Research on Yarn Tension under Positive Guiding by Feed Rollers

In the carpet tufting machine,feed rollers are used to guide the yarns positively.After deducing the general Euler formula of yarn tension under positive guide of rollers,a conclusion is got that the tension of yarns at the output side of each roller tends to decrease one by one.Afterwards,a computing formula of wrap angle of yarn passing through the feed roller is deduced by application of triangle geometry method.By analyzing the effect of each parameter on the yarn tension,values of the space between rollers and the roller diameter are proposed for design reference,and relations between the yarn tension and the two key parameters,the friction coefficient of roller surface and the speed of rollers,are illustrated in detail.Consequently,a policy is drawn out to control the yarn tension.The results of this paper provide not only theory foundation for empirical settings of the operational parameters of tufting machine,but also theory support for further research on yarn tension-control methods.     

Improved Adaptive Compression Arbitration System for Wireless Sensor Networks

Previous studies have indicated that data compression in wireless sensor networks is not always beneficial to energy conservation due to the additional computational energy costs. This work gives an energy-efficient arbitration mechanism that enhances the performance of compression algorithms by avoiding unnecessary energy losses. The adaptive compression arbitration system uses a new prediction modeling and adaptation. Tests show that the modeling method gives better predictions with the adaptive mechanism...     

Novel discrimination method of digital deceptive jamming in mono-pulse radar

A new polarization measurement algorithm by using the sum and difference beam differential property of mono-pulse radar is given.Based on the generation mechanism differences between the target scattering and multi-false-target jamming,the signal models of real targets and digital deceptive false target jamming for sum and delta channel are presented.The polarization discrimination parameters are designed,and the discrimination method and its performance are discussed.This novel method does not need the acc...     

形式化方法自动生成测试用例的算法研究

本文提出了一种从形式规格说明中利用等价类划分的方法自动生成软件测试用例的算法,给出了算法步骤.算法设计,并进行了算法分析。最后指出了下一步工作的重点所在。     

含烃废水中硫化物生物氧化的影响因素

采用填充聚氨酯(FPUFS)载体的上流式生物氧化反应器处理含烃废水中的硫化物,考察了曝气量、水力停留时间(HRT)、进水硫化物浓度、pH值和进水石油烃浓度对硫化物生物氧化的影响。结果表明,在曝气量为300mL/min,HRT为90min,进水硫化物浓度<300mg/L,pH值为6.1～7.8的条件下,硫化物去除率在80%以上。在试验考察的石油烃浓度范围内,反应器对总有机碳(TOC)没有明显的去除效果,石油烃对硫化物去除率的影响不超过5%,但硫酸根转化率随石油烃浓度的增加显著下降。     

Multi-Axis Projection Based Giant Component Formation in Random Unit-Disk Graphs

This paper proposes a multi-axis projection (MAP) based giant component formation strategy via the Maximal Independent Set (MIS) in a random unit-disk graph.We focus on the problem of virtual back-bone construction in wireless ad hoc and sensor networks,where the coverage areas of the nodes are disks with identical radii.In the simulation,we show that the MAP-based giant component has the ability to connect most nodes and serves as a backbone in the network.The algorithm is localized and may play an important role in efficiently constructing a virtual backbone for ad hoc and sensor networks.     

基于可控多扫描使能信号的片上系统TR-TC联合测试成本模型

基于片上系统的扫描链结构,针对全速测试研究了多扫描使能（SE）信号的可测性设计,并建立了新颖的测试资源 覆盖率（TR-TC）联合测试成本线性规划数学模型.研究结果表明,该模型不仅可以高效控制全速测试的测试资源消耗以及可测性设计复杂度,而且还可以确立SE信号数量的最优上限,进而避免了以盲目提升SE信号数量来提高转换故障覆盖率的纯理论方式,使面向片上系统全速测试的多SE信号可测性设计方法有一个可靠的目标控制值.     

一种基于泊松分布的提高X射线脉冲星脉冲轮廓信噪比的方法

论述了X射线脉冲星辐射模型和脉冲轮廓构造算法,提出了以Kullback-leibler距离函数作为评价标准,提高具有泊松分布规律的X射线脉冲星脉冲轮廓信噪比的平滑算法,推导了平滑参数和平滑累积脉冲轮廓的计算公式.搭建了X射线脉冲星导航地面模拟系统,实现了对模拟X射线脉冲星单光子到达时间的记录及X射线脉冲星脉冲轮廓的构造,得到了X射线脉冲到达时间TOA.在X射线脉冲星导航地面模拟系统上,对平滑算法进行了验证,结果表明该算法对于提高累积脉冲轮廓的信噪比效果显著,信噪比提高大于10dB.     

保护医学——一个正在兴起的交叉学科

保护医学作为一门新兴的交叉学科已受到广泛瞩目。保护医学涉及人类健康、动物健康和生态系统健康3个层面,它们构成有机的整体,相互影响,相互作用,缺一不可。保护医学研究的最终目标是实现生态的健康,这是保证包括人类在内的生命健康的根本前提。它强调健康与生态、环境之间的联系,体现了多学科的交叉,如人类健康和公共卫生、流行病学、兽医学、毒物学、生态学和保护生物学等,而且其研究方法也体现出多学科交叉的特点。     

致密砂岩储层近井区启动压力梯度的存在原因探讨

研究了低渗透油气藏近井区启动压力梯度的存在原因.以安塞油田王窑区致密砂岩储层为例1,在对岩心进行渗透率与有效压力实验的基础上,研究了渗透率对有效压力的敏感性、渗透率的大小与有效压力的敏感性关系.研究表明,存在层理缝或微裂缝时,渗透率在低有效压力下变化特别明显.岩心在净围压的重复变化过程中均具有一定的塑性;在低渗透油气藏近井区储集层的岩石形变在矿场上明显存在,这可能是导致近井区启动压力梯度的主要原因,某些开采特征与流动现象可用近井区岩石形变来解释.通过致密储层压力敏感性机理分析,建立了具有启动压力梯度特征的渗流理论模型.