磷源的体系,3种微藻的脂肪酸各组分含量与COC浓度呈线性正相关;ccoc=0时脂肪酸组分最多,ccoc=238.4μmol/L时脂肪酸含量最高.以胶体为唯一铁源的体系,在COC浓度范围内(0～238.4μmol/L),各微藻脂肪酸含量与COC浓度呈线性正相关;ccoc=119.2～238.4μmol/L时,脂肪酸组分最多,含量最高.以胶体为唯一氮源体系培养的3种微藻的总不饱合脂肪酸含量最高,以胶体为唯一铁源体系培养的含量最小.     

固液反应球磨制备Fe-Zn和Fe-Sb系金属间化合物

采用一种固液反应球磨专利技术制备了Fe-Zn和Fe-Sb系列金属间化合物粉末，考察了金属液体中加入与磨球成分相同的金属粉末对反应速度的影响，并分析讨论了该技术制备金属间化合物的机理和特点．     

A Study on the Surface Structures of Viscose-based Activated Carbon Fiber by FT-IR Spectroscopy and XPS

Using viscose fiber (VF) as starting material and common steam as activating agent, formation of oxygen structures in activated carbon fiber is investigated. In the preparation of samples, VF was first heated at temperatures between 450℃ and 900℃ in N_2 artmosphere. Then, in a successive activation stage, the product carbonized at 600℃ was activated in steam at 450-900℃ for 30 min, and at 600℃ for 5-30 min. The other carbonization products were activated at 600 and 900℃ for 30 min respectively. The products activated at 900℃ were then activated at 450℃ for 30 min again. The starting materiah carbonized products and all activation products were examined by FT-IR spectroscopy and some products were examined by X-ray photoelectron spectroscope (XPS). And the yields of the carbonized and activated products were calculated. By analysing these spectra, the amount of oxygen-containing functional groups of the activated products attained under various activation time, various activation temperature and     

聚丙烯/笼型聚硅倍半氧烷的非等温结晶及其动力学研究

采用熔融挤出共混的方法制备了均聚聚丙烯(iPP)/笼型八聚(异丁基)硅倍半氧烷(OIBS)复合材料,并用DSC法研究了此种复合材料的非等温结晶行为,当OIBS质量分数为1%和30%的样品结晶峰温T_p高于iPP的T_p,而OIBS质量含量为5%和10%样品的T_p低于iPP的T_p值,OIBS含量对结晶起始温度T₀和结晶峰半高宽W_1/2·h的影响与T_p相似.说明适量的OIBS对iPP具有异相成核作用。采用修正Avrami方程的Jeziorny法及莫志深法对数据进行处理并计算出结晶动力学参数。结果表明适量OIBS的加入可提高iPP的结晶速率。     

高压静电场处理油菜种子的品质影响及模型探讨

研究了高压静电场处理种子在大田生长条件下的长期效应 .结果表明 ,较低电压的处理可提高硫甙含量显著降低含油量 ,而较高电压的处理可降低硫甙含量 ,极显著降低芥酸含量 .采用平面类脂双层模型分析外加高压静电场对植物细胞跨膜电位的影响 ,并探讨其微观机理 ,一定程度上可以解释相关的实验结果     

基于超级电容器的TiN@CNTF电极制备及性能研究

超级电容器因其独特的性能在便携式、可穿戴电子器件领域有着很大的应用潜力。目前对超级电容器的研究主要集中在对超级电容器电极材料的研究上。碳纳米管纤维具有电导率高、力学性能好、柔韧性高等优点,是超级电容器的理想电极材料。但是,碳纳米管纤维电容量的提升被其较小的比表面积所限制。通过在碳纳米管纤维表面生长三维阵列能够有效提高碳管纤维的比表面积,从而增大电容量。因此,采用水热法,在碳纳米管纤维表面成功生长TiO2纳米阵列,并通过氨气氮化获得了TiN@CNTF电极材料。采用三电极测试TiN@CNTF电极在Na2SO4溶液中的比电容达到215.5mF/cm2,有望作为一种柔性超级电容器的负极材料得到应用。     

