Development of the CAS-IBB single-particle microbeam for localized irradiation of living cells

A single-particle microbeam facility has been constructed at the Key Laboratory of Ion Beam Bioengineering (LIBB), Chinese Academy of Sciences (CAS). The system was designed to deliver a defined numbers of hydrogen ions, produced by a van de Graaff accelerator, in an energy range of 2.0-3.0 MeV, into an area smaller than that of the nucleus of an individual living cell. The beam is collimated by a borosilicate glass capillary that forms the beam-line exit. An integrated computer program recognizes the cells and locates them one by one over the microbeam exit for irradiation. We present technical details of the CAS-LIBB microbeam facility, particularly on the collimator, hardware, control program, as well as cell irradiation protocols available. Various factors contributing to the targeting and positioning precision are discussed along with accuracy measurement results.     

Experimental Study and Numerical Simulation of the Casting-Forging Complex Near Net Forming of Alternator Claw-pole

As a newly developed precision technology, casting-forging complex near net forming process is utilized to produce complex components with a short lead time, low cost and high precision, thus to accelerate the response speed of the market and enhance the competitive power of products. In this paper, the casting-forging complex near net forming process of alternator claw pole was developed and investigated with a combination of experimental and numerical simulation method. Qualified near net workpiece was manufactured, mechanical parameter and relative field information during the forming process was also obtained. While the alternator claw-pole is processed with this technology, the forming force is small, the process is short and the quality of forgings is perfect. Therefore, the complex casting-forging near net forming process of claw-pole is an energy and material saving technology, which will have a vast developing and application prospect in the future.     

灵魂在高处——郁达夫《故都的秋》解析

郁达夫的作品受争议较多,历年来一直有郁达夫作品难免颓丧消沉的评论。本文以《故都的秋》为例,解析了郁达夫精神世界当中的另一层面。看到他苦闷当中坚守的高尚情操,困境中仍不流于世俗的卓立精神以及对纯朴清淡的生活境界的真诚追求。     

Soil Erosion on a Slope without Vegetation： a Simulating Experiment on a Bare Land in Mt. Tanakami

0　IntroductionManystudieshavebeendoneonthesedimentdischargeinMt.Tanakami .Thosestudiesconcerntheamountofsedi mentsandfewdiscussionsabouttheprocessonly .Andthesedi mentyieldmechanismindevastatedslopeinMt.Tanakamiisnotfullyunderstood.Inordertorecordthewholeprocessofsoilero sionfromthebeginningofprecipitation ,totheendofsedimentmovement,asimulatingexperimentbyusingartificialrainiscon ducted .Basedonthisexperiment,andbyfurthercomparingwiththepreviousdataofsedimentsinthisarea,somebasicdataaboutc…     

Study and Application of Internal Coating Technique to Drag Reduction of the Trunk Pipeline for the West-East Gas Pipeline

Coverage layer coated in the internal wall of pipeline enables the friction drag to be reduced, the throughput and the gas transmission efficiency to be increased, the frequency of pigging and the number of the intermediate compressor station to be reduced, and the power consumption of the compressor to be decreased etc. The drag reduction is a high advanced scientific technique with outstanding economical benefit. The study and application of internal coating technique for drag reduction of 4000km trunk pipeline in West-East gas transmission pipeline (WEGTP) project are described, in which the main points are the drag reduction principle, coating process and the indoor study of this technique with own-decided knowledge property right at home.     

基于银薄膜/荷叶SERS效应直接检测婴儿配方奶粉中三聚氰胺

以天然荷叶为衬底,结合真空磁控溅射法沉积银薄膜,制备出了一种高效的表面增强拉曼散射(SERS)活性基底.研究发现银/荷叶基底对婴儿配方奶粉中掺杂的三聚氰胺(MA)表现出良好的识别能力,而不需作额外的样品预处理.对掺杂不同浓度三聚氰胺的奶粉溶液进行定量分析,在5~50 mg/L质量浓度范围内获得了较好的线性关系(线性相关系数R20.99).根据3σ准则,检测极限估计为1 mg/L.此外,银/荷叶基底具有良好的均匀性和重复性(相对标准偏差为7.64%和10.54%).该方法对婴儿配方奶粉中三聚氰胺的检测具有简单快速、成本低且无损等优点.     

