Rapid reductive degradation of azo dyes by a unique structure of amorphous alloys

An Fe-based amorphous alloy was found to significantly enhance the reductive degradation of an azo dye in aqueous solution. The surface-area normalized rate constant was up to 2.0 L m-2 min-1 at room temperature,an order of magnitude larger than any previously reported value. The activation energy of the degradation process was calculated according to the Arrhenius equation,and a much lower value than those previously reported was obtained. Valence band measurement indicated that a depressed valence band maximum and a widened empty band were established in the amorphous ribbon. The unique structure of the amorphous alloy is important-it may reduce the activation energy of the degradation process and enhance the activity of the electrons,thus accelerating the degradation process.     

Attentional negativity bias moderated by positive mood arousal

Automatically allocation of more attention to negative stimuli is called emotional negativity bias. An event-related potentials (ERPs) experiment investigated whether or not this bias was altered by positive mood arousal. The results suggested that the attention bias towards negative stimuli was attenuated when positive information was accessible.     

复杂结构井旋转下套管数学模型建立与分析

随着复杂结构井钻井技术发展,井斜角和方位角随着井深复杂变化引起常规套管下入方式难度大,旋转下套管技术可有效解决套管下入的难题,但该方面的理论模拟分析报道较少,增加了旋转下套管技术应用的盲目性和低效性。综合运用软杆和刚杆模型的优点并考虑井眼轨迹对模型计算条件影响,建立了旋转下套管数学模型;结合实例井对比了大钩载荷和模拟的轴向应力,验证了模型的正确性;在此基础上,探讨了常规和不同旋转速度下套管的摩阻,并分析了不同摩阻系数条件下的摩阻分布特征。实例分析表明：相同井深下,旋转下套管摩阻小于常规下套管摩阻,并且旋转速度越快,下套管摩阻越小;当旋转速度分别为15r/min和20r/min时,井底处摩阻降低幅度分别为12.13%和19.17%;造斜率越大,摩阻越高,导致套管下入到指定深度难度加大;钻井液摩阻系数越大,套管下入难度越高;在井深1401.5m,裸眼段摩阻系数分别为0.21和0.29,常规下套管摩阻分别为46.51kN和57.49kN。该模型能准确预测下套管摩阻,对复杂结构井的套管下入具有指导意义。     

考虑地质分层约束的长短期记忆循环神经网络测井曲线重构

延长油田东部裸眼井区早期测井资料普遍只有自然电位（SP）、自然伽马（GR）及梯度电阻率(R2.5)三条曲线,因缺失声波（AC）、地层电阻率（RT）等测井曲线,难以满足精细油藏地质研究需求。东部裸眼井区开发时间长、单井产量低,重新测井缺乏可行性及经济性。采用长短期记忆循环神经网络(Long Short-Term Memory,LSTM)进行缺失测井曲线重构是一种经济有效方法,适用于地层测井序列数据。然而延长油田东部浅层油藏上覆黄土层段测井数据信号干扰大,直接应用模型精度较差。针对此问题,本文采用考虑地质分层约束的LSTM模型进行缺失测井曲线的重构,通过分层数据截取每口井长6层段测井数据作为样本数据,既保留了LSTM模型处理序列数据的优势,同时又避免了上覆黄土层测井数据对模型的干扰。利用裸眼井区完整测井数据进行模型训练优化和验证,讨论了考虑地质分层约束的LSTM测井曲线重构精度,结果表明通过引入地质分层约束,模型重构测井曲线精度更高。应用优化后模型实现裸眼井区50口仅有GR、SP、R2.5三条曲线数据井的AC、RT曲线重构,对50口井的142个射孔段进行二次解释,对比试油解释结论符合率达到89.4%,验证了该方法对测井曲线重构的实用性和有效性。     

乳腺癌脑转移差异表达基因的生物学功能分析

乳腺癌脑转移(breast cancer brain metastasis,BCBM)的发病机制尚未明确。为了探究BCBM的发病机制,对BCBM差异表达基因的生物学功能进行研究并筛选关键调控基因。从基因表达综合数据库(gene expression omnibus,GEO)下载4个BCBM基因表达谱数据(GSE12237、GSE100534、GSE125989以及GSE43837),采用R语言筛选差异表达基因,采用富集分析包括基因本体分析(gene ontology,GO)和京都基因与基因组百科全书分析(Kyoto encyclopedia of genes and genomes,KEGG)进行生物学功能分析,采用STRING和Cytoscape分析蛋白质相互作用网络,采用Kaplan-Meier进行生存分析。结果表明,同时存在于2个及以上基因表达谱数据中的差异表达基因261个,GO分析主要涉及细胞外基质组织、细胞外结构组织等生物过程,细胞外基质结构组成、胶原结合等分子功能,含有胶原的细胞外基质、胶原蛋白三聚物等细胞组分;KEGG分析主要涉及蛋白质消化和吸收、局部黏附等通路。蛋白质相互作用网络分析得到9个关键调控基因,其中,DCN、COL6A1与BCBM的生存率显著相关,可作为潜在的BCBM关键调控基因,并为BCBM分子机制的研究提供思路。     

COMPARISON OF TWO METHODS OF OPERATING THEATRE PLANNING： APPLICATION IN BELGIAN HOSPITAL

Operating Theatre is the centre of the hospital management＇s efforts. It constitutes the most expensive sector with more than 10% of the intended operating budget of the hospital. To reduce the costs while maintaining a good quality of care, one of the solutions is to improve the existent planning and scheduling methods by improving the services and surgical specialty coordination or finding the best estimation of surgical case durations. The other solution is to construct an effective surgical case plan and schedule. The operating theatre planning and scheduling is the two important steps, which aim to make a surgical case programming with an objective of obtaining a realizable and efficient surgical case schedule. This paper focuses on the first step, the operating theatre planning problem. Two planning methods are introduced and compared. Real data of a Belgian university hospital ＂Tivoli＂ are used for the experiments.     

求解DRS多目标优化问题的新颖ε-支配进化算法

首先分析ORS(dominance resistant solutions)多目标优化问题的特点,证明基于Pareto-支配关系的多目标优化问题算法求解该类问题很难收敛.然后,提出一种新的基于ε-支配关系的进化算法-ε-支配进化算法(EDMOEA),给出该算法框架和详细流程.最后,将ε-支配进化算法和NSGA-Ⅱ算法应用于求解一组典型的DRS多目标优化问题和常用的多目标优化测试问题,基于算法的收敛性和Pareto最优解集分布性进行评价和比较分析,表明ε-支配进化算法的有效性.     

Cluster Synchronization in a Complex Dynamical Network with Two Nonidentical Clusters

This paper further investigates cluster synchronization in a complex dynamical network with two-cluster. Each cluster contains a number of identical dynamical systems, however, the subsystems composing the two clusters can be different, i.e., the individual dynamical system in one cluster can differ from that in the other cluster. Complete synchronization within each cluster is possible only if each node from one cluster receives the same input from nodes in other cluster. In this case, the stability condition of one-cluster synchronization is known to contain two terms： the first accounts for the contribution of the inner-cluster coupling structure while the second is simply an extra linear term, which can be deduced by the ＂same-input＂ condition. Applying the connection graph stability method, the authors obtain an upper bound of input strength for one cluster if the first account is known, by which the synchronizability of cluster can be scaled. For different clusters, there are different upper bound of input strength by virtue of different dynamics and the corresponding cluster structure. Moreover, two illustrative examples are presented and the numerical simulations coincide with the theoretical analysis.     

协同仿真技术在行星框架动态优化中的应用研究

行星框架作为行星传动机构的重要零部件,在设计时依然采用传统静强度设计理论,不能充分反映动载荷工况下的动态特征,导致工作过程中发生裂纹、突然断裂的现象,严重影响了行星传动机构的可靠性,给维修和保障带来很大的困难。因此对行星框架进行动态优化设计具有十分重要的意义。以行星轮数目为设计变量,采用基于接口的协同仿真技术作为求解工具,对某任务剖面下的行星框架进行动态结构优化,完善了行星传动设计方法,为设计部门提供有关寿命预测的参考数据。     

Coordinating production and recycling decisions with stochastic demand and return

In this paper, the joint production and recycling problem is investigated for a hybrid manufacturing and remanufacturing system where brand-new products are produced in the manufacturing plant and recycled products are remanufactured into as-new products in the remanufacturing facility. Both the brand-new products and remanufactured products are used to satisfy customer demands. Returns of used products that are recycled from customers are assumed to be stochastic and nonlinearly price-dependent. A mathematical model is proposed to maximize the overall profit of the system through simultaneously optimizing the production and recycling decisions, subject to two capacity constraints — the manufacturing capacity and the remanufacturing capacity. Based on Lagrangian relaxation method, subgradient algorithm and heuristic algorithm, a solution approach is developed to solve the problem. A representative example is presented to illustrate the system, and managerial analysis indicates that the uncertainties in demand and return have much influence on the production and recycling policy. In addition, twenty randomly produced examples are solved, and computational results show that the solution approach can obtain very good solutions for all examples in reasonable time.