Complementation in the composition of steel slag and red mud for preparation of novel ceramics

A method for preparing novel ceramics was developed in this study. Different ratios red muds were added to steel slags to optimize the preparation of novel ceramics by a traditional ceramic preparation process. The sintering mechanism, microstructure, and performance were studied by X-ray diffraction techniques, scanning electron microscopy, and combined experiments of linear shrinkage, water absorption, and flexural strength. The results confirmed that red mud can reduce the volumetric instabilities through the complementarity of red mud and ferroalloy slag. The crystal phases in the ceramics are all pyroxene group minerals, including diopside ferrian, augite, and diopside. The flexural strength of the ceramic that contains 40wt% red mud and was prepared at the optimal sintering temperature (1140℃) is greater than 93 MPa; its corresponding water absorption is less than 0.05%.     

Leaching behavior of V,Pb, Cd,Cr, and As from stone coal waste rock with different particle sizes

This paper investigates the leaching behavior of heavy metals (V, Pb, Cd, Cr, and As) from stone coal waste rocks with various particle sizes using dynamic leaching experiments. The results show that the dissolved concentrations of V and As initially increased and then slightly decreased as time progressed and that the dissolved concentrations of Pb, Cd, and Cr were high in the early stage before decreasing. The particle size of the stone coal waste rocks strongly influenced the heavy metal concentration in the leaching solutions. The effects of the particle size of the stone coal waste rocks on the dissolved concentrations of V, Pb, and As decreased in the order fine fraction > medium fraction > coarse fraction, and the effects of particle size on the dissolved concentrations of Cr and Cd decreased in the order medium fraction > coarse fraction > fine fraction and coarse fraction > medium fraction > fine fraction, respectively. The quantities of heavy metals dissolved from the stone coal waste rock with fine particle sizes were observed to decrease in the order V (17104.36 μg/kg) > As (609.41 μg/kg) > Pb (469.24 μg/kg) > Cr (56.35 μg/kg) > Cd (27.52 μg/kg), and the dissolution rates decreased in the order As (2.96%) > Pb (0.93%) > V (0.35%) > Cd (0.25%) > Cr (0.01%). The specific surface area, pore size of the stone coal waste rocks, and chemical forms of heavy metals also influenced the release of heavy metals from the stone coal waste rocks. Kinetic analysis showed that the dissolution of heavy metals fundamentally agreed with the rate equation controlled by the shrinking core model. The results of this study are expected to serve as a reference for the evaluation of heavy metals contamination from stone coal waste rocks.     

Microstructural characterization and oxidation resistance of multicomponent equiatomic CoCrCuFeNi-TiO high-entropy alloy

CoCrCuFeNi-TiO was prepared by arc melting of the pure elements and Ti₂CO powder under an Ar atmosphere. Both CoCrCuFeNi and CoCrCuFeNi-TiO alloys are composed of a face-centered cubic (fcc) solid solution, whereas the alloys of CoCrCuFeNi-TiO are basically composed of an fcc solid solution and TiO crystals. The microstructures of CoCrCuFeNi-TiO are identified as dendrite and interdendrite structures such as CoCrCuFeNi. The morphology of TiO is identified as an equiaxed crystal with a small amount of added Ti₂CO. By increasing the amount of Ti₂CO added, the TiO content was dramatically increased and part of the equiaxed crystals changed to a dendrite structure. A test of the oxidation resistance demonstrates that the oxidation resistance of CoCrCuFeNi-TiO is better than that of CoCrCuFeNi. However, as the TiO content increases further, a corresponding decrease is observed in the oxidation resistance.     

Effect of melting temperature on microstructural evolutions,behavior and corrosion morphology of Hadfield austenitic manganese steel in the casting process

In this study, the effect of melting temperature on the microstructural evolutions, behavior, and corrosion morphology of Hadfield steel in the casting process is investigated. The mold was prepared by the sodium silicate/CO₂ method, using a blind riser, and then the desired molten steel was obtained using a coreless induction furnace. The casting was performed at melting temperatures of 1350, 1400, 1450, and 1500℃, and the cast blocks were immediately quenched in water. Optical microscopy was used to analyze the microstructure, and scanning electron microscopy (SEM) and X-ray diffractrometry (XRD) were used to analyze the corrosion morphology and phase formation in the microstructure, respectively. The corrosion behavior of the samples was analyzed using a potentiodynamic polarization test and electrochemical impedance spectroscopy (EIS) in 3.5wt% NaCl. The optical microscopy observations and XRD patterns show that the increase in melting temperature led to a decrease of carbides and an increase in the austenite grain size in the Hadfield steel microstructure. The corrosion tests results show that with increasing melting temperature in the casting process, Hadfield steel shows a higher corrosion resistance. The SEM images of the corrosion morphologies show that the reduction of melting temperature in the Hadfield steel casting process induced micro-galvanic corrosion conditions.     

