伪斜柔性支架工作面通风方式对采空区自然发火影响

在水模拟实验及示踪显影实验的基础上,研究了上、下行通风方式对急倾斜煤层伪斜柔性支架工作面采空区自然发火的不同影响,得出结论:下行通风对防止急倾斜伪斜柔性支架工作面采空区自然发火极为有利;另外,上行通风在坡道与工作面汇交处存在增加自然发火危险性的“气动闸阀”效应,而下行通风不存在.     

退缩椭园型方程广义解的局部估计

本文应用Ｍｏｓｅｒ方法建立退缩椭园型方程： 的广义解在区域内部和边界点邻域的局部估计与Ｈａｒｎａｃｋ不等式,并讨论解在区域内部和在边界 点的连续性。     

中国1:100万地貌图衡阳(G-49)幅简析——1.地貌结构特征及其发育过程

中国1:100万地貌图衡阳(G—49)幅,具有“+”字形过渡性的地貌格局,图幅范围内“丹霞地貌”和“喀斯特地貌”很发育,地貌类型多样,以流水地貌为主。在地质构造和地壳运动影响下,断裂发育,特别是新构造运动及外力因素,对区域地貌的形成,起着很大的作用。     

A wireframe model-based method for automated internal design

This paper proposes a wireframe model-based method for automated internal design. The method is used to extract geometric structure of an internal wireframe model and find out all loop structures of furniture models. The wireframe models are classified as the multiple independent sub-models according to the geometric structure by statistical analysis. The corresponding models are selected from a 3D model database to build an internal scene based on characteristic points of furniture wireframe models. In the experiments 3D database via manually selected 268 3D furniture models from Google 3D warehouse is built up. The experiments show that the method can construct 3D scenes in 1.1×103 ms. This method costs less time compared with traditional hierarchical method and depth-sensing camera method in the same experimental conditions. The method can be also used for 3D visualization either with complex backgrounds.     

Hot compressive deformation behaviors of Mg–10Gd–3Y–0.5Zr alloy

In this paper, the hot compressive deformation characteristics of a Mg–10Gd–3Y–0.5Zr(GW103K) alloy have been investigated by isothermal compression test at the temperature range of 350–450°C and strain rate range of 0.0001–0.1s~(-1). True stress–strain relationships at various strain rates showed the typical strain hardening and softening stage which is indicative of dynamic recrystallization during deformation. The results showed that the peak stress was obviously dependent on temperature and strain rate. A constitutive equation to describe the deformation process was established based on the hyperbolic sine function. The stress exponent n and apparent activation energy Q were determined to be 3.018 and 203.947 k J/mol, respectively. Microstructure investigation showed that dislocation slipping was the dominant deformation mechanism during the hot deformation at all conditions. However, at the temperatures lower than 400 °C and strain rates higher than 0.01 s~(-1), twinning was observed to be activated, which indicated another deformation mechanism. Dynamic recrystallization and dynamic precipitation were found to occur simultaneously under such deformation condition.     

基于LabVIEW的高频焊管红外测温系统设计

高频焊管生产环境复杂,测温环境恶劣,针对此特点,提出使用比色测温法进行高频焊管的温度测量,并介绍高频焊管测温系统的构建过程.红外测温仪具有较强的抗干扰能力和稳定性,实验选用红外测温仪作为传感器构建温度采集监测系统硬件平台;选用LabVIEW软件构建温度采集监测系统软件平台,其具有采集效率和测试精度高,模块小,编程简单等优点.实验证明,基于LabVIEW平台设计的高频焊管红外测温系统能准确测量到高频焊管焊接温度,并且在LabVIEW模块上实现信号的实时显示、存储和分析.     

Three-dimensional FEM analysis of stress distribution in dynamic maxillary canine movement

An alteration in stress/strain distribution within periodontal ligament (PDL) occurs when the tooth is mechanical stimulated in orthodontic treatment. The majority of previous finite element studies were confined to a static evaluation on initial loading status, and a dynamic long-term analysis was rarely performed in orthodontics. The present study sought to analyze the stress distribution patterns within tooth root, PDL, and alveolar bone during dynamic canine tipping and bodily movement with three-dimensional finite element method in four consecutive therapeutic weeks. We observed that the highest stress was on root surface, secondly alveolar bone, and finally, PDL for either tipping or bodily movement. Throughout the PDL and root surface, the highest stress was always around the cervical area in both patterns of movement through four phases. Moreover, a lower and more uniform stress distribution was produced during bodily movement compared with tipping movement. These results indicated that canine translation might be healthier for periodontal tissue than tipping movement; the cervical region bore a greater load and might also be a susceptible area for tissue damage (except for the apex) regardless of movement pattern.     

交互式电子白板在课堂教学中的应用探究

近年来，交互式电子白板作为一种新兴教学工具，在我国基础教育及高等教育中的应用越来越普遍。本文首先对交互式电子白板的定义及其在教学上的优势进行阐述，并进一步对我国交互式电子白板的研究应用现状进行梳理，以期发现和总结我国交互式电子白板研究特点，并对今后交互式电子白板的应用及研究提供一些思考和启示。     

考虑磨削余量分配的齿轮钢磨削工艺优化

以40CrNiMo钢为研究对象,对原有磨削工艺进行优化,探讨减少工作台进给次数、去掉半精磨工艺对磨削质量的影响.结果表明:原有粗磨+半精磨+精磨工艺改为粗磨+精磨两道工艺是可行的,且在保持总磨削余量一定的条件下,通过减少工作台进给次数的方法可以降低粗磨过程多次走刀造成的磨削表面硬化,同时提高了加工效率;粗磨产生的磨削表面硬化对降低半精磨、精磨后的磨削表面粗糙度有利,但表面硬化伴随着磨削亚表层金相组织变化和残余应力等不利因素.