Operator constraint principle for simplifying atmospheric dynamical equations

Based on the qualitative theory of atmospheric dynamical equations, a new method for simplifying equations, the operator constraint principle, is presented. The general rule of the method and its mathematical strictness are discussed. Moreover, the way that how to use the method to simplify equations rationally and how to get the simplified equations with harmonious and consistent dynamics is given.     

Dependence of 6β-acetoxy-7α-hydroxyroyleanone block of Kv1.2 channels on C-type inactivation

Voltage-gated K⁺ (Kv) channels exhibit slow or C-type inactivation during continuous depolarization. A selective pharmacological agent targeting C-type inactivation is hitherto lacking. Here, we report that 6β-acetoxy-7α-hydroxyroyleanone (AHR), a diterpenoid compound isolated from Taiwania cryptomerioides, can selectively modify C-type inactivation of Kv1.2 channels. Extracellular, but not intracellular, AHR (50 μM) dramatically accelerated the slow decay of Kv currents and left-shifted the steady-state inactivation curve. AHR blocked Kv currents with an IC₅₀ of 17.7 μM. AHR did not affect the kinetics and voltage-dependence of Kv1.2 channel activation. Channel block by AHR was independent of intracellular K⁺ concentration. In addition, effect of AHR was much attenuated in a Kv1.2 V370G mutant defective in C-type inactivation. Therefore, block of Kv1.2 channels by AHR did not appear to involve direct occlusion of the outer pore but depended on C-type inactivation. AHR could thus be a probe targeting Kv channel C-type inactivation gate.     

基于仿真的双目标并行机开放车间自适应动态调度

针对工件到达时间与加工时间不确定，且存在紧急工件的并行机开放车间调度问题，以TWC(total weighted completion time)与TWT(total weighted tardiness)为优化目标，设计了一种集成FlexSim仿真模型与NSGA-Ⅱ算法的自适应动态调度方法。该方法以FlexSim模型仿真工件的生成和加工为基础，根据车间实时负荷确定动态调度周期，对紧急工件进行右移重调度，利用NSGA-Ⅱ算法生成双目标优化的调度方案。某晶粒拣选车间生产数据的实验结果表明，相较于利用规则的实时动态调度与固定周期重调度，提出的方法能够在最小化调度偏离度的同时获得满意解。     

Awareness of Residents Regarding the Construction of a Sustainable Urban Community: A Case Study of Action Research in Taiwan

Chung-Sheng Community in Taoyuan City, Taiwan is a typical urban community. By adopting participatory action research, this study examines resident awareness regarding the feasibility of transforming Chung-Sheng Community into a sustainable community. Action research can help avoid constant “trial and error” in constructing sustainable communities and enhance process efficiency. Meanwhile, an active research approach can help communities better achieve sustainable development. Constructing a sustainable urban community requires energy, effective frameworks, and professional assistance. Achieving these requires a continuous and participatory action research process, and careful exploration of the awareness of community residents, which is the focus of this investigation.     

Interdiffusion in the Fe2O3-TiO2 system

Interdiffusion in the Fe₂O₃-TiO₂ system was investigated by the diffusion couple method in the temperature range of 1323 to 1473 K. The diffusion concentration curves of Ti⁴⁺ cations were obtained by electron probe microanalysis, according to which the Boltzmann-Matano method optimized by Broeder was used to calculate the interdiffusion coefficients. The interdiffusion coefficients almost increased linearly with the mole fraction of Ti⁴⁺ cations increasing, and they were in the range of 10^?12–10^?11cm²·s^?1. The increase of temperature could also lead to the increase of the interdiffusion coefficients at a constant concentration of Ti⁴⁺ cations. It was also found that the thickness growth of the diffusion layer obeyed the parabolic rate law.     