石墨烯-碳量子点复合材料的电化学性能研究

采用Hummers法和水热法,制备石墨烯和碳量子点溶液作为前驱体,然后通过一步煅烧法制得石墨烯-碳量子点复合材料。借助SEM、UV-Vis、FTIR等手段,对样品的形貌和结构进行表征;利用循环伏安法(CV)、差分脉冲伏安法(DPV)及恒流充放电循环测试等,重点考察了样品的电化学性能。结果表明,在石墨烯表面负载碳量子点可增加材料的比表面积并改善其机械性能,由于活性位点的增加,所制石墨烯-碳量子点复合电极具有较好的可逆性及电化学活性;在检测不同浓度双氧水时,复合电极的灵敏度为纯石墨烯电极的1.4倍左右;石墨烯-碳量子点复合材料作为锂离子电池负极使用时,与纯石墨烯材料相比具有更好的循环稳定性,且容量保持率提高了1.67倍。     

Microstructure characterization and hydrogen storage properties study of Mg2Ni0.92M0.08 (M = Ti, V, Fe or Si) alloys

In the present study Mg_2Ni-type compounds alloyed independently with Ti,V,Fe and Si were successfully prepared by wet-milling followed by sintering.Although these alloyed Mg_2Ni compounds exhibited a similar hydrogen storage mechanism as that of pure Mg_2Ni,the dissolution of Ti,V or Fe into the Mg_2NiH_4lattice had a considerable catalytic effect on hydrogen desorption from additional MgH_2.The further structure investigations clearly indicated that the substitution of Ti for Ni could suppress the formation of the micro-twined low-temperature phase(LT2)and promote the formation of the high-temperature phase(HT),thus resulting in remarkably improved hydrogen desorption kinetics for the Mg_2Ni_(0.92)Ti_(0.08)–H system.     

Coupling effects of tungsten and molybdenum on microstructure and stressrupture properties of a nickel-base cast superalloy

In order to comprehensively understand the forming mechanism of abnormal phases solidified in a nickel-base cast superalloy with additives of tungsten and molybdenum, the coupling effects of W and Mo on the microstructure and stress-rupture properties were investigated in this paper. The results indicated that the precipitation of primary α-(W, Mo) phase depended tremendously on the amount of W and Mo addition. When the total amount of W and Mo was greater than 5.79 at%, α-(W, Mo) phase became easily precipitated in the alloy.With increasing of Mo/W ratio, the dendrite-like α-(W, Mo) phases were apt to convert into small bars or blockylike phases at the vicinities of γ′/γ eutectic. The morphological changes of α-(W, Mo) phase can be interpreted as the non-equilibrium solidification of W and Mo in the alloy. Since the large sized α-(W, Mo) phase has detrimental effects on stress-rupture properties in as-cast conditions, secondary cracks may mainly initiate at and then propagate along the interfaces of brittle phases and soft matrix. During exposing at 1100 ℃ for 1000 h, the α-(W, Mo) phases transformed gradually into bigger and harder M_6C carbide, which results in decreasing of stress-rupture properties of the alloy. Finally, the alloy with an addition of 14W-1Mo(wt%) maintained the longest stress lives at high temperatures and therefore it revealed the best microstructure stability after 1100 ℃/1000 h thermal exposure.     

无锡市科技社团人才培养策略研究

为实施我国人才兴国战略和全面建设"强富美高"新无锡,笔者客观分析了无锡科技社团人才培育的现状,发现人才结构偏大龄化、科技社团管理人才缺乏、人才发展机制缺失等是目前存在的主要问题。针对以上问题,通过走访调研及相关文献资料研究,对本市科技人才培养提出了新的人才培育策略,如对科技人才内涵重新界定、针对国内不同学龄阶段的科技人才分段培养、提倡科技社团职业经理人的培养、实施科技人才全球化战略和注重现有科技人才保护等策略。