铕掺杂氧化钇的密度泛函第一性原理研究

基于第一性原理密度泛函,开展了氧化钇(Y_2O_3)的晶体结构和电子性质的计算研究,对比实验结果验证了计算方法的可行性.通过超元胞模型的密度泛函计算,探究了氧化钇主要本征点缺陷和不同格点阳离子铕(Eu)取代掺杂的形成能.结果表明,富氧条件有利于Eu杂质原子掺入氧化钇晶格,低费米能条件下,Eu原子易于取代周围6个O原子具有中心反演对称性的钇原子;在高费米能条件下,杂质原子对两种格点钇原子取代几率相等.本研究对于提升Eu掺杂氧化钇的发光效率具有一定的指导意义.     

Microstructure and corrosion behavior of Al<Subscript>3</Subscript>Ti/ADC12 composite modified with Sr

In this study, we investigated the effect of the addition of Sr (0wt%, 0.1wt%, 0.2wt%, and 0.3wt%) on the microstructure and corrosion behavior of Al₃Ti/ADC12 composite by optical microscopy, X-ray diffraction, scanning electron microscopy, and energy diffraction spectroscopy. The results reveal that the α-Al phases were nearly spherical and 40 μm in size and that the eutectic Si phases became round in the composite when the Sr content reached 0.2wt%. The Al₃Ti particles were distributed uniformly at the grain boundary. The results of the corrosion examination reveal that the Al₃Ti/ADC12 composite exhibited a minimum corrosion rate of 0.081 g·m–2·h–1 for an Sr content of 0.2wt%, which is two thirds of that of unmodified composite (0.134 g·m–2·h–1). This improved corrosion resistance was due to galvanic corrosion, which resulted from the low area ratio of the cathode to anode regions. This caused a low-density corrosion current in the composite, thereby yielding optimum corrosion resistance.     

Microstructural characterization and oxidation resistance of multicomponent equiatomic CoCrCuFeNi-TiO high-entropy alloy

CoCrCuFeNi-TiO was prepared by arc melting of the pure elements and Ti₂CO powder under an Ar atmosphere. Both CoCrCuFeNi and CoCrCuFeNi-TiO alloys are composed of a face-centered cubic (fcc) solid solution, whereas the alloys of CoCrCuFeNi-TiO are basically composed of an fcc solid solution and TiO crystals. The microstructures of CoCrCuFeNi-TiO are identified as dendrite and interdendrite structures such as CoCrCuFeNi. The morphology of TiO is identified as an equiaxed crystal with a small amount of added Ti₂CO. By increasing the amount of Ti₂CO added, the TiO content was dramatically increased and part of the equiaxed crystals changed to a dendrite structure. A test of the oxidation resistance demonstrates that the oxidation resistance of CoCrCuFeNi-TiO is better than that of CoCrCuFeNi. However, as the TiO content increases further, a corresponding decrease is observed in the oxidation resistance.     

竖向偏心荷载作用下吸力桶荷载-变形特性非共轴本构数值分析

在竖向偏心荷载作用下建立吸力式桶形基础数值分析模型,采用砂土非共轴弹塑性本构模型研究土体主应力方向旋转和非共轴角度的变化规律,探讨非共轴特性对吸力桶力学特性的影响.主要研究结论表明:在地基变形过程中,非共轴角度呈现先增大后减小的发展趋势.随着偏心距的增加,等效塑性应变在地基中的分布范围逐渐减小,非共轴特性也将减弱,非共轴特性对荷载-变形特性的影响逐渐减弱.对于桶壁端部阻力和桶壁外侧摩擦阻力,非共轴特性的影响随着偏心距的增加而减弱.对于桶体顶部阻力和桶壁内侧摩擦阻力,非共轴特性的影响随着偏心距的增加而逐渐显著.