市场经济下图书馆的改革

阐述了市场经济条件下图书馆改革的必要性，提出了图书馆进行改革必须明确目的，更新观念，加强立法。     

Topography,structure, and formation kinetic mechanism of carbon deposited onto nickel in the temperature range from 400 to 850℃

The carbon deposition behavior on nickel particles was observed within the temperature range from 400 to 800℃ in a pure methane atmosphere.The topography,properties,and molecular structure of the deposited carbon were investigated using field-emission scanning electron microscopy (FESEM),temperature-programmed oxidation (TPO) technology,X-ray diffraction (XRD),and Raman spectroscopy.The deposited carbon is present in the form of a film at 400-450℃,as fibers at 500-600℃,and as particles at 650-800℃.In addition,the structure of the deposited carbon becomes more ordered at higher temperatures because both the TPO peak temperature of deposited carbon and the Raman shift of the G band increase with the increase in experimental temperature,whereas the intensity ratio between the D bands and the G band decreases.An interesting observation is that the carbon deposition rate is suppressed in the medium-temperature range (M-T range) and the corresponding kinetic mechanism changes.Correspondingly,the FWHM of the G and D1 bands in the Raman spectrum reaches a maximum and the intensities of the D2,D3,and D4 bands decrease to low limits in the M-T range.These results indicate that carbon structure parameters exhibit two different tendencies with respect to varying temperature.Both of the two group parameters change dramatically as a peak function with increasing reaction temperature within the M-T range.     

钠离子电池苯醌电极材料放电平台改性研究

p-Benzoquinone (BQ) is a promising candidate for next-generation sodium-ion batteries (SIBs) because of its high theoretical specific capacity, good reaction reversibility, and high resource availability. However, practical application of BQ faces many challenges, such as a low discharge plateau (~2.7 V) as cathode material or a high discharge plateau as anode material compared with inorganic materials for SIBs and high solubility in organic electrolytes, resulting in low power and energy densities. Here, tetrahydroxybenzoquinone tetrasodium salt (Na₄C₆O₆) is synthesized through a simple neutralization reaction at low temperatures. The four –ONa electron-donating groups introduced on the structure of BQ greatly lower the discharge plateau by over 1.4 V from ~2.70 V to ~1.26 V, which can change BQ from cathode to anode material for SIBs. At the same time, the addition of four –ONa hydrophilic groups inhibits the dissolution of BQ in the organic electrolyte to a certain extent. As a result, Na₄C₆O₆ as the anode displays a moderate discharge capacity and cycling performance at an average work voltage of ~1.26 V versus Na/Na+. When evaluated as a Na-ion full cell (NIFC), a Na₃V₂(PO₄)₃ || Na₄C₆O₆ NIFC reveals a moderate discharge capacity and an average discharge plateau of ~1.4 V. This research offers a new molecular structure design strategy for reducing the discharge plateau and simultaneously restraining the dissolution of organic electrode materials.     

A generalized Norde plot for reverse biased Schottky contacts

When a metal makes intimate contact with a semiconductor material, a Schottky barrier may be created. The Schottky contact has many important applications in the integrated circuit (IC) electronics field. The parameters of such contacts can be determined from their current-voltage (I-V) characteristics. The literature contains many proposals for extracting the contact parameters using graphical methods. However, such methods are generally applicable only to contacts with a forward bias, whereas many Schottky contacts actually operate under a reverse bias. Accordingly, the present study proposed a generalized reverse current-voltage (I-V) plot which enables the series resistance, barrier height, and ideality factor of a reverse biased Schottky contact to be extracted from a single set of I-V measurements. A theoretical derivation of the proposed approach was presented and a series of validation tests were then performed. The results show that the proposed method is capable of extracting reliable estimates of the contact parameters even in the presence of experimental noise.     

多功能超声成像测井仪设计

基于超声脉冲反射法测量原理,设计了一种多功能超声成像测井仪器,并介绍了该仪器测量的具体实现方
法。该仪器在裸眼井中采用成像测量模式可完成井眼内壁高分辨率成像测量;在套管井采用全波测量模式可同时完
成套损检测及水泥胶结质量评价测量。应用该仪器在实际裸眼井及套管井进行了测试,实测资料表明其在裸眼井中
可对井壁进行裂缝、孔洞、层理等地质构造分析;在套管井中可进行套管厚度成像、套管内外径成像及水泥声阻抗成像
等评价。该仪器可对套管腐蚀及第I 界面水泥胶结质量做定量评价。