基于TSV的3D IC层次化物理实现技术

随着集成电路特征尺寸逼近物理极限,硅通孔（TSV）实现层间互连的三维集成电路（3D IC）成为延续摩尔定律的一种趋势.但现有集成电路设计工具、工艺库、设计方法尚不成熟,难以实现三维集成中超大尺寸基板芯片的时序收敛问题.为此,本文提出了一种利用现有传统的EDA工具完成基于TSV的3D IC物理设计的流程.首先,用热应力模型将三维硅通孔投影成二维阻挡层,从而将三维集成电路设计转化成若干含阻挡层的二维集成电路分别实现;其次,针对超大尺寸基板芯片的时序收敛困难问题,提出了一种标准单元布局方法,通过在版图中划定若干固定放置区用于限定关键时序单元的摆放,并迭代确定这些关键单元在固定放置区中的位置,实现大尺寸芯片的时序收敛.基于所提出的三维集成电路设计流程完成了一款三维集成的网络路由芯片基板芯片的设计,结果表明,相比传统的设计流程,提出的3D IC物理设计流程可使超大尺寸基板芯片从时序无法收敛优化到可收敛并满足时序要求,验证了所提出的3D IC物理设计流程的可行性.     

快原子轰击质谱电离机理研究

本文通过研究盐类、极性、非极性等三类化合物的快原子轰击质谱行为,进一步地讨论了预电离机理,对非极性化合物的电离机理做了深入的探讨并提出非极性化合物正十六烷的电离机理。     

用最小均方误差对数短时谱幅值估计法增强语音信号

本文主要研究语音增强系统在短时频域内,以对数最小均方误差作为语音幅值估计的准则.对含噪语音进行消噪处理。首先推导了公式,并从理论上作了分析研究.在此基础上作了大量实验,与类似的最小均方误差短时谱幅值估计法(MMSE STSA)作了性能比较.实验结果表明,由MMSE LOG-STSA增强方法得到的语音输出的质量优于由MMSA STSA方法得到的质量.语音的失真度和清晰度均有显著改善,同时大大降低了语音中的“音乐噪声”.     

浇筑水泥的研制

本法以普通硅酸盐水泥为基础,掺入Ｄ型外加济,混匀,制成浇筑水泥,其各项性能指标达到或超过江苏省企业标准（江苏Ｑ／ＪＣ３０２－８６）中的５２５浇筑水泥标准。     

高阶微分中值定理及其应用

利用向量形式的微分中值定理,把一阶微分中值定理推广到全新的高阶微分中值定理,并研究了它的应用．     

反胶束溶液和血红蛋白水溶液相平衡的研究

研究了十六烷基三甲基溴化铵－正庚烷反胶束溶液和牛血红蛋白水溶液的相平衡,探讨了有机相助表面活性剂种类和浓度、水相ｐＨ值、水相离子种类和强度、表面活性剂浓度的影响,适宜条件下,牛血红蛋白的萃取率可达９５％以上。对实验结果从表面活性剂极性头与蛋白质分子间的相互作用和反胶团包溶蛋白质时的空间阻碍作用上进行了解释。     

Cl-、NO3-和SO42-离子对漆酶催化活性的抑制作用

以５,６－二溴－２,３－二氰基氢醌为底物,在ｐＨ值４．５０条件下,用分光光度法考察了Ｃｌ－、ＮＯ－３和ＳＯ２－４离子对漆酶催化活性的影响。发现Ｃｌ－、ＮＯ－３和ＳＯ２－４离子对漆酶的催化活性均有不同程度的抑制作用,其最大抑制率分别可达７５％、３１．４％和１７．１％。动力学研究表明,Ｃｌ－、ＮＯ－３和ＳＯ２－４离子的抑制作用是瞬时完成的,属于竞争性抑制过程,是通过与底物分子竞争漆酶分子中的Ⅱ型铜（Ⅱ）部位实现的。经测定,Ｃｌ－和ＮＯ－３离子与漆酶所形成的复合物其解离常数分别为１．１２×１０－４ｍｏｌ·ｄｍ－３和１．７８×１０－３ｍｏｌ·ｄｍ－３。     

Genomic organization of EDSV strain AA-2

The genomic organization of egg drop syndrome virus strain AA-2 isolated in China is reported here. The genome was found to be 32 838 bp in length, approximately 2 kb shorter than those of the human subgenus C adenoviruses. Analysis of open reading frames indicated that the genes for major viral structural proteins (55 K, Penton base, pⅦ, pⅩ, pⅥ, Hexon, 100 K, pⅧ and Fiber), as well as EP, DNA polymerase and ⅣaⅡ are present in the expected locations in the genome. EDSV possesses no identifiable E3 and E4 regions and most proteins encoded by E3 and E4 regions of other adenoviruses genome were not presented in EDSV.     

Diamond synthesis from a system of chromium-carbide and Ni70Mn25Co5 alloy

In order to ascertain the mechanism of interaction between carbide and metallic catalyst and formation of diamond under high pressure and high temperature, and find a new method to synthesize diamond with special properties, it is necessary to investigate the reaction behavior of different carbides and metallic solvent_catalysts under high pressure and high temperature. A system of Cr-3C-2 powder and Ni 70Mn 25Co 5 alloy in weight ratio of 1∶6 was treated under 6 0 GPa and 1 500℃ for 20, 30 or 60 min respectively. X_ray diffraction of the samples indicated the Cr 3C 2 decomposed partially after high pressure and temperature treatment, and Cr 7C 3, Cr and diamond formed respectively. There was not any trace of graphite in the samples. The result suggested that the separated carbon atoms could form diamond directly without conversion process of graphite into diamond. The observation of SEI, WDX and EDX also showed that diamond crystals were synthesized in the system, which have perfect surfaces and shapes, with the average grain size of about 40 μm. The properties of the crystals are being investigated.