灰铸铁的应力屈服曲面及其三维热弹塑性应力解析

对原有的灰铸铁件应力屈服曲面进行了合理的简化,使其在理论上合理,工程应用上更为方便。建立了灰铸铁件三维非稳态热弹塑性应力场的有限元方法。以灰铸铁哑铃件为对象,用新屈服曲面对其应力发展过程进行了模拟,且比较了用新旧屈服面计算得到的结果。     

微波与生物组织的相互作用及微波理疗中若干实际考虑

本文论述了描述微波与生物组织相互作用的数学表达式,讨论工作频率选择、透入深度、反射、极化、泄漏及防护等实际问题。     

Choroidal and iris angioarchitecture of the newt: A scanning electron-microscopic study of vascular corrosion casts

The corrosion cast technique provided for the first time an excellent three-dimensional visualization of the vascular pattern of the choroid and iris in the newt eye. The results show the presence of a single arterial afference to the choroidal and iris capillaries: the ophthalmic artery is the origin fo both ciliary arteries and the long posterior ciliary artery. Slightly behind the equatorial circumference of the eyeball the venous drainage consists of a single vessel on the dorsal side and two distinct vessels on the ventral one. It receives blood from both iris and choroid. The surface of the plastic endocasts shows some details of fine luminal structures of the endothelial cells. Shallow depressions may be regarded as imprints of endothelial cell nuclei, and they are distinctly different for arteries and capillaries. The angioarchitecture of the newt eye differs from that of brain in that hairpin-shaped capillary loops are not observed at all.     

STUDY ON POLYPYRROLE-VISCOSE CONDUCTING FIBER

The conductivity of Polypyrrole-viscose conducting fiber prepared with author's method can be shown up to as high as 2.106x10~(-2) S/cm. The main factors influencing the conductivity are the concentration of FeCl_3 used as dopant and initiator, the treatment time of viscose fiber as base material in FeCl_3 solution, temperature and polymerization time. It is found that the orientation and crystallization degree of viscose fiber keep constant before and after conducting treatment and the mechanical properties of conducting fiber is the same as that of base material. In addition, the distribution of polypyrrole in viscose fiber, and its effect on the conductivity were investigated in details by TEM.     

弧焊机器人控制系统

本文介绍一种二级计算机控制的弧焊机器人控制系统。在考虑相邻关节影响的条件下，对弧焊机器人控制系统的硬件电路和控制方法进行了分析和设计．     

理想非线性单组分色谱模型理论解与实验的比较

用气相色谱的分析方法研究了理想非线性单组分不同温度下的流出曲线，用＂特征点＂法回归出了各组分的物理常数Ｇ和ｂ，代入理论模型公式，并与实验结果进行子比较。     

小麦群体连续选择效应的综合分析

本试验对由信谷核不育基因构成的异效群体内４个性状进行连续两轮歧化选择，并将所得数据进行群体综合分析。结果表明：整个群体的平均表现和变异程度未发明显变化；但群体分布状况有一定改变，尤其是每穗粒数的分布数化较为明显；株高和千粒重的有效因子数估计基本符合小麦遗传实际表现，每穗粒数的有效有效因子数估计略低，说明此性状遗传背景较为简单。     

某些椭圆算子基本解之间的关系

本文在适当的假设下.给出了某些变系数椭圆算子基本解间的一些关系.可用来研究一些椭圆算子解的性质.     

非线性系统两变量控制下的分枝特性

采用分枝理论推导非线性系统两变量P和PI控制下的分枝特性,所导得的几个定理阐明了简单分枝点和Hopf分枝点的位置和性质。一个简化精馏塔模型用于演示这一过程,展示出精馏塔系统在闭环时,可能出现多态和极限环。     

梯形水平折梁的内力分析

本文对梯形水平折梁（０≤α＜∏２）和矩形水平折架（α＝∏２）用最小余能原理进行了内力分析，并导出了相应的计算公式，可在工程结构设计中采用