分级多孔纳米炭纤维的结构及电容性能

以酚醛树脂为碳源、PVP为纺丝助剂、纳米MgO颗粒为模板剂,通过静电纺丝法制得酚醛树脂基纳米炭纤维,经过炭化、KOH活化、酸洗后得到分级多孔纳米炭纤维,利用SEM、XRD、XPS、拉曼光谱仪及氮气吸脱附实验,对所制多孔纳米炭纤维的结构和形貌进行表征,并将其作为模拟电容器的电极,利用循环伏安、恒电流充放电及交流阻抗方法测试了材料的电化学性能。结果表明,KOH活化引入了数量可观的微孔,所得纳米炭纤维表现出明显的"微孔-中孔-大孔"分级孔分布的特点,其比表面积达到1058.4m~2/g,总孔容为1.64cm~3/g。电化学测试结果表明,所制分级多孔纳米炭纤维在6mol/L KOH电解液中显示出优异的电容性能,在0.2A/g的电流密度下,其放电比容量达到198F/g,在20A/g电流密度下,电容保持率达到65%。     

中间相沥青基介孔炭的表征及其用作锂离子电池负极材料的电化学性能

以中间相沥青为碳源、CaCO_3为模板,制备中间相沥青基介孔炭(MPMC)。采用XRD、SEM、TEM等手段表征所制介孔炭的结构和形貌,并将其用作锂离子电池的负极材料,测试电化学性能。结果表明,所制MPMC具有丰富的介孔结构和较大的比表面积及孔体积,随着CaCO_3质量分数的增加,MPMC的比表面积和孔体积先增加后减小,当CaCO_3的质量分数为70%时,所制MPMC的比表面积和孔体积最大;MPMC用作锂离子电池负极材料具有良好的电化学性能,能有效提高锂离子电池的可逆比容量,具有良好的循环稳定性和倍率性能。     

Preparation and performance of a cold gas dynamic sprayed high-aluminum bronze coating

By mixing preheated high-aluminum bronze powders with different amounts of Al₂O₃ powder, a low-pressure cold-sprayed coating was prepared and sprayed onto a Cr12MoV steel substrate. The hardness of the coating and the bonding strength between the coating and the substrate were tested with a HV-1000 microhardness tester and a mechanical universal testing machine. The surface microstructure, cross-section and tensile fracture surface of the coating were observed with a scanning electron microscope (SEM). Correspondingly, the influences of the preheat treatment temperature of the bronze powder and the Al₂O₃ content on the coating performance were investigated. The results indicate that the hardness of bronze powders decreased and the coating deposition rate increased after the preheating treatment of the bronze powder. The Al₂O₃ content in the mixed powders contributed to the deformation of bronze powders during the spraying process. This trend resulted in varied performance of the coating.     

南方地区局部地面供暖舒适性及节能性研究

采用环境测试、主观问卷和能耗模拟相结合的方式,研究冬季局部地面供暖方式下人体舒适性以及能耗情况.在14、16、18℃背景温度下的人工环境实验室内,测试了20位受试者的热感觉、热舒适、热可接受以及相应的局部地面供暖能耗.实验结果表明:在14℃时,使用局部地面供暖后受试者的舒适性显著提高,在16、18℃时,使用局部地面供暖能满足90%以上受试者舒适性要求且所需能耗很低.模拟结果表明:相比设定温度为20℃的空调系统能耗,采用局部地面供暖对西南、华东与华中地区节能效果明显,在华南地区节能率最高.因此,局部地面供暖可以作为一种适用于南方地区的提高舒适性和节能性的采暖方法.     

郑洛新国家自主创新示范区信息协同研究

在信息生态环境下,信息资源日益成为一种战略性资源。本文在郑洛新国家自主创新示范区背景下,运用信息协同视角分析对示范区发展的影响因素,并最终得出信息协同之于"郑洛新"的有益影响。文章最后以郑洛新示范区如何构建信息协同模式为总结,提出了同构管理信息系统、智能云平台建设、新型数据管理技术应用等相关建议。     

经济学实验课程设计的探索性研究

在经济学教学中引入实验方法是经济学教学手段改革的重要内容,开设经济学实验课程已成为经济学教学改革的必然。文中阐述了经济学实验内涵和意义,对经济学实验课程设计的过程和方法进行了分析。以完全信息静态博弈实验为例,对经济学实验课程的设计进行了探索,并明确指出经济学实验课程设计中应注意的问题。     

Effects of Cr and Mo elements on the microstructures and compressive properties of the in situ (TiC_xN_y–TiB_2)/Ni cermets

In-situ(TiC_xN_y–TiB_2)/Ni cermets with 70 wt%TiC_xN_y–TiB_2 were successfully fabricated by combustion synthesis and hot pressing sintering in Ni-Ti-B_4C-BN powder systems.The microstructures,density,compressive properties,and hardness of the TiC_xN_y–TiB_2/Ni cermets with the addition of 0–8 wt%Cr/Mo to the Ni-Ti-B_4C-BN powder systems were compared and analysed.The results showed that the ceramic particles distributed uniformly in the cermets,and the size of the ceramic particles reduced with the Cr/Mo addition.Both Cr and Mo addition can improve the hardness,compressive properties,and fracture strains of the cermets.The hardness,compressive strength,and fracture strain of the(TiC_xN_y–TiB_2)/(Ni+Cr)cermets increased from 1561 HV,2.94 GPa,and 2.9%to 1864 HV,3.65 GPa,and 3.4%,respectively when the Cr content increased to 5 wt%.The hardness and compressive strength of the(TiC_xN_y–TiB_2)/(Ni+Mo)cermets increased from 1561 HV and 2.94 GPa to 1902 HV and 3.43 GPa,respectively when the Mo content increased to 8 wt%.The cermets with Cr had better compressive properties than the cermets with Mo.     

Systemic Design for Applying the Combined Use of SSM and CDA to Social Practices

In this paper, we propose a framework for applying the combined use of soft systems methodology (SSM) and critical discourse analysis (CDA) based on social semiotic systemic functional linguistics to social practices. In the social practice, ‘participation’ mode of Checkland’s SSM is used for ‘problem-solving’ whilst CDA is used to problematize ‘problem-solving’ processes within the practice. During the meta-process of problematization of our research, we used Churchman’s systems approach and its theory of ‘boundary critique’ in order to explore issues such as governance, inequality of power, and social values within the organization examined for this study. In other words, the process-oriented methodology proposed in this paper consists of two processes: that of ‘problem-solving’ based on SSM and of problematization of naturalized discourse from the perspective of CDA and two phases of boundary critique in social practice. A detailed account of a case study of Korean social enterprise is given to demonstrate how our proposed framework of the combined use of SSM and CDA is applied into practice. Reflecting the outcome of the case study, this paper argues that critical social research from systemic inquiry using what we call ‘process-oriented methodology’ is useful to address some of the social and complex issues related to understanding dynamic relation between power and discourse amongst participants in the social enterprise in Korean contexts.