仿生非光滑花纹沟对轮胎抗滑水性能的影响

以205/55R16乘用车轮胎为研究对象,采用计算流体动力学建立了考虑胎面花纹变形的轮胎滑水分析模型;以气-液二相流数值模型分析了轮胎的滑水性能,并将临界滑水速度仿真值与NASA滑水速度预测值及轮胎发生滑水时力平衡下的速度进行对比.在此基础上,引入仿生减阻理念,研究了夹角为60°、高度为0.6mm的仿生对称V形结构对花纹沟排水量和水流阻力的影响,并将其结构特征信息等效移植到接地区轮胎花纹沟底,进行了仿生花纹轮胎的滑水性能分析.结果表明:所建滑水分析模型可用来分析轮胎滑水时的流体运动特性;相对原花纹轮胎,仿生非光滑花纹沟轮胎通过提高接地区花纹沟内水流速度,降低了胎面动水压力,提高了临界滑水速度.     

Constructing and evaluating core inflation measures from component‐level inflation data

This paper undertakes a comprehensive examination of 10 measures of core inflation and evaluates which measure produces the best forecast of headline inflation out‐of‐sample. We use the Personal Consumption Expenditure Price Index as our measure of inflation. We use two sets of components (17 and 50) of the Personal Consumption Expenditure Price Index to construct these core inflation measures and evaluate these measures at the three time horizons (6, 12 and 24 months) most relevant for monetary policy decisions. The best measure of core inflation for both sets of components and over all time horizons uses weights based on the first principal component of the disaggregated (component‐level) prices. Interestingly, the results vary by the number of components used; when more components are used the weights based on the persistence of each component is statistically equivalent to the weights generated by the first principal component. However, those forecasts using the persistence of 50 components are statistically worse than those generated using the first principal component of 17 components. The statistical superiority of the principal component method is due to the fact that it extracts (in the first principal component) the common source of variation in the component level prices that accurately describes trend inflation over the next 6–24 months.     

城市治理首要应加强市民的思想道德建设——以湛江市治理交通秩序为例

交通混乱既影响城市形象,又制约经济发展。本文通过对湛江市区交通混乱现象进行深入调查研究,认为要从根本上改变这一现状,取得长效成果,除了采取行政立法、经济处罚、改善交通基础设施等治理措施外,还应着重加强市民的道德建设,提高其思想道德素质,培养市民良好的社会道德行为习惯。文章旨在为加强湛江市民道德建设,解决湛江及其它城市突出交通问题提供参考。     

关于二面体群的共轭类长素图

讨论二面体群的结构问题,利用GAP软件给出二面体群D2n的共轭类长素图,并完整给出当n以及n/2分别是奇数和偶数时的共轭类长素图情况.     

基于Sinc插值与相关谱的纵横波速度比扫描方法

在多分量地震技术中，准确地求取出纵、横波速比（γ）是多分量资料处理、反演、解释各环节中的一个重要步骤。由于地下同一层位具有相同的波阻抗比，因此该层位的反射纵波和反射转换波相互关联，纵横波速比与时间比存在相互转化关系。基于Sinc插值算法与相关系数谱分析的纵横波速比扫描方法是通过设置一系列γ，利用Sinc插值算法将纵波拉伸后与转换波进行互相关，当互相关系数达到最大时即可求出相应的γ。理论数据和实际资料的测试，验证了该方法的有效性、准确性和实用性。     

利用SRTM数据修测高山区地貌的探讨

在高海拔区域测制地形图,如青藏高原地区,所获取的遥感影像局部存在着大范围的高山阴影或云雪覆盖,造成立体观测地貌困难的现象,探讨应用SRTM数据对这类特殊区域地貌进行修测补绘。介绍了数据处理的作业过程,并对实验区SRTM与SPOT5影像立体测图成果进行实验对比分析,成果符合要求。     

A Layer-Stripping Method for 3D Near-Surface Velocity Model Building Using Seismic First-Arrival Times

In order to improve the efficiency of 3D near-surface velocity model building, we develop a layer-stripping method using seismic first-arrival times. The velocity model within a Common Mid-Point (CMP) ...     

避孕压力为啥由女性承担

<正>也不是没人研究过男性避孕药,只是面对这"野火烧不尽,春风吹又生"的精子们,科学家们绞尽脑汁却依旧所获不多。避孕,是男女两个人的事,但在选择避孕方式上,女性安装宫内节育器的比例要比男性做输精管结扎术的比例大得多,市面上的避孕药品也几乎都偏向于女性。像宫内节育器这样的避孕措施对女性的伤害还真不小。最可怕的是有很多女性即使带上宫内节育器还会有怀孕的情况,而这样的情况往往会导致宫外孕。     

An Economic Model-Based Matching Approach Between Buyers and Sellers Through a Broker in an Open E-Marketplace

A broker in an open e-marketplace enables buyers and sellers to do business with each other. Although a broker plays an important role in e-marketplaces, theory and guidelines for matching between buyers and sellers in multi-attribute exchanges are limited. Therefore, a challenge for a broker’s responsibility is how to maximize a buyer’s total satisfaction degree as its goals under the consideration of trade-off between a buyer’s buying quantity and price paid to a seller, and other attributes. To solve this challenge, this paper proposes an economic model-based matching approach between a buyer’s requirements and a seller’s offers. The major contributions of this paper are that (i) a broker can model a seller’s price policy as per a buyer’s buying quantity through communication between a broker and a seller; (ii) due to each buyer’s different quantity demand, a broker models a buyer’s satisfaction degree as per a buyer’s buying quantity based on communication between a broker and a buyer; and (iii) to carry out a broker’s matching processes, an objective function and a set of constraints are generated to help a broker to maximize a buyer’s total satisfaction degree. Experimental results demonstrate the good performance of the proposed approach.