多级雾化超重力旋转床能耗的建模及实验

通过理论分析建立了多级雾化超重力旋转床能耗的数学模型，利用传热强化与过程节能教育部重点实验室开发的多级雾化超重力旋转床设备，采用电度表测量功耗的方法验证了该模型，从实验数据中归纳出了总能耗的计算式。实验结果表明：多级雾化超重力旋转床的能耗受气流量的影响很小，而受液流量、旋转床转速、转子转动方式及转子结构的影响较大；减少转子转动摩擦阻力并选用优良的转动方式可以显著降低总能耗。实验结果证明了多级雾化超重力旋转床能以较少能耗来获取过程传递的极大强化。     

LIQUID DYES''CHARACTERISTICS IN DYEING WASTE PAPER PULP AND THEIR APPLICATION

In this paper, some liquid dyes were used to dye the waste paper pulp (OCC pulp and waste cement sack paper pulp), and their dyeing characteristics were analyzed, The liquid dyes include liquid basic yellow, liquid basic blue, liquid basic red, liquid basic orange, liquid basic brown and liquid direct black. We found that, each dye had its own dyeing characteristic while dyeing the waste paper pulp.Generally different types of liquid dyes were combined to dye the waste paper pulp, which the adding process must be noticed. We also observed that a black pigment could be applied together with said liquid dyes to dye or adjust the color of the bottom sheet for the fireproof board. We could also achieve the same dyeing result through different combinations of different dyes.     

试析民族地区大学英语教学中的“小题大做”

英语教学投入大,收益小,教师任重而道远。针对民族地区高校英语教学现状,结合多年教学经验,作者客观务实地提出教师应见微知著,从教学中的细小环节入手,做出提高大学英语教学质量的大文章来。     

灵魂在高处——郁达夫《故都的秋》解析

郁达夫的作品受争议较多,历年来一直有郁达夫作品难免颓丧消沉的评论。本文以《故都的秋》为例,解析了郁达夫精神世界当中的另一层面。看到他苦闷当中坚守的高尚情操,困境中仍不流于世俗的卓立精神以及对纯朴清淡的生活境界的真诚追求。     

废气再循环阿特金森汽油机经济性优化算法

基于一维整机模型在3 000r·min-1部分负荷工况下对Atkinson汽油机性能进行仿真分析.结果表明,在保持节气门位置、空燃比与点火提前角不变的情况下,随着废气再循环率提升或随着LIVC(late intake valve closing)增大,发动机的油耗均呈现增大趋势.为进一步优化Atkinson发动机燃油经济性,在节气门全开条件下搭建了GT-power与MATLAB联合仿真模型,通过改进的遗传算法,对废气再循环率、进气门晚关角、点火提前角、空燃比等参数进行优化迭代,并对历代种群进行了模糊聚类分析,得出了不同负荷工况点的油耗最优值及对应的控制参数.     

Alkaline digestion behavior and alumina extraction from sodium aluminosilicate generated in pyrometallurgical process

In pyrometallurgical process, Al-and Si-bearing minerals in iron and aluminum ores are easily transformed into sodium aluminosilicates in the presence of Na₂O constituents, which alters the leaching behaviors of Al₂O₃ and SiO₂. It was confirmed that sodium aluminosilicates with different phase compositions synthesized at various roasting conditions were effectively digested in the alkaline digestion process. Under the optimum conditions at temperature of 100-120℃, liquid-to-solid ratio (L/S) of 10:2 mL/g, caustic ratio of 4, and Na₂O concentration of 240 g/L, the actual and relative digestion ratio of Al₂O₃ from the synthesized sodium aluminosilicates reached maximums of about 65% and 95%, respectively, while SiO₂ was barely leached out. To validate the superior digestion property of sodium aluminosilicate generated via an actual process, the Bayer digestion of an Al₂O₃-rich material derived from reductive roasting of bauxite and comprising Na_1.75Al_1.75Si_0.25O₄ was conducted; the relative digestion ratio of Al₂O₃ attained 90% at 200℃.     

A New Algorithm for the Establishing Data Association Between a Camera and a 2-D LIDAR

In this paper,we propose a new algorithm to establish the data association between a camera and a 2-D Light Detection And Ranging sensor （LIDAR）.In contrast to the previous works,where data association is established by calibrating the intrinsic parameters of the camera and the extrinsic parameters of the camera and the LIDAR,we formulate the map between laser points and pixels as a 2-D homography.The line-point correspondence is employed to construct geometric constraint on the homography matrix.This enables checkerboard to be not essential and any object with straight boundary can be an effective target.The calculation of the 2-D homography matrix consists of a linear least-squares solution of a homogeneous system followed by a nonlinear minimization of the geometric error in the image plane.Since the measurement quality impacts on the accuracy of the result,we investigate the equivalent constraint and show that placing the calibration target nearby the 2-D LIDAR will provide sufficient constraints to calculate the 2-D homography matrix.Simulation and experimental results validate that the proposed algorithm is robust and accurate.Compared with the previous works,which require two calibration processes and special calibration targets such as checkerboard,our method is more flexible and easier to perform.     

System deployment optimization in architecture design

Optimization of architecture design has recently drawn research interest. System deployment optimization （SDO） refers to the process of optimizing systems that are being deployed to activi- ties. This paper first formulates a mathematical model to theorize and operationalize the SDO problem and then identifies optimal so- lutions to solve the SDO problem. In the solutions, the success rate of the combat task is maximized, whereas the execution time of the task and the cost of changes in the system structure are mini- mized. The presented optimized algorithm generates an optimal solution without the need to check the entire search space. A novel method is finally proposed based on the combination of heuristic method and genetic algorithm （HGA）, as well as the combination of heuristic method and particle swarm optimization （HPSO）. Experi- ment results show that the HPSO method generates solutions faster than particle swarm optimization （PSO） and genetic algo- rithm （GA） in terms of execution time and performs more efficiently than the heuristic method in terms of determining the best solution.     

苯并[1，2-b：4，5-b’]二噻吩-thieno[3，4-易]thiadiazole导电性的理论研究

采用密度泛函理论，在B3LYP／6—31G（d）水平下，对苯并[1，2-b：4，5-b’]二噻吩（BDT）-thieno[3，4-b]thiadiaz01e（TD）的低聚物和聚合物进行了理论计算．其中，BDT为电子供体，TD为电子受体，以1：2的方式结合形成化合物，并计算了二面角、分子内的电荷传输、桥键键长和中心键电荷密度．结果显示：随着聚合链增长，共轭程度增加．NICSs值显示：中心环比边环的共轭程度更大．聚合物的能带结构表明：该聚合物的带隙比较低（0．87eV），故其可以作为潜在的导电材料．     

Secure pairing with wearable devices by using ambient sound and light

Wearable devices usually work together with smart phones. To ensure only legitimate smart phones can read the data, they must conduct pairing to establish a shared key. Traditional pairing methods require that the pairing devices have a keyboard or screen for user interaction. However, due to the size limitation, keyboards or screens are hard to be installed in the wearable devices. To solve this problem, we propose a novel pairing method by using ambient sound and light. In this new scheme, any pairing request from smart phone will trigger wearable device vibration. Only after users press the confirm key on the device can the pairing process continues. Then pairing devices collect ambient sound and light at the predetermined time and establish a shared key by using the Diffie-Hellman protocol. To protect against potential man-in-the-middle attacks in the key establishment process, an improved interlock protocol with sound and light comparison is conducted to authenticate the key. If both the sound and light collected by the pairing devices are similar enough, the key is accepted. Otherwise, it is rejected. Compared with current context based pairing methods, our scheme does not impose strict synchronization on devices to collect ambient context data. Moreover, our scheme need not collect and exchange contextual information for multiple times to resist offline brute force attacks. The experimental results and security analysis prove the effectiveness of our scheme.