Mineral-phase evolution and sintering behavior of MO-SiO2-Al2O3-B2O3 (M=Ca,Ba) glass-ceramics by low-temperature liquid-phase sintering

In this work, network former SiO₂ and network intermediate Al₂O₃ were introduced into typical low-melting binary compositions CaO·B₂O₃, CaO·2B₂O₃, and BaO·B₂O₃ via an aqueous solid-state suspension milling route. Accordingly, multiple-phase aluminosilicate glass-ceramics were directly obtained via liquid-phase sintering at temperatures below 950℃. On the basis of liquid-phase sintering theory, mineral-phase evolutions and glass-phase formations were systematically investigated in a wide MO-SiO₂-Al₂O₃-B₂O₃ (M=Ca, Ba) composition range. The results indicate that major mineral phases of the aluminosilicate glass-ceramics are Al₂₀B₄O₃₆, CaAl₂Si₂O₈, and BaAl₂Si₂O₈ and that the glass-ceramic materials are characterized by dense microstructures and excellent dielectric properties.     

A Proof of the Duality of the DINA Model and the DINO Model

The Deterministic Input Noisy Output “AND” gate (DINA) model and the Deterministic Input Noisy Output “OR” gate (DINO) model are two popular cognitive diagnosis models (CDMs) for educational assessment. They represent different views on how the mastery of cognitive skills and the probability of a correct item response are related. Recently, however, Liu, Xu, and Ying demonstrated that the DINO model and the DINA model share a “dual” relation. This means that one model can be expressed in terms of the other, and which of the two models is fitted to a given data set is essentially irrelevant because the results are identical. In this article, a proof of the duality of the DINA model and the DINO model is presented that is tailored to the form and parameterization of general CDMs that have become the new theoretical standard in cognitively diagnostic modeling.     

Generalized Multivariate Gumbel Distributions——Dependence,Aging Properties and Applications

This paper introduces a generalized multivariate Gumbel (GMG) distribution using a survival copula. Various dependence properties of the GMG distribution and some analytical properties of the generators of the GMG distribution are studied. Furthermore, the authors also investigate the dependence behavior of the residual lifetime vector of the GMG distribution. As an illustration, the GMG distribution is applied to fit a real data set.     

A two-dimensional improvement for Farr-Gao algorithm

Farr-Gao algorithm is a state-of-the-art algorithm for reduced Gröbner bases of vanishing ideals of finite points, which has been implemented in Maple as a build-in command. This paper presents a two-dimensional improvement for it that employs a preprocessing strategy for computing reduced Gröbner bases associated with tower subsets of given point sets. Experimental results show that the preprocessed Farr-Gao algorithm is more efficient than the classical one.     

The complexity and on-line algorithm for automated storage and retrieval system with stacker cranes on one rail

This paper considers an on-line scheduling and routing problem concerning the automated storage and retrieval system from tobacco industry. In this problem, stacker cranes run on one common rail between two racks. Multiple input/output-points are located at the bottom of the racks. The stacker cranes transport bins between the input/output-points and cells on the racks to complete requests generated over time. Each request should be accomplished within its response time. The objective is to minimize the time by which all the generated requests are completed. Under a given physical layout, the authors study the complexity of the problem and design on-line algorithms for both one-stacker-crane model and two-stacker-crane model. The algorithms are validated by instances and numerical simulations.     

A New Algorithm for the Establishing Data Association Between a Camera and a 2-D LIDAR

In this paper,we propose a new algorithm to establish the data association between a camera and a 2-D Light Detection And Ranging sensor （LIDAR）.In contrast to the previous works,where data association is established by calibrating the intrinsic parameters of the camera and the extrinsic parameters of the camera and the LIDAR,we formulate the map between laser points and pixels as a 2-D homography.The line-point correspondence is employed to construct geometric constraint on the homography matrix.This enables checkerboard to be not essential and any object with straight boundary can be an effective target.The calculation of the 2-D homography matrix consists of a linear least-squares solution of a homogeneous system followed by a nonlinear minimization of the geometric error in the image plane.Since the measurement quality impacts on the accuracy of the result,we investigate the equivalent constraint and show that placing the calibration target nearby the 2-D LIDAR will provide sufficient constraints to calculate the 2-D homography matrix.Simulation and experimental results validate that the proposed algorithm is robust and accurate.Compared with the previous works,which require two calibration processes and special calibration targets such as checkerboard,our method is more flexible and easier to perform.