提高铝电解槽磁场计算精度的研究

本文讨论了计算铝电解槽磁场的各种数学模型,指出了等效数学模型存在的问题及其在计算中产生误差的原因,提出了提高磁场计算精度应采用实际数学模型,即按母线的实际形状计算各载流母线产生的磁场.     

AlF和AlCl静电势的量子化学研究

本文报导用量子化学从头计算程序MQM81和分子静电势计算程序ESP所作的AlF和AlCl的计算,优选了它们的平衡构型,得到了分子轨道能级、偶极矩、集居数等一系列分子结构的信息。在此基础上计算了这两个分子的静电势。计算结果提出了AlF(或AlCl)双分子反应的一种可能性。     

大气折射反演和近地面反常折射现象的研究

本文介绍Fraser等人提出的反演方法和有关解非线性方程组的迭代方法,并对模拟大气折射实验进行反演计算。模拟实验很好地反映了大气中反常折射分布的情况。反演结果说明反演方法的正确性,这种反演方法将用于对蓬莱海滋现象的折射反演。     

c-补空间及其性质初探

本文首先给出了c-集的概念，然后在有限补拓扑空间及可数补拓扑空间的基础上引入了c-补拓扑空间的概念并对其性质进行了初步探讨。给出了三条引理，证明了一条预备定理与十一条定理。     

天津市高新技术产业发展的特色及策略研究

系统的分析了天津市高新技术产业发展的现状及特色,并指出在发展过程中存在的约束条件和突出问题;在此基础上,提出了促进高新技术产业发展壮大,使天津从“生产型城市”向“创新型城市”转变的对策建议。     

Model Checking Workflow Net Based on Petri Net

The soundness is a very important criterion for the correctness of the workflow. Specifying the soundness with Computation Tree Logic （CTL） allows us to verify the soundness with symbolic model checkers. Therefore the state explosion problem in verifying soundness can be overcome efficiently. When the property is not satisfied by the system, model checking can give a counter-example, which can guide us to correct the workflow. In addition, relaxed soundness is another important criterion for the workflow. We also prove that Computation Tree Logic ＊ （CTL ＊ ） can be used to character the relaxed soundness of the workflow.     

不同应力应变状态下弹性软体的摩擦特性

为了揭示弹性软体在动态作用力下的摩擦特性,分别以45钢模具和45钢小球、硅橡胶模具和有机玻璃(PMMA)小球、聚四氟乙烯模具和聚四氟乙烯小球为对偶件,对弹性软体(兔小肠)不同应力应变状态下的摩擦特性进行研究.以45钢模具和45钢小球为对偶件的摩擦试验表明:小肠平均摩擦系数随径向应变呈类周期性变化,表现为随着径向应变的增加而变大.以柔性材料硅橡胶模具和PMMA小球为对偶件的摩擦试验表明:径向应变情况下,随着法向载荷的增加,平均摩擦系数呈增加趋势.以聚四氟乙烯模具和聚四氟乙烯小球为对偶件的摩擦试验表明:轴向应变情况下,随着法向载荷的增加,平均摩擦系数呈减小趋势.     

An investigation on terahertz response in electro-optic crystals excited at 1.03 lm wavelength

We theoretically investigate terahertz(THz)emission and detection from h110i-oriented electro-optic(EO) crystals adapted for Yb-doped femtosecond pulse laser.According to the principles of phase-matching condition, the dispersion relation between optical velocity and THz pulse,THz absorption spectra, and coherence lengths of CdTe, GaP,and GaAs crystals below the phonon resonant frequency are calculated correspondingly. The optical rectification and EO sampling process of above crystals with the same thickness of0.1 mm are simulated. As a consequence, we found that the optimal emission frequency of CdTe is at 2.65 THz, however,it reaches 6.56 THz of GaAs and 4.77 THz of GaP. With the help of frequency response function, the calculated cut-off frequency of CdTe is only 3.45 THz, while GaAs and GaP achieve 7.15 and 6.37 THz correspondingly. Finally, the EO sampling sensitivity of GaAs is higher than CdTe and GaP when the crystal's thickness exceeds 1.58 mm. The strong THz absorption of CdTe saturates distinctly the EO sampling sensitivity with its thickness increasing.     

载体SiO2表面修饰对钒基催化剂丙烷氧化脱氢催化性能的影响

用ＸＲＤ,Ｒａｍａｎ,ＦＴ－ＩＲ,＾５１Ｖ－ＮＭＲ,Ｐｙ－ＩＲ和ＴＰＲ－ＴＰＯ表征ＳｉＯ２或ＳｉＯ２上预负载ＭｇＯ后负载的钒氧化物催化剂体系。ＳｉＯ２上直接负载钒氧化物,在钒负载量约为５ｗｔ％Ｖ２Ｏ５时出现Ｖ２Ｏ５晶相,而预负载ＭｇＯ在相同钒含量时则没有出现Ｖ２Ｏ５晶相,表面预负载ＭｇＯ促进了钒氧化物在载体表面的分散。