A High Speed Detection Scheme for Point Targets in a Multitarget Environment

The purpose of this paper is to develop a high speed detection scheme for moving and / or stationary point targets in a multitarget environment as registered in an IR image sequence. An iterative approximate 3-D line searching algorithm based upon the geometric representation of lines (for non-maneuvering targets in space) in a 3-D space is derived. The convergency of the algorithm is proved. An analysis is performed of the theoretical detection performance of the algorithm. The statistical experiment results show high effectiveness and computational efficiency of the algorithm in the case of low SNR. The idea may be employed to satisfy the real-time processing requirement of an IR system.     

STABILITY CRITERIA FOR A CLASS OF UNCERTAINSYSTEMS WITH TIME—DELAY

Some stability criteria are obtained for a class of uncertain systems with time-delay usingLyapunov functional and analytic techniques. It is easy to check the criteria by making use of theboundedness of the uncertainties.     

Technical Notes ：STUDIES ON THE VALUE OF SECONDARY MARKET TO THE SUPPLY CHAIN

This paper investigates the impact of a secondary market, where retailers can buy and sell excessinventories, on the supply chain. We develop a two-period model with a single manufacturer and tworetailers. At the beginning of the first period the retailers order and receive products from themanufacturer, but at the beginning of the second period, they can trade surplus products betweenthemselves in the secondary market. We investigate the impact of the correlated dependence ofretailers' demand on both the quantity effect and the allocation effect under the secondary market.Lastly,we study potential strategies for the manufacturer to increase sales with the existence of thesecondary market.     

基于弯曲路径的复杂温度场重建算法仿真研究

以最小二乘法温度场图像重建算法为基础以费尔马定理为依据，对声学法工业炉温度场检测中由于声波传播路径弯曲对温度场重建所产生的影响进行了研究，给出一种实现声波路径弯曲补偿的复杂温度场重建算法，通过仿真，考察了该算法对不同温度场分布函数的重建效果，结果表明：该算法不但可实现声波路径弯曲的补偿，而且可同时进行温度场的重建，具有较高的重建精度。     

FROM MANUFACTURING SCHEDULING TO SUPPLY CHAIN COORDINATION：THE CONTROL OF COMPLEXITY AND UNCERTAINTY

With time-based competition and rapid technology advancements, effective manufacturingscheduling and supply chain coordination are critical to quickly respond to changing marketconditions. These problems, however, are difficult in view of inherent complexity and variousuncertainties involved. Based on a series of results by the authors, decomposition and coordination byusing Lagrangian relaxation is identified in this paper as an effective way to control complexity anduncertainty.A manufacturing scheduling problem is first formulated within the job shop context withuncertain order arrivals, processing times, due dates, and part priorities as a separable optimizationproblem. A solution methodology that combines Lagrangian relaxation, stochastic dynamicprogramming, and heuristics is developed. Method improvements to effectively solve large problemsare also highlighted. To extend manufacturing scheduling within a factory to coordinate autonomicmembers across chains of suppliers, a decentralized supply chai     

反应条件及添加惰性物质对三聚甲醛合成反应的影响

研究了三聚甲醛合成过程进料浓度、催化剂用量等对副产物（特别是甲酸）生成行为的影响。结果表明，该体系副产物的生成强烈地依赖于反应时间和催化剂硫酸的用量，而与原料浓度的波动无关。在反应－精馏过程的反应器中添加惰性高沸有机物，可有效地缩短反应物的停留时间，提高三聚甲酸的选择性，大大降低快速反应－精馏过程对反应器的设计要求。     

氢化物发生-原子荧光法测定菊花和大云中的铅

应用AFS—2202a型双道原子荧光分光光度计和断续流动的氢化物发生技术，采用HNO3-H2O2酸性体系和高压釜消解样品，对样品中的铅含量进行了测定。同时，研究了光电管负高压、灯电流、屏蔽气和载气流量、载流的选择、酸度等对实验的影响。在选定实验条件下，铅的检出限为0．08μg／L，标准物质桃叶(GBW08501)的验证结果与推荐值一致，相对标准偏差为1．9％。该方法简便、快速、灵敏，对于实际中药样品的测定得到了满意的结果。     

秋水仙素诱导青虾次级卵母细胞二倍体初探

以青虾卵巢为材料，采用秋水仙素诱导多倍体次级卵母细胞．经滴片试验，确立此实验最佳滴片高度为1．5cm，通过设置5个秋水仙素浓度(0．08～0．40mg／mL)及3个作用时间(6～24h)，观察发生染色体加倍的细胞相对数目．实验结果表明：在使用秋水仙素的浓度为0．08～0．40mg／mL，处理6～24h时都可以获得多倍体卵细胞．在秋水仙素浓度是0．32mg／mL，处理6h可得到最高二倍体突变率(32．58％)．还测试了0．32mg／mL COM作用6h时ATPase活性与生理盐水对照组的变化，结果显示COM会在一定程度上影响细胞的新陈代谢．但是50％左右的成活率表明，这种诱导突变的方法仍具有一定的应用价值．     

岩基静荷试验方法及其适用条件分析

根据反力系统的不同 ,介绍了几种岩基载荷试验方法———堆载平台法、锚杆反力梁法、锚桩反力梁法、护壁反力法、斜壁支撑法等 ,并对其适用条件从经济、安全等方面进行了分析     

PDE-Based Medial Axis Extraction and Shape Manipulation of Arbitrary Meshes

Shape skeletonization （i.e., medial axis extraction） is powerful in many visual computing applications, such as pattern recognition, object segmentation, registration, and animation. In this paper, the authors expand the use of diffusion equations combined with distance field information to approximate medial axes of arbitrary 3D differential properties. It offers an alternative solids represented by polygonal meshes based on their but natural way for medial axis extraction for commonly used 3D polygonal models. By solving the PDE along time axis, this system can not only quickly extract diffusion-based medial axes of input meshes, but also allow users to visualize the extraction process at each time step. In addition, the proposed model provides users a set of manipulation toolkits to sculpt extracted medial axes, then use diffusion-based techniques to recover corresponding deformed shapes according to the original input datasets. This skeleton-based shape manipulation offers a fast and easy way for animation and deformation of complicated mesh